Re: M-7 Priest WIP - FineScale.com Forums

We have made some big changes at FineScale.com. Learn More.

FineScale.com forums are FREE. If you wish to participate you must LOGIN | REGISTER.

Welcome to FineScale.com Forums

Faq | Login | Register

Armor

Started by scratchmod at 07-05-2009 8:21 AM. Topic has 81 replies.

Page 4 of 5 (82 items)

< 1 2 3 4 5 >

Sort Posts:

07-05-2009, 8:21 AM

scratchmod

Joined on 02-27-2009
mass,USA
Posts 494

Re: M-7 Priest WIP

	Yep what everyone has said. This baby is coming along nicely, and nice job on the tracks too. Rob
			Report Abuse

07-05-2009, 12:00 PM

wbill76

Joined on 07-08-2004
Texas
Posts 7,236

Re: M-7 Priest WIP

	Making good progress on this one Stephen! The track fix is a good one, can't tell you made any modifications in the pics at all. http://www.bpmodels.net
			Report Abuse

07-05-2009, 5:21 PM

T26E4

Joined on 11-09-2005
Posts 2,380

Re: M-7 Priest WIP

	Yep. It's coming along nicely. One thing you might want to attend to are the return rollers. You've painted them blackish -- I guess because you're assuming they were rubber tires. In reality they were all metal -- and should be painted like the idler wheel (worn metal sides, some rust) . Hope this helps Roy Chow AMPS 1st Vice President http://www.amps-armor.org
			Report Abuse

07-06-2009, 6:29 AM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Figure freak, HVH, ScratchMod and WBill- I appreciate the comments and for looking in. I'm happy I didn't mess the tracks up and they came out as well as they did. HVH I do have a little dio planned for this one. Redleg and T26e4-Thanks for the tips. T26 I looked at my references and it was hard to tell whether the return rollers were rubber or steel so I did go for the rubber look. Darn B&W photos! Should be an easy fix though. Redleg, I'm assuming the lanyard is attached to the breech block, Is that correct? Can you be more specific on it's location? Well, all that's left are the tools, handles and other small fixtures, final weathering and a dullcoat. Hopefully will be finished by this weekend. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

07-06-2009, 7:36 AM

redleg12

Joined on 07-09-2006
New Jersey
Posts 2,416

Re: M-7 Priest WIP

NucMedTech wrote:

Redleg, I'm assuming the lanyard is attached to the breech block, Is that correct? Can you be more specific on it's location?
-Stephen

The firing lock is on the back of the breech block (side where the handle is)

The open sections on the block is where the "handle" or firing lock is normally. The lanyard is connected to that handle.

Rounds Complete!!

"The Moral High Ground....A Great Place to Emplace Artillery."

My Artillery Collection for your Review:
http://s177.photobucket.com/albums/w226/redleg12/redleg12%20collection/

Report Abuse

07-06-2009, 1:32 PM

Hans von Hammer

Joined on 06-26-2008
Iowa
Posts 5,769

Re: M-7 Priest WIP

	Quick & Dirty Sketch of where the lanyard hooks in.. The small circle-area on the right-hand drawing is the firing lock. Colonel, 55th FG Great Plains Wing Commemorative Air Force
			Report Abuse

07-06-2009, 1:42 PM

Vit13

Joined on 07-10-2008
South of france
Posts 33

Re: M-7 Priest WIP

	Nice works To answer to your question the new Revell M7 1/35 is a rebox of the Italeri kit.
			Report Abuse

07-07-2009, 6:17 AM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Redleg and HVH- Once again guys you've come through. The pics and diagrams are very helpful and duly appreciated. Vit13-Thanks for checking in. I've never built the Italeri kit anyone know how it compares with the Academy offering. Just looking at the box art the Italeri/Revell kit is a later version. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

07-07-2009, 7:26 AM

wing_nut

Joined on 04-13-2005
Piscataway, NJ!
Posts 8,024

Re: M-7 Priest WIP

	Couldn't tell youif anything is wrong or not on the model... but i can tell you it looks really nice and I almost feel the need to put my fingers in my ears when you the string that makes gun go boom. Marc
			Report Abuse

07-07-2009, 9:00 AM

deafpanzer

Joined on 04-06-2009
Carmel, IN
Posts 273

Re: M-7 Priest WIP

	Looking GREAT! It was fun following your process. I have the exact same kit in the stash and now I am tempted to build it as soon as I am done with one I am working on (M24 Chaffee). I am very slow builder... I just wanted to let you know that I have bookmarked your forum because I have learned a great deal from this. Thanks for sharing your process with us! Andy
			Report Abuse

