SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Who makes the better P-40B Tomahawk?

3326 views
37 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2014
Who makes the better P-40B Tomahawk?
Posted by BrandonK on Saturday, November 21, 2015 3:33 PM

Revell or Trumpeter?  1/48

I've heard the Trumpeter kit is grossly inaccurate. Any input from those of you who've built them?

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    September 2010
Posted by Chris FFZ on Saturday, November 21, 2015 3:37 PM

BrandonK

Revell or Trumpeter?  1/48

I've heard the Trumpeter kit is grossly inaccurate. Any input from those of you who've built them?

BK

 

The Revell kit is the monogram kit from the early 1960s. the fit is fine and teh shape is correct overall, but it has raised panel lines and basic cockpit details.

Airfix has announced a new P-40b in 1/48 for next year, enlarging its 1/72 offering and that one will probaly be the best, alough i have heard some complaints about the test shots.

American Scale Model Manufacturer's Forum Honcho

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Saturday, November 21, 2015 4:55 PM

Unfortunately they're all horrendous. I'd hold out for the new Airfix. 

 

 

  • Member since
    August 2015
  • From: the redlands Fl
Posted by crown r n7 on Saturday, November 21, 2015 5:32 PM

Hobby craft makes a P-40 in 1/48 thats ok with recessed panel lines. The cockpit is scarce of detail. here are some pics from mine

 

 

 Nick.

  • Member since
    January 2015
  • From: Katy, TX
Posted by Aggieman on Saturday, November 21, 2015 7:16 PM

The Monogram is a good kit that needs some tender loving care to fill out the wheel wells, plug a huge gap under the wings and bring the cockpit detail up to par with more modern releases. I have probably built this thing a dozen times throughout my modeling life.

I built the Trumpeter not too long ago. I encountered some fit issues, but was happy with the OOB cockpit and wheel well detail level. I cannot say her it is accurate to the scale inch but to my eyes  looks like a P-40.

  • Member since
    November 2003
  • From: State of Mississippi. State motto: Virtute et armis (By valor and arms)
Posted by mississippivol on Saturday, November 21, 2015 11:34 PM
I would wait for Airfix, but if you don't mind adding the detail, then Revell (aka Monogram ).
  • Member since
    November 2003
  • From: State of Mississippi. State motto: Virtute et armis (By valor and arms)
Posted by mississippivol on Saturday, November 21, 2015 11:41 PM
Just saw on cybermodeler that marks models released a resin detail set for the issues brought up for the Revell kit. Looks pretty good.
  • Member since
    September 2010
Posted by Chris FFZ on Sunday, November 22, 2015 5:42 AM

crown r n7

Hobby craft makes a P-40 in 1/48 thats ok with recessed panel lines. The cockpit is scarce of detail. here are some pics from mine

 

Very nice, i have built this one also, its actually the old canadain hobbycraft kit.


American Scale Model Manufacturer's Forum Honcho

  • Member since
    June 2014
Posted by BrandonK on Sunday, November 22, 2015 11:05 AM

I am wanting to put together a Pearl Harbor P-40B and I want to doll it up like always. I really dont want to spend the time on the Revell kit yet, I have that one. I want one that I can build up nicely, mostly OOB and have it represent a -B without too much extra effort.

Can a Hasegawa -E be converted to a -B?

Perhaps I'll just build a Trumpeter and wait for the Airfix kit.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Sunday, November 22, 2015 1:35 PM

BrandonK

Can a Hasegawa -E be converted to a -B?

Perhaps I'll just build a Trumpeter and wait for the Airfix kit.

BK

 

holy, you might as well tool a new kit yourself. Where would you get the nose, cowl flaps, wing roots, cockpit, windscreen...??

 

 

  • Member since
    June 2014
Posted by BrandonK on Sunday, November 22, 2015 3:28 PM

Nathan T

 

 
BrandonK

Can a Hasegawa -E be converted to a -B?

Perhaps I'll just build a Trumpeter and wait for the Airfix kit.

BK

 

 

 

holy, you might as well tool a new kit yourself. Where would you get the nose, cowl flaps, wing roots, cockpit, windscreen...??

 

So....that's a no?

