1/12 Atomic City Mercury Friendship 7 - COMPLETE!

More developments - all batteries are now in place. Some relays and inverters have also been added to the right side. Finally, I added a floor, which features heel and toe guards (the latter fashioned using spare B-52 bomb tips) and will eventually serve as the base for the periscope and instrument panel.

http://www.philsmith.us/Mercury17.jpg
http://www.philsmith.us/Mercury18.jpg

Each of the knobs you see on these boxes will have a cable attached to it, which will be quite the drama...

Looking very nice. The first five images, however, do not work.

I've seen a few images of this kit down up in exqusite detail. I really should get this kit, considering my avatar and username.

A few more additions this evening, including the instrument panel camera.

http://www.philsmith.us/Mercury19.jpg
http://www.philsmith.us/Mercury20.jpg

Finishing up with various component boxes. The remaining components, located in the bottom sections, are environmental equipment, mostly tubes, pipes and so forth.

http://www.philsmith.us/Mercury21.jpg
http://www.philsmith.us/Mercury22.jpg

I also started on the instrument panel, which in the case of Mercury must be built up on both sides because the backside is exposed when the hatch is removed. I primed the subassembly to see how things are going. Next, I will paint the multicolored sections, then add knobs and toggle switches. Final bits will be decals of each gauge, clear covers for each, and stenciling.

http://www.philsmith.us/Mercury23.jpg
http://www.philsmith.us/Mercury24.jpg

Phil, did you use the kit instrument panel and just augment it, or are you scratchbuilding the entire interior?

You're doing such clean, precise work ... I'm loving this!

Thanx lad
Pete

Thanks, Pete. The entire interior is being scratchbuilt, it seems, including the instrument panel. The panel in the kit is inaccurate, and is too thick in profile...

Looking forwards to seeing more on this WIP!
It's not until you see the actual components through something like this excellent kit, that you realise the kind of low tech used to originally send people up into space. Having said this, it's not all that different these days, in some respects!

Very detailed and professional work! Anxiously awaiting more!

Added the pitch, yaw, and roll indicators and the clock insturment to the main instrument panel.
http://www.philsmith.us/Mercury25.jpg
http://www.philsmith.us/Mercury26.jpg

New developments. Added the final component to the main instrument panel - the navigation aid with globe.

Also added the right console, which includes, among other things, manual engagement of RCS. The toggles, pull rings and some knobs will be added after painting. These insturment panels are multicolored and will present a significant painting challenge, so I left some of the complex switches off until later.

http://www.philsmith.us/Mercury27.jpg
http://www.philsmith.us/Mercury28.jpg
http://www.philsmith.us/Mercury29.jpg
http://www.philsmith.us/Mercury30.jpg

The main instrument panel is complete, except for some random knobs and pull rings that will be added after painting. Added this evening is the auxiliary panel, which is on the astronaut's left. This panel was a bit of work, to be sure...

I also added these cool hex-nut pneumatic fittings (the silver things), which are apparently aftermarket accessories for armor. These are attached to the pull rings (which will be added later) - the astronaut pulled or pushed these rings to enable or disable his ability to manually control the RCS system. The rings were literally attached to tubing that led directly to the thrusters.

http://www.philsmith.us/Mercury31.jpg
http://www.philsmith.us/Mercury32.jpg
http://www.philsmith.us/Mercury33.jpg
http://www.philsmith.us/Mercury34.jpg

A good deal of this detail will, in fact, be obscured when the model is complete. However, there are four reasons why I am adding so much detail:

1. I love to do it and practice is always good
2. I will photograph the completed assembly before it is inserted into the capsule
3. Depending on the angle of view through the hatch and window, it is very possible cutting a corner will be apparent, and I just can't stand that
4. I'm learning a lot about my subject matter

Next up: Periscope and instrument panel mount

Phil,

As usual, your work is impeccable! Thanks for sharing. Hope to see it in person soon.

 

Rob

Iwata Padawan

The instrument panel mount and periscope housing is more or less completed in terms of construction and priming. The things that are missing are a few handles and a casement for navigation documents which will go on the front part of the housing facing the astronaut.

Again, the main reference for scratchbuilding has been NASA's Mercury Spacecraft Familiarization Manual, which contains detailed drawings of all spacecraft components.

I also test fitted the assembly with the aft bulkhead and seat and stuck the whole hing into the capsule to make sure averything fit ok. So far, so good...

