SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

My builds for 2021

1435 views
23 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2008
  • From: Central Florida
My builds for 2021
Posted by plasticjunkie on Tuesday, December 28, 2021 8:41 AM

 Was hoping to bring down the stash size but was only able to build just a few models this year.

This was my last build for 2021, a commission of the huge 1/32 Revell F4E. 

Trumpeter 1/32 Bf109K with lots of scratch work in the pit and engine.

Lots of plumbing and wires were added

Next was the old 1/48 Revell F14A comission in Iranian colors.

Then another cat, 1/48 F14A from  Testors with AM decals. Great fit but missing some details.

The 1/48 Revell F84 was a joy to build, having great detailing and fit. The Alclad went down as usual. I used Gauzy shine enhancer to protect the Alclad and love the product.

This little guy is a 1/144 Revell Type II/B U Boat. I think it’s an ex ICM mold.

 

Got away from planes doing this 1/35 AFV Club 8 rad radio car with Dragon crew. 

I hope to have more models built in 2022. Have a safe and healthy New Year!

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    July 2015
Posted by MR TOM SCHRY on Tuesday, December 28, 2021 9:13 AM

Excellent work!  I like how you mixed it up, building aircraft, armor, and a sub, which illustrates your skills as a builder.  The F-14s look great especially considering the kits that you used.  Your SEA scheme on the F-4 turned out beautifuly. That natural metal scheme on the F-84 just gleams!  Finally, your weathering, figure work, and base for your German radio car make it into an awesome vignette.  What chipping method did you use on the radiocar?

TJS

TJS

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Tuesday, December 28, 2021 9:29 AM

Thanks TJS. I keep pretty well spread out with the building subjects. On the radio car I used cheap hair spray from the Dollar Store for the chipping, using a toothpic and small water dampened brush to attack the hairspray.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Tuesday, December 28, 2021 9:38 AM

Excellent body of work for the year!  Serious skills

Thanks,

John

  • Member since
    June 2014
Posted by BrandonK on Tuesday, December 28, 2021 11:02 AM

Wow, you were busy this year. Well done all around and awesome work on some large kits.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, December 28, 2021 11:42 AM

Great collection there PJ, thats a good years work, especially with those 32nd kits. Love the 8 Rad, great scene there.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, December 29, 2021 6:37 AM

Thanks lads. Bish I have lots of armor subjects  in the stash and will try building more of them in the coming year.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, December 29, 2021 6:48 AM

You deffinetly should looking at that. I need to get some German armour built, its been 2 years.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Wednesday, December 29, 2021 7:13 AM

PJ. beauitfully done, I also have a few tank kits to build its been awhile.

 

 

 Nick.

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, December 29, 2021 8:23 AM

Crown and Bish, a while back Dragon USA had one heck of a special sale with insane low prices and free shipping. I bought a bunch of armor kits, some being new releases but have not seen that kind of sale again. Depending on the kit they included a free boxed set of Dragon figures too.

Would be great to have more armor GBs.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, December 29, 2021 9:02 AM

Fantastic work PJ! Love them all but esp that F-84- the NM is superb!

 

And yeah, Dragon used to do some killer sales. They largely stopped, when the prices are generally higher than Sprue Brothers I kinda drifted away from checking their site. Guess the bright side is I'm less likely now to buy something just because it's on sale.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, December 29, 2021 9:02 AM

plasticjunkie

Crown and Bish, a while back Dragon USA had one heck of a special sale with insane low prices and free shipping. I bought a bunch of armor kits, some being new releases but have not seen that kind of sale again. Depending on the kit they included a free boxed set of Dragon figures too.

Would be great to have more armor GBs.

 

I have gone off Dragon a bit, largely due to high prices for kits which are often many years old, while new companies are bringing out new tools at mush lower prices. For me, Dargon are like Hasegawa a bit, they have gone off the boil and relying on past reputaion. But i will still buy their kits if there is no better option.

