SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Hello everyone from northwestern wisconsin

1972 views
23 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Friday, December 24, 2021 3:54 AM

Well my salty brother, I wish you and yours all the very best for Christmas and the new year and good luck with the surgery mate.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    August 2021
Posted by lurch on Wednesday, December 22, 2021 8:34 AM

Hey Dodgy I never knew anybody in the Royal Australian Navy. Guess I do now.Thats pretty cool. I did 12 years in the U.S.Navy. I suppose you can call us salty brothers now.  HaHaHa

  • Member since
    August 2021
Posted by lurch on Sunday, December 19, 2021 4:08 PM

Thank you Tom. Having surgery in mid Jan. to remove it hopefully that will be it.Wish you all the best with your biopsy. Hope you have a great Christmas and New year as well.

  • Member since
    July 2015
Posted by MR TOM SCHRY on Sunday, December 19, 2021 3:52 PM

So sorry to hear about your cancer diagnosis and I wish you the best.  I recently had a procedure done and I'm waiting for the results of the biopsy.  Hope that you have a Merry Christmas and my thoughts and prayers go with you.

TJS

TJS

  • Member since
    August 2021
Posted by lurch on Sunday, December 19, 2021 11:43 AM

I was given a couple of planes last year. I havent tried them yet. I would like to get a float plane . I just havent had time to do anything lately. Perhaps this summer I will get things going. I wont to get a couple of boats but havent found any that I like. I january I will be out of commishion for a couple of months. I recently found out that I have prostate cancer and have to have surgery so will be laid up for a while from that. Maybe get some small things done then.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Saturday, December 18, 2021 9:55 PM

Have you tried RC Helos?  I have a couple including a TREX 450 and it scares the heck out of me but they are fun and invigerating to fly and full 3D capable.  I turned it upside down once or twice.  I still have a few planes - gas and electric and a few toyish RC cars.

Are you looking at power boats?  Had a friend that built RC hydroplanes but man you need some room and flat water to run those.

Thanks,

John

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Saturday, December 18, 2021 9:50 PM

Sounds beautiful Lurch! There a number of ex-navy blokes here. I'm ex Royal Australian Navy.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    August 2021
Posted by lurch on Saturday, December 18, 2021 7:33 PM

I am in Cameron. Bloomer isnt to far away from here.About a 30 to 45 min drive i think. Only been here 2 1/2 years and still learning the area. I am origaly from St. Paul Mn. un til I met my wife.She transplanted me here. Have a great house on a lake and loving it.

  • Member since
    January 2017
  • From: Colorado Springs
Posted by mawright20 on Saturday, December 18, 2021 7:11 PM

What part of NW Wisconsin? I have a friend from Bloomer.

  • Member since
    August 2021
Posted by lurch on Friday, December 17, 2021 10:07 AM

The welcome I have recieved so far has been great. Some of you even have a sense of humer. I like that. I also see there is a few people from other countries and I think that is fantastic.I am looking forward to learning alot and improving my modeling skills. I said earlier that I also do rc vehicles of all sorts cars, trucks, planes, and now will be starting boats. I think this web site is going to be fun as well as educational. Posibly will be able to make now friends and hopefully meet a few.

  • Member since
    August 2021
Posted by lurch on Friday, December 17, 2021 9:59 AM

Yep can get cold from time to time but I enjoy it most of the time. You should visit here sometime.

  • Member since
    August 2021
Posted by lurch on Friday, December 17, 2021 9:58 AM

Yes Dodgy I am ex navy. I did 12 years total. I would have done more but they have an issue if you are a single parent . 

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Friday, December 17, 2021 8:43 AM

Brrrr;

     Northwestern Wisconsin! The cold weather there is a good time to snuggle up with a Good Fine Scale Modeler and Build, Build, Build! Welcome Aboard!!

  • Member since
    June 2018
  • From: Ohio (USA)
Posted by DRUMS01 on Thursday, December 16, 2021 11:25 PM

Hello and welcome to the "group". Our group therapy normally is model building that we share with one another in the forum (smile). 

Glad to have you here.

Ben

"Everyones the normal until you get to know them" (Unknown)

LAST COMPLETED:

1/35 Churchill Mk IV AVRE with bridge - DONE

NEXT PROJECT:

1/35 CH-54A Tarhe Helicopter

 

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Wednesday, December 15, 2021 7:30 PM

G'day Lurch and welcome. Lots of good advice and good people here. You mentioned being on a carrier, so I gather you are ex navy?

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    August 2021
Posted by lurch on Wednesday, December 15, 2021 6:42 PM

Thanks for the warm welcome from everyone. I started doing rc when i was on an aircraft carrier in the mid 80,s. I still have 2 of the 3 originals that I started with. I have a pretty good collection now my wife thinks I am just a big OLD kid now. but thats ok atleast I have lots of fun. Have 4 grandkids with another one on the way due in Feb. I still enjoy doing static models of all types of subjects and plan on doing some diaramiams and learning to doing scratch building.I have been reading mags on modeling for many years and have learned many things from them.

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Wednesday, December 15, 2021 12:13 PM

Hi Lurch! Welcome to the Forums and welcome back to the hobby. 

Used to race R/C cars, planes and boats back in the '70s. Boats were electric scale and sailboats. Raced the sailboats up and down the east coast. Lots of fun but got too expensive.  When flying planes, they flew great but many didn't survive the landings.Wink That's when I switched to sailboats. Never lost one.

Lots of great people here. You need help, just ask.

Jim Captain

Stay Safe.

 

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Wednesday, December 15, 2021 10:51 AM

lurch
 

Getting back into my hobbies after a ten year break . I have checked out your forums and I am very impressed with it all. I am also into collecting and racing rc cars and trucks. I am currently buildinga hobbyspace . I will be needing advice on certain things and I am sure I will get the  help I need from here. So thanks in advance for any help I recieve here. 

Welcome back to the hobby, Lurch, and welcome to the forum!  I love that handle!

The bigger the government, the smaller the citizen.

 

 

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Wednesday, December 15, 2021 9:46 AM

Welcome to the forum

  • Member since
    July 2015
Posted by MR TOM SCHRY on Wednesday, December 15, 2021 9:44 AM

Greetings from Oshkosh, WI and welcome back to the hobby!  You'll find the best advice and assistance from the modelers on this forum.  May I suggest that if you can, try to attend the Region #5 Model Contest in Madison this coming March 2022 and the Modeling Phanatics contest in Eagle River in May 2022.  Great models for inspiration/motivation and you can't beat the deals at the vendors.

TJS

TJS

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Wednesday, December 15, 2021 9:44 AM

Welcome!  Used to race RC buggies & trucks way back - Associated RC-10 original gold aluminum pan.  

Man 'Northwest Wisconsin' just sounds cooooold!

Thanks,

John

  • Member since
    August 2021
Posted by lurch on Wednesday, December 15, 2021 9:01 AM

Thank you. I am looking forward to this very much

  • Member since
    May 2020
  • From: Omaha, Nebraska
Posted by learmech64 on Wednesday, December 15, 2021 8:58 AM
Welcome to the forum and welcome back to the madness. There is plenty of advice to be shared here. One just needs to ask.

Doug

  • Member since
    August 2021
Hello everyone from northwestern wisconsin
Posted by lurch on Wednesday, December 15, 2021 8:08 AM

 

Getting back into my hobbies after a ten year break . I have checked out your forums and I am very impressed with it all. I am also into collecting and racing rc cars and trucks. I am currently buildinga hobbyspace . I will be needing advice on certain things and I am sure I will get the  help I need from here. So thanks in advance for any help I recieve here.

 

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.