SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tamiya AS-28 Medium Gray equivalent?

512 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2014
Tamiya AS-28 Medium Gray equivalent?
Posted by bluenote on Wednesday, October 13, 2021 8:15 AM

Hi everyone, I'm using Tamiya's AS-28 Medium Gray in a spray can.  There is a bottle version called medium grey, (XF-20), but it's not the same.

Would anyone know the paint mix ratios for AS-28 so that I can brush paint some details?  I don't want to decant, but would prefer to mix.

Thanks!

  • Member since
    April 2020
Posted by Eaglecash867 on Wednesday, October 13, 2021 9:11 AM

You could always decant some of the AS-28 from the spray can.

"You can have my illegal fireworks when you pry them from my cold, dead fingers...which are...over there somewhere."

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Wednesday, October 13, 2021 9:20 AM

You might want to ask in the Painting & Airbrushing forum, too:

http://cs.finescale.com/fsm/tools_techniques_and_reference_materials/f/18.aspx

The bigger the government, the smaller the citizen.

 

 

  • Member since
    June 2014
Posted by bluenote on Wednesday, October 13, 2021 9:30 AM

the Baron

You might want to ask in the Painting & Airbrushing forum, too:

http://cs.finescale.com/fsm/tools_techniques_and_reference_materials/f/18.aspx

 

Ah, thanks for that.  Can the mods move this?

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Wednesday, October 13, 2021 7:00 PM

Believe me, it doesn't matter.  There are hundreds, if not thousands, of grays, and you can mix them yourself.  

Tamiya just wants to sell you another bottle of paint.

Computer, did we bring batteries?.....Computer?

  • Member since
    September 2021
Posted by DooeyPyle67 on Wednesday, October 13, 2021 7:42 PM

Not all Medium Grey are alike no matter the brand of paint. In your case, it makes no difference whether it's Tamiya lacquer or Tamiya acrylic. It's still the same color and shade.

  • Member since
    April 2020
Posted by Eaglecash867 on Wednesday, October 13, 2021 7:52 PM

Quick shot from the spray can into a little paper Dixie cup while you're outside...boom...done...brushable paint that is exactly the same color with no mixing.

"You can have my illegal fireworks when you pry them from my cold, dead fingers...which are...over there somewhere."

  • Member since
    October 2013
Posted by chops1sc on Thursday, October 14, 2021 12:48 PM

I ran into this same issue. I am working on Tamiya's F-16C/J and the nose cone calls for AS-28. I use Mission Models paints and they dont have an equivalant. They do have a med. grey but it didn't look the same (from what I saw online). I ended up mixing 2 different MM greys to get what I felt was correct.

  • Member since
    June 2014
Posted by bluenote on Thursday, October 14, 2021 2:33 PM

Thanks everyone for your help.  I'll just decant a bit of it, seems easier.

 

  • Member since
    April 2020
Posted by Eaglecash867 on Friday, October 15, 2021 5:30 AM

chops1sc

I ran into this same issue. I am working on Tamiya's F-16C/J and the nose cone calls for AS-28. I use Mission Models paints and they dont have an equivalant. They do have a med. grey but it didn't look the same (from what I saw online). I ended up mixing 2 different MM greys to get what I felt was correct.

 
Just a quick note on the Viper radome.  There isn't really a "correct" color, since the radome is painted with a rubberized coating (traditional paint interferes with radar energy) that tends to absorb all kinds of stuff from whatever environment each, individual Viper is operating in.  Even airframes in the same squadron will often show a variation due to relative age.  You have a lot of leeway with radome color.  With my Tamiya F-16CJ, IIRC, I think I started with a basecoat of dark gull grey, and then gradually built up a layer of Tamiya X-19 Smoke over the top of it until it was a good match for photos of the exact airframe I was building.
 

"You can have my illegal fireworks when you pry them from my cold, dead fingers...which are...over there somewhere."

  • Member since
    October 2013
Posted by chops1sc on Friday, October 15, 2021 7:18 AM

Eaglecash867

Just a quick note on the Viper radome.  There isn't really a "correct" color, since the radome is painted with a rubberized coating (traditional paint interferes with radar energy) that tends to absorb all kinds of stuff from whatever environment each, individual Viper is operating in.  Even airframes in the same squadron will often show a variation due to relative age.  You have a lot of leeway with radome color.  With my Tamiya F-16CJ, IIRC, I think I started with a basecoat of dark gull grey, and then gradually built up a layer of Tamiya X-19 Smoke over the top of it until it was a good match for photos of the exact airframe I was building.

 

 
That makes sense. I am glad I made the effort to make it different. I was going to paint it the same as the fuselage and wings. I am almost done with it and I will be sharing soon! Thanks!
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.