The last few armour GB's on here were not taht well supported after loseing a lot of the hardcore armour builders. But it might be worth trying again, just got to find the right subject.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, December 29, 2021 10:09 AM

Gamera

Fantastic work PJ! Love them all but esp that F-84- the NM is superb!

 

And yeah, Dragon used to do some killer sales. They largely stopped, when the prices are generally higher than Sprue Brothers I kinda drifted away from checking their site. Guess the bright side is I'm less likely now to buy something just because it's on sale.

 

Thanks Gamera. Yea the F84 finish came out looking great. The Gauzy product goes on a tad pebbly but levels out within a couple of minutes leaving a rock hard glass smooth finish and doesn't alter the metallic tone.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    July 2008
  • From: Vancouver, the "wet coast"
Posted by castelnuovo on Wednesday, December 29, 2021 10:10 AM

Super work, love them all.

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, December 29, 2021 10:15 AM

Bish

 

 
plasticjunkie

Crown and Bish, a while back Dragon USA had one heck of a special sale with insane low prices and free shipping. I bought a bunch of armor kits, some being new releases but have not seen that kind of sale again. Depending on the kit they included a free boxed set of Dragon figures too.

Would be great to have more armor GBs.

 

 

 

I have gone off Dragon a bit, largely due to high prices for kits which are often many years old, while new companies are bringing out new tools at mush lower prices. For me, Dargon are like Hasegawa a bit, they have gone off the boil and relying on past reputaion. But i will still buy their kits if there is no better option.

The last few armour GB's on here were not taht well supported after loseing a lot of the hardcore armour builders. But it might be worth trying again, just got to find the right subject.

 

I have some Takom, RFV, and  Meng kits with complete interiors that are super detailed and were cheaper than Dragon kits with no interiors. I'm waiting for an armor GB to pop up in the near future to join in.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    July 2014
Posted by modelcrazy on Wednesday, December 29, 2021 10:40 AM

Beautiful builds PJ. There may not be a lot but they are quality!

Yeah, I'd be up for an armor build sometime. I believe Bish is going to start a Gulf War B next year.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, December 29, 2021 12:39 PM

modelcrazy

Beautiful builds PJ. There may not be a lot but they are quality!

Yeah, I'd be up for an armor build sometime. I believe Bish is going to start a Gulf War B next year.

 

Thanks Steve, planning on a few more for 22.

Hey how cool would a cat GB like Tigers, Puma and Panthers?

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Wednesday, December 29, 2021 2:17 PM

Lovely work PJ. The 8 wheeled Rad is fantastic, great job on the vehicle and the figures. I like the idea of a cat build and Secret Santa gave me a tiger, so if it comes to fruition, I'm in.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    May 2020
Posted by Keyserj on Friday, December 31, 2021 12:51 PM

Great collection of builds pj. I especially like the Alclad on the f84.

 

I have a lot of armor currently in the stash. I would be down for an armor GB in 22.

"Why don't you knock it off with them negative waves?"- Oddball

 

John

On the bench:

 

                     

  • Member since
    April 2020
  • From: West Texas
Posted by JBRaider on Friday, December 31, 2021 3:46 PM

a bunch of great builds, I am especially fond of the 109.

  • Member since
    March 2013
Posted by patrick206 on Friday, December 31, 2021 5:17 PM

Man oh man, the PJ model factory turned out some beautious work for the year, all around great work. The '84 has to be my favorite, all others close behind and examples of very skillfull building and finishing. Thanks for the post and photos.

Patrick

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Friday, December 31, 2021 7:07 PM

Hey thanks guys to all the kind comments. Have a safe and happy New Year!

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    February 2005
  • From: Nashotah, WI
Posted by Glamdring on Saturday, January 1, 2022 10:35 AM

Stunning work PJ!  Your Tomcats are a joy to behold.  

Robert 

"I can't get ahead no matter how hard I try, I'm gettin' really good at barely gettin' by"

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, January 5, 2022 9:30 PM

Glamdring

Stunning work PJ!  Your Tomcats are a joy to behold.  

 



Thanks!!

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.