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    September 2010
Posted by Chris FFZ on Sunday, November 22, 2015 4:07 PM

BrandonK

I am wanting to put together a Pearl Harbor P-40B and I want to doll it up like always. I really dont want to spend the time on the Revell kit yet, I have that one. I want one that I can build up nicely, mostly OOB and have it represent a -B without too much extra effort.

Can a Hasegawa -E be converted to a -B?

Perhaps I'll just build a Trumpeter and wait for the Airfix kit.

BK

 

It would far easier to use a hobbycraft/academy P-36 and just swap out the nose with the revell/monogram kit. The P-40b is a mohawk with an inline instead of radial engine.

American Scale Model Manufacturer's Forum Honcho

GAF
  • Member since
    June 2012
  • From: Anniston, AL
Posted by GAF on Sunday, November 22, 2015 4:27 PM

Hmmm, I would go with the Revell kit and a True Details cockpit.  Forget about all the other detailing stuff, if you want to build it OOB.  Bvallot did the "detail until it bleeds" on the P-40B

http://cs.finescale.com/fsm/modeling_subjects/f/2/t/162912.aspx?page=1

and did an excellant job.  And the Revell kit is $13 or so.

Or you could build it in Blender.

http://airplanes3d.net/model-p40_e.xml

Witold Jaworski is doing some nice 3d modeling work in the "Scratchbuilding" part of this forum.

Gary

 

  • Member since
    June 2014
Posted by BrandonK on Sunday, November 22, 2015 6:07 PM

A nose kit bash, hmm. That sounds interesting. I think I'll look into that.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    January 2015
Posted by BrandonD on Monday, November 23, 2015 2:04 AM

I have wanted a good P-40B for a long time. I built the Monogram one as a kid, and I'm salivating over the new Airfix ones. Let's all build a squadron when it comes out, haha.

After building the new-tool Hurricane this year, I am SOLD on the new Airfix offerings. Are they perfect? No. But I really enjoyed building it, and it was definitely high value for the dollar.

-BD-

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Monday, November 23, 2015 11:23 AM

Chris FFZ

Airfix has announced a new P-40b in 1/48 for next year, enlarging its 1/72 offering and that one will probaly be the best, alough i have heard some complaints about the test shots.

 

 

Now that is interesting! Been a long time coming I believe.

Eric

 

  • Member since
    March 2010
  • From: MN
Posted by Nathan T on Monday, November 23, 2015 11:29 AM

Hey Jester's not dead...(poor Top Gun ref.). Good to see you back Man!

 

 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Monday, November 23, 2015 11:41 AM

The Monogram kit still holds up pretty well.  Can you add detail?  Sure.  But it's not such a bad kit.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Monday, November 23, 2015 12:17 PM

Nathan T

Hey Jester's not dead...(poor Top Gun ref.). Good to see you back Man!

 

LOL, thanks Nate!

Eric

 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, November 24, 2015 11:47 AM

For those with the Monogram kit, I just saw a post at Modeling Madness that Starfighter Decals is re-issuing the old Medallion Miniatures P-40B/C detail set.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Wednesday, November 25, 2015 8:09 PM

Here's my 2 cents.  I've built them all, some you've seen here recently, to include a spliced a Hobbycraft/Academy kit. The latest incarnation of the 1964 Monogram kit is rough as, the molds are shot (like the P-61)  The Academy/HC kit is very basic and extremely inaccurate.  The Trumpeter kit has a strangely shallow pit with a child's car seat, skinny props, and rivets that are more like bomb craters everywhere.  So far the Trumpeter kit with an aftermarket pit is the lesser of all the above evilness, but far from great. 

Airfix is about make all of this moot anyways.  I'd wait, unless you like torturing yourself. 

Joe

P.S.  Jester.........good to see you back my friend.....what's shakin?

 

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

  • Member since
    October 2013
Posted by ajd3530 on Wednesday, November 25, 2015 8:14 PM

lawdog114

Here's my 2 cents.  I've built them all, some you've seen here recently, to include a spliced a Hobbycraft/Academy kit. The latest incarnation of the 1964 Monogram kit is rough as, the molds are shot (like the P-61)  The Academy/HC kit is very basic and extremely inaccurate.  The Trumpeter kit has a strangely shallow pit with a child's car seat, skinny props, and rivets that are more like bomb craters everywhere.  So far the Trumpeter kit with an aftermarket pit is the lesser of all the above evilness, but far from great. 