07-08-2009, 6:42 AM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Wing-nut- Thanks for checking in! Appreciate the kind comments. Deafpanzer- Never thought of my builds as a teaching device. Always thought of myself as to much of a novice at this, but perhaps I've gotten farther in my build qualities than I let myself believe. I'm glad that this has inspired you to get yours going (once your done with the Chaffee). I must say though this would not have turned out this well if not for the help and guidance of the people on this forum. Thanks for looking in. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

07-14-2009, 9:32 AM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Okay, I'm in the home stretch. Just a few more things to do and fix and it will be finished. I figure I'm about 98% done. I know I still need to attach the pantel, lanyard, M2 and accessories. Final weathering will be done when I add it to the base. (if you like you can follow that up in the dio forums, coming soon.) Still have to fix the return rollers as T26 mentioned. Well on to the pics. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

07-14-2009, 1:40 PM

wbill76

Joined on 07-08-2004
Texas
Posts 7,236

Re: M-7 Priest WIP

	Nicely done, now it's over to the dio stage for the base...but feel free to post here with your updates so we can see it all as it comes together! http://www.bpmodels.net
			Report Abuse

07-14-2009, 7:18 PM

redleg12

Joined on 07-09-2006
New Jersey
Posts 2,416

Re: M-7 Priest WIP

	Very nice....since we are counting rivits, the ammo fibers (black canisters) are cardboard tubes with thin metal caps (top flat section). When they are painted, the cardboard is flat black while the metal caps are a semi gloss....just one of those anal artillery details Glad to see you are moving along nicely!! Rounds Complete!! "The Moral High Ground....A Great Place to Emplace Artillery." My Artillery Collection for your Review: http://s177.photobucket.com/albums/w226/redleg12/redleg12%20collection/
			Report Abuse

07-14-2009, 7:39 PM

Pvt Mutt

Joined on 08-19-2008
S.W. Missouri
Posts 577

Re: M-7 Priest WIP

	You Texas boys do pretty good work I just got to say it. Waiting for the more to come part. Tony the Mutt Shoot Low Boys They're Ridin Ponys
			Report Abuse

07-15-2009, 12:39 PM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Wbill-Thanks for looking in. I don't mind working up the dio over here as long as other people are okay with it. Keeps me from having to post twice. Redleg- Hold your fire, I don't know if I'm up to counting rivets yet. Just trying to improve on my accuracy with my models. Appreciate the heads up on the cannister ends though, I'll go back and fix them. Just have to find some semi-gloss paint. Pvt Mutt- I appreciate the kind comments and yes we do have some talented builders down here in Texas. One day I'll be one of them. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

07-15-2009, 1:08 PM

T-rex

Joined on 02-25-2007
Calgary, Alberta, Canada
Posts 871

Re: M-7 Priest WIP

	Very nice, I like the well painted rifles on the rack and the mud o the front. Been awhile since I've been here but computer hasn't allowed me to post photos, which is why I haven't updated on my builds. Working on: Finishing SU-85 Dio (1/35), German mine roller (1/35) Revell's Voodoo (1/48) And Tamiya F-15 (1/48)
			Report Abuse

07-15-2009, 4:35 PM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Nice to hear from you T-rex, it has been awhile. Thanks for taking the time to look in on my model. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

07-15-2009, 4:58 PM

terry35

Joined on 05-11-2005
Dublin Rep Of Ireland
Posts 1,563

Re: M-7 Priest WIP

	Hi, stephen, great progress so far, looking reallyy cool. Don't know much about allied armour but I like your work on this. Terry.
			Report Abuse

07-16-2009, 7:24 AM

NucMedTech

Joined on 09-13-2006
Central Texas
Posts 561

Re: M-7 Priest WIP

	Terry- Thanks for looking in. This is my third US armor build and 2nd artillery piece, so I'm learning (or making it up) as I go along. Although it would not be this good if not for the help I recieved here. Still doing some small detail work, it seems I keep finding things to do on this model. Oh well I get some more pics up this weekend I hope to start on ground work and figures this weekend. -Stephen Most barriers to your successes are man made. And most often you are the man who made them. -Frank Tyger
			Report Abuse

Page 4 of 5 (82 items)

< 1 2 3 4 5 >

FineScale.com Forums » Modeling Subjects » Armor

Forum Jump: