SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

What do you do for a living?

17694 views
149 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2014
What do you do for a living?
Posted by modelcrazy on Sunday, July 12, 2015 10:28 AM

There have been threads asking where you live, when do you model and so on. When I talk to friends and family about this forum, they are fascinated to find out that so many members come from so many places around the world.
I also tell them some of the careers of the members, that I know of and they are equally fascinated.
I know we have Military members from all over the world, Teachers, Professors, IT specialists, Police, Highway Patrol Dispatchers, Architects, general laborers and retired persons who had fascinating careers.
I don't know if this has been asked before, but what do you do for a living?

I was an aircraft mechanic, electronics technician in the Coast Guard, general contractor, home builder, 48 state over the road truck driver, built High Voltage Cabinets for locomotives, and now back to electronics technician.

Steve

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2015
Posted by Scarecrow Joe on Sunday, July 12, 2015 11:25 AM

I am a doctor, an Adult Neurologist specialist. Graduated from it in 2003, am 43 years old. (and counting...LOL!)

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Sunday, July 12, 2015 11:44 AM

I currently work in an ACE Hardware store. I have been there for 5 1/2 yrs. Fun place to work especially if you build plastic models. Discount  on all sorts of handy material. Prior to this job I worked in wildland fire management for the U.S. Forest Service for 25 yrs. I worked as an eingine boss, crew boss, assistant fire management officer and battalion chief. Absolutely loved that job but, I resigned in 2008 so that I could be at home regularly and enjoy life with my new wife at the time. No regrets.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Sunday, July 12, 2015 11:45 AM

Yes,there is an old thread floating around somewhere.

I was a HVAC Service Technician with the local utility for 27 years,this also included repairing other gas and electric appliances and responding to emergencies like gas leaks,co leaks,delayed ignitions,and explosions.

For the past 10 years I switched over to planning the work assignments and dispatching those same techs.I work an around the clock swing shift.

  • Member since
    August 2008
Posted by tankerbuilder on Sunday, July 12, 2015 12:16 PM

Well ;

  Let's see .13 1/2 yrs Navy - 13 yrs Marine .Then Aircraft transport pilot  , Contractor , Truck Driver ( my own Company ) .Wrecker driver- Ditto , And Real Estate developer .and Teacher .  Liked being teacher best . I worked with our Boys and Girls who lost hands and fingers in Desert Storm .

    Best group of students ANY teacher could have . And taught Reading and Writing to Adults in the business world . Then and now I still do Model Building commissions . Primarily ships . Started as a hobby at 7 and stayed with it through all of it . Now 72 and still going kind of strong .

       I did forget one very important time . My eight years with an Oil Company as a ship captain then owning oil skimming , spill clean -up boats. A lot of these jobs overlapped in time because I didn't believe that sitting on ones duff made any real money !

  • Member since
    January 2014
  • From: Nampa, Idaho
Posted by jelliott523 on Sunday, July 12, 2015 1:28 PM

My first job was working for a sign company.  At the time I started, painting signs by hand and mixing paint to match colors was still the norm.  Vinyl decals was in its infancy.  I did this job off and on for about 10 years.  I then worked at a cemetery for about 3 years.  Was a professional firefighter/EMT/hazardous materials technician for 12 years until I had to get out due to a medical issue.  Now I am a supervisor for the State of Idaho Emergency Communications Center.  We are a one-stop-shop for assisting local, state and federal resources in the event of an emergency.

On the Bench:  Lots of unfinished projects!  Smile

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Sunday, July 12, 2015 1:45 PM

Howdy!

That's right, this thread is really interesting! I, for myself, graduated electronics engineering in Poland where I live. Then, for some time I went to Germany to develop electronic "black boxes" for the new Volkswagens. Then returned to Poland while keepieng the job. Last year I switched jobs and now I work for Volkswagen directly in my home town, helping to introduce new car models to the production line. And I see modelling helps me do a better job at work. Thanks for reading and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Sunday, July 12, 2015 2:37 PM

To my fellow forum members,

Played jazz starting at 13yrs. old, executive chef, executive sushi chef, waiter, Sears paint dept, restaurant manager, general contractor, factory worker, and now retired starting from this date 5/5/10.  Now I'm just learning how make model kits and trying to keep up with everyone at this wonderful forum.

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    May 2013
  • From: From the Mit, but live in Mason, O high ho
Posted by hogfanfs on Sunday, July 12, 2015 2:45 PM

From '89 to '95 I owned a small commercial cleaning company. But, since '96 I have been an Engineering/CAD/PLM  Systems Administrator for many different automotive and aerospace companies. Right now, I'm back in school to get an associates in Software Engineering and Mechanical Design.

 Bruce

 

 On the bench:  1/48 Eduard MiG-21MF

                        1/35 Takom Merkava Mk.I

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, July 12, 2015 3:07 PM

I enlisted in the Army right out of High School and served 24 years between Active Duty and National Guard before retiring from Uncle Sam After my stint in the Regular Army, and a few jobs I started in Law Enforcement and have been doing that for over 26 years now... 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    March 2013
Posted by patrick206 on Sunday, July 12, 2015 3:11 PM

33 year career commercial pilot, age 74, long retired in wet Western Oregon. Active modeler since about age 7 or 8, mostly WWll and some modern military/civilian jets. Many years a volunteer mentor for children in public schools, those that have fallen behind in academic abilities and at risk of failure. Wonderful experience, highly recommended for anyone that has the time to devote to it.

Patrick

  • Member since
    December 2011
Posted by Chrisk-k on Sunday, July 12, 2015 3:14 PM

I'm a professor at a private university, teaching graduate classes and doing academic research.

Iwata HP-CS | Iwata HP-CR | Iwata HP-M2 | H&S Evolution | Iwata Smart Jet + Sparmax Tank

  • Member since
    October 2007
  • From: Louisville, KY
Posted by pordoi on Sunday, July 12, 2015 3:26 PM

Chrisk-k

I'm a professor at a private university, teaching graduate classes and doing academic research.

 

So am I; in the field of Microbiology.

Don

  • Member since
    September 2012
Posted by GMorrison on Sunday, July 12, 2015 3:37 PM

Licensed Architect, work for a firm that specializes in architectural signage and graphics. Do cool stuff like AT&T Park.

 Modeling is an excuse to buy books.

 

  • Member since
    May 2003
  • From: Greenville, NC
Posted by jtilley on Sunday, July 12, 2015 3:51 PM

When I got out of grad school (Ohio State, 1980) I landed a job in a maritime museum. Three years later I got hired to teach history at East Carolina Univversity. I'm now on "phased retirement," teaching half-time and collecting my pension. Next May I'll retire completely.

Youth, talent, hard work, and enthusiasm are no match for old age and treachery.

  • Member since
    April 2013
Posted by KnightTemplar5150 on Sunday, July 12, 2015 3:57 PM
I attended university studies on a four year US Army ROTC scholarship and picked up a degree in Journalism before my service. Thanks to modeling, I was hired on as an apprentice goldsmith after getting out and spent a number of years as a bench jeweler. After marrying my first wife, I took a position in a pewter company, where I did pattern design, mold making, casting, and finishing for custom pieces. Following my divorce, I put my degree to work as a newspaper reporter and discovered that writing just didn't pay the bills, so I went to work for a military aerospace subcontractor building electronics. After six months, I was promoted to production manager and stayed in that position until last fall when the company folded (owner ran for state senate). Currently back in college business administration studies, but seriously looking at also picking up some classes in computer assisted drafting to see what 3D printing can do for me in the future.
fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Sunday, July 12, 2015 4:09 PM

While in my Junior year in H.S. (1957) my dad took me to the personal director of the refinery where he and my grandfather worked and said "This is my son and I would like him to work here".  As Nepotism was alive and well back then, the director said "The day you graduate, come in and you have a job".  As a result, I worked for the same company, in many different positions, for 36 years, ending up as the Senior Lab Technician in their Chemical Division labs.  My dad retired after 50 years with them (started @ 15) and my grandfather retired after 53 years (started @ 12).  You can't do that any more.  The only reason I retired early was due to health related issues.

Jim   Captain

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    July 2008
  • From: Summerville, SC
Posted by jeffpez on Sunday, July 12, 2015 6:10 PM

I've been a stock broker since 1976 and started building models around 1958 at 10 years old. I've stopped a few times but I'm still building and helping people to invest.

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Sunday, July 12, 2015 8:32 PM

Registered Professional Electrical Engineer, State of Wisconsin.  I worked for big world wide corporations ( Eaton, Siemens, Philips) as an application engineer for adjustable speed drive systems and controllers for many diverse industrial applications, as well as surface mount technology for high speed circuit board production.  Retired in 1999.

Gimme a pigfoot, and a bottle of beer...

  • Member since
    January 2013
Posted by BlackSheepTwoOneFour on Sunday, July 12, 2015 8:34 PM

Media Specialist in Instructional Support Services for BOCES for 25 years now.

  • Member since
    February 2011
  • From: St louis
Posted by Raualduke on Sunday, July 12, 2015 8:53 PM

Carpenter. 35 years .retired

  • Member since
    June 2015
Posted by Axeman on Sunday, July 12, 2015 9:18 PM

Health issues (Lymes disease and R.A.) have me retired since 2013,though i'm only 51 Surprise

spent most of my working years as a trim carpenter,and/or trim contractor,though i also worked as a surgical assistant,screen printer,cook,shipping clerk,assembly tech.,and apprenticed to a luthier in 2008......which i still do,luthiery that is,i just dont make any money at it Confused

  • Member since
    June 2015
Posted by Ron777 on Sunday, July 12, 2015 9:19 PM

Currently I build wings for 777's

  • Member since
    October 2004
  • From: Northern Virginia
Posted by ygmodeler4 on Sunday, July 12, 2015 9:33 PM

I work part time selling firearms, just graduated in may and still looking for something

-Josiah

  • Member since
    July 2008
  • From: Vancouver, the "wet coast"
Posted by castelnuovo on Sunday, July 12, 2015 9:59 PM

First job was a navigator in a merchant marine, busboy/waiter/bartender, personal trainer for 15 yrs, now working as a physio.

  • Member since
    February 2007
Posted by mitsdude on Monday, July 13, 2015 2:16 AM

Marine Biologist PhD with NOAH for 5 years. Had a young family and wanted to settle down. Got tired of being at sea for 1-2 months three times a year. Young and single when I started. Turned out to be not what I expected. having said that I do wonder where I would be now if I'd stuck with it. Science/technology  teacher retired after 30 years. Currently working in IT/tech support.

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Monday, July 13, 2015 7:51 AM

Airline pilot. 737's for the last 23.5 years. 8+ years in the Air Force before that. Flew C-23 and C-5 after training.

  • Member since
    February 2003
  • From: Green Bay, WI USA
Posted by echolmberg on Monday, July 13, 2015 8:34 AM

Professional chocolate taster for Hersheys.  Just kidding but I sure wish!

I graduated from college in '96 with a degree in urban planning but right around the day I graduated is the same day when I realized I didn't want to deal with that for the rest of my life.  

I'm a CAD Designer for a large commercial furniture manufacturer.  I create 3D solid models on the computer using Creo (formerly known as Pro-E).  It's pretty neat when, every once in a while, I get to see some of the parts cranked out on the 3D printer.

Eric

  • Member since
    August 2008
Posted by tankerbuilder on Monday, July 13, 2015 11:09 AM

Hey Stik ;

Thank You .There's not many that would do that job ! My respect is there and my hat is off to you !

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, July 13, 2015 12:18 PM

Thank you Tanker. I cant see myself doing any other careers than the ones that I have done. I've been fortunate enough to do those things that I played at as a young boy. And make a living while doing so! You cant ask for much more than that.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.