SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/48 Testors U-2C as Rudolf Anderson's U-2F

1387 views
9 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Northern California
1/48 Testors U-2C as Rudolf Anderson's U-2F
Posted by jeaton01 on Monday, November 4, 2024 11:54 PM

I'm doing this one and an RF-86F for the museum where Solano Scale Modelers meets once per month.  Here's that club's website:

 https://goldeneramodel.com/SCSM1/SCSM1.html

I recently started managing the web site and we be adding more current affairs type club content to it as time goes on.

I will be doing this model as Major Rudolf Anderson's U-2F.  Major Anderson lost his life when shot down over Cuba, an incident that is thought to have been a big factor in things not getting worse during that crisis.  Caracal Decals did a sheet that has the correct markings.  The U-2C kit has the long upper fuselage fairing which had to be shortened.  After cutting the necessary area a plastic card backing was made for the area and then Aves Epoxysculpt was used to bring things back to the proper shape.  The cockpit will be just the pilot, seat, and instrument panel as it will be an inflight display, and with the addition of a bulkhead blocking off the rear of the cockpit.  The same process was used to fill in the landing gear bays and a recess for a duct on the bottom was also filled and faired.  The model has been rescribed using a JLC saw and a fine Tamiya scribing tool.  A tailpipe was made from 9/16 K&S brass tube.















John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, November 5, 2024 6:16 PM

Hello John!

Looks like an interesting project - I'll be watching with interest! Good luck with your build and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Wednesday, November 6, 2024 11:29 PM

Hi, Pawel, thanks for looking in!

I have added a fairing to the tail cone that seems to be fitted to the CIA U-C's, made from a slice of brass tubing attached with superglue followed by epoxysculpt filler. The engine air inlet ducts have been added, with green zinc chromate sprayed in the interiors before the front of the duct was added. More Epoxysculpt and filing and sanding here as well.

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Thursday, November 7, 2024 5:59 PM

Amazing so far.  Anything with tha much filling and scribing, yet looking so good, always amazes me.

We few who come to visit FSM, must needs make our voices heard, and keep the doors open, as it were.

  • Member since
    September 2012
Posted by GMorrison on Thursday, November 7, 2024 5:59 PM

I occasionally meet someone down here for two years at the Naval Post Graduate School who flies these things. 

"I could tell you everything there is about North Korea but then I'd have to kill you".

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    September 2012
Posted by GMorrison on Thursday, November 7, 2024 6:35 PM

I don't think it's possible to visit Beale AFB but that would be interesting.

My good friend Airman Jim was taking a shortcut across the base at Barksdale AFB one night with another guy.

They rounded a corner and walked into a hangar, where there was a U-2 being serviced. Not a regular at Barksdale.

Several days later his mother got a letter. "Airman incarcerated".

She thought it said "Airman incinerated".

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Friday, November 8, 2024 5:17 PM

Thanks, CapnMac, glad you are aboard.

Bill, a funny one about the misread, but I'm sure it wasn't at the time.  There were open houses at Beale and people got up close during those.  There was a gravel pit right at the end of the runway where we bought specialized fill gravel for our well drilling and there was lots of good viewing from there.  I did encounter U-2's when I was flying around there and that was always fun.  Not very often would you see the SR-71's, mostly when they were doing touch and goes.  Actually the most spectacular was one day some hot dog was doing touch and goes in a black T-38.  He would bank so steep in his crosswind departure turn you could see his shoes.

Here's a couple of pictures from 1989 in my film camera days at Rancho Murita airport, where our company sponsored an airshow for a number of years.  I have a better one of the SR-71 somewhere where it is streaming fuel off of its tail.

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Tuesday, November 12, 2024 5:52 PM

Excellent project, John!  I enjoy seeing your work, and this is an interesting upgrade to this classic.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Wednesday, November 13, 2024 4:39 PM

Thanks, Baron!

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Monday, November 25, 2024 5:29 PM

The U-2 is progressing, if slowly. The markings here have all been painted, only the stars and bars and the small decals around the cockpit, and a few stencils will be used. Annoyingly the right stabilizer has decided to take a short holiday, looks like some drilling and pinning is in my future.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.