Airfix is about make all of this moot anyways.  I'd wait, unless you like torturing yourself. 

Joe

P.S.  Jester.........good to see you back my friend.....what's shakin?

 

 

 

I second this about the Monogram molds. The newest boxing is a few steps above garbage. However, if you can find a white box kit from the 70s or what not, go for it.

  • Member since
    June 2014
Posted by BrandonK on Wednesday, November 25, 2015 9:54 PM

I have a white box in the stash. Since I've heard all this from you guys about all the kits I think I'll add a resin pit to that kit and Doctor up the wheel bays and call it good. Then buy the Airfix as soon as it hits. Until then the Hasegawa -E is soon to see my bench.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    October 2013
Posted by ajd3530 on Wednesday, November 25, 2015 10:07 PM

BrandonK

I have a white box in the stash. Since I've heard all this from you guys about all the kits I think I'll add a resin pit to that kit and Doctor up the wheel bays and call it good. Then buy the Airfix as soon as it hits. Until then the Hasegawa -E is soon to see my bench.

BK

 

 

Now don't get me wrong, the Monogram kit looks real good shape wise. its just over 50+ years, they've put out hundreds of thousands (maybe millions?) of that kit, and it really shows in the newest releases. Box in the wheel bays and slap a resin pit in there, and you'll have a darn good looking Tomahawk with your skills.

  • Member since
    June 2014
Posted by BrandonK on Thursday, November 26, 2015 1:44 PM

Well, I ordered a PE set for interior, mostly for the IP as well as a Legend resin pit, squadon canopy, and Montex mask set. I found two great books on the P-40's that should show me what I need to know for the kits faults that I can correct. I plan to scratch up the wheel bays like BVallot did. I'll give the whole kit some love and see what it can look like in my hands. I've seen others make it look great, I hope I can come close. We'll see.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    September 2011
Posted by fightnjoe on Saturday, November 28, 2015 1:09 PM

Well for what it is worth....

 

For me the Revell kit holds a special place in my heart.  For the B version you will need to work on the pit a bit (What little detail depicts an -E version)  and some other bits and bobs (Gunsight most notibly) but it can be a beauty to build up.  The Trump kit, at least in my mind, needs more intense work to get a decent build.  I have built up a number of the different kits but all in all I find working on the Revell kit to be more satisfying than the others.

 

 

Joe

Veterans,

Thank You For Your Sacrifices,

Never To Be Forgotten

Where you can find me:

Workbench on FaceBook  Google Plus  YouTube

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, December 1, 2015 11:36 AM

I second those of you who warn against buying the new Revell boxings of the old Monogram kits.  I don't buy them, either, and it's not really an issue, because you can get older, earlier moldings so easily and cheaply on the second-hand market.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    June 2013
Posted by bvallot on Tuesday, December 1, 2015 1:55 PM

I've been away from the forum for a while on account of work, and holiday stuff, in-laws staying with us, etc...so I'm just catching up on everything I've missed.

I have to agree with fightnjoe on this one.  That Revell kit still has the best shape and proportions out of everything out there.  Now I imagine it really comes down to where do you feel like putting the work in.  I'm not as prolific a builder as some of you here so it's possible the only two kits I bought came out half decent...or maybe it's just that I'll put up with garbage as I've hopefully not gotten too spoiled yet. =D

I haven't seen anything about the new Airfix kit just yet as I've been so tied up, so I suppose I'll have to jump into that.  Until then, I really think you get the most out of giving the Revell kit some love that it needs.  I really don't fancy myself such a great modeler for the most part.  The painting process is where my experience comes in to help bring my builds more to life.  So far my scratchbuilding is very basic and rudimentary. And I was quite happy to end up with the Hawk I have even with a very basic scratchbuilding skillset.  Just my thoughts. 

=]

On the bench:  

Tamiya F4U-1  Kenneth Walsh

 

  • Member since
    February 2003
  • From: Cameron, Texas
Posted by Texgunner on Wednesday, December 2, 2015 11:16 AM


"All you mugs need to get busy building, and post pics!"

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Wednesday, December 2, 2015 11:42 AM

Texgunner

Proof positive!  That's a sweet build, Tex, nicely done.

The bigger the government, the smaller the citizen.

 

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.