I am finally approaching the painting stage, though this will be complicated by the addition of wiring harnesses...

http://www.philsmith.us/Mercury35.jpg
http://www.philsmith.us/Mercury36.jpg
http://www.philsmith.us/Mercury37.jpg
http://www.philsmith.us/Mercury38.jpg
http://www.philsmith.us/Mercury39.jpg
http://www.philsmith.us/Mercury40.jpg

So far, this has been an absolute joy to build!

Added environmental greebly. The open-ended pipe will lead to a ribbed flexible hose that ends up behind the instrument panel for cooling purposes:

http://www.philsmith.us/Mercury42.jpg
http://www.philsmith.us/Mercury43.jpg

I also modified the floor opening for the persicope, which from now photos indicates a square feature surrounded by small junction boxes:

http://www.philsmith.us/Mercury44.jpg

Painting of the instrument panel has begun. As those who are familiar with the Mercury Program know, the instrument panel was color coded using Earth tones. It is rumored that John Glenn was responsible for this, but there is no confirmation that is true.

In any case, it is a major challenge to airbrush these sections, as I expected. But I did not want to paint the panels before gluing all the switches on, because the glue could mar the finish. On the other hand, I could not paint the assembly with all the switches in place. So I had to make a compromise.

So far, so good. I will just need to do some very minor touchups with a brush at the end. I expected much worse...

http://www.philsmith.us/Mercury45.jpg
http://www.philsmith.us/Mercury46.jpg

When I complete the basic painting of the panel, I will describe the colors used for those interested in building a model of the Mercury.

Astrazoic wrote:

Painting of the instrument panel has begun. As those who are familiar with the Mercury Program know, the instrument panel was color coded using Earth tones. It is rumored that John Glenn was responsible for this, but there is no confirmation that is true.  When I complete the basic painting of the panel, I will describe the colors used for those interested in building a model of the Mercury.

I wonder why it was earth tones. Maybe because it was easier on the eyes in the harsh natural sunlight?

You are doing a superb job on this, Astrazoic. My compliments.

Basic painting of the instrument panel is complete. What remains are the periscope display, knobs and switches. Next, I will affix decals, which include analog dials and stencils. Finally, I will add clear plastic disks in each dial. Once done, I will paint the other side and begin the process of adding the wire harness.

http://www.philsmith.us/Mercury48.jpg

Following is the same image, but with paint colors used. All paints are Polly Scale acrylics over Tamiya Gray Primer. Mix ratios are unclear - I eyeballed it, mostly because different photos show different values. I aimed for "close enough" here.

http://www.philsmith.us/Mercury47.jpg

Made some progress on the instrument panel. The panel and periscope alone constitute a model, it seems. I'm still far from finished with this assembly. By far, the most difficult, or the most frustrating, are the toggle switches and transparent toggle guards.

The dials are decals made from diagrams of the panel itself from the NASA Mercury Familiarization Manual. Clear plastic disks will eventually be pushed into the circular recesses.

I also successfully printed out some stencil decals for all the switches. Application of these decals is going to be an adventure, to be sure.

http://www.philsmith.us/Mercury49.jpg
http://www.philsmith.us/Mercury50.jpg

 

Very nice work there!

Mike

Simply outstanding!  I have this in my stash, and I only hope when I get around to it that I am able to do even a fraction of job you're doing.  Thanks for continuing to share your progress.

Out of curiousity, what printer are you using for decals?  What decal stock for printing?

Cheers, Rick

Thanks, gentlemen!

Decal stock is the Testors kit (I threw away the container that held the paper). I used the Testors decal bonder to seal the decal film. The printer I use is a Hewlett Packard HP Photosmart 2610. I used PowerPoint to adjust the size of the diagram and printed directly from this document. I'm too lazy to muck around with the images in Illustrator or Photoshop :)

The first class your work to here. respect!

 

Greetings from Germany, 

Thomas

Amazing work on the instrument panel.

Using my best Michael Dorn Klingon voice, "Impressive!"

Mike

Thanks, my friends. I'll be posting some pictures this week of the finished assembly.

reeeallynice work, love to see true miniatures, can't wait for more! Oh, several posts back, love that logic (4 reasons) for including obscured detail.

Amazing the construction..... all in scratch? Cool! Where did u get the blueprints?

[]´s

Thanks!

This has been my main resource:

Project Mercury Familiarization Manual (November 1961):

(http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19740076527_1974076527.pdf)