SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

PACIFIC CARRIER AVIATION GROUP BUILD

90280 views
1294 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Tuesday, April 28, 2015 8:15 PM

Great to see some pics lewbud. You've done a terrific job on it so far. I would hope that you would still build it as VF-51 if that is what you really wanted to do. Please do not let the fact that we are using the same decal sheet deter you from building what you honestly want to. It's your build, build it as you want to. I certainly do not have any single issue with that.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Wednesday, May 20, 2015 5:05 AM

Where's the progress in here..................? I was sure a lookin' forward to some purdy blue planes that were being worked on.Stick out tongue

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Wednesday, May 20, 2015 7:21 AM

I totally agree with Mustang.   Let's see the purdy blue planes.....

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Wednesday, May 20, 2015 7:48 AM

Easy there my eager little friends. I am currently putting on the finishing touch ups here and there. I then only need to glue on the sliding canopy and prop. The antenna wire has given me some hassles, but I've got it on. It is actually unsatisfactory, but at this point it will have to do because I'm about ready to move on. I will in the near future redo it. I have simply spent far too much time on this little Hellcat. I hope to finish up today and get pics to you all very soon. Thanks for the kindly push though.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Thursday, May 21, 2015 7:05 PM

You can do it, Joe!  You've triumphed over worse!  Yes

 

 

 

 

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Thursday, May 21, 2015 7:08 PM

Hey Joe! I thought we were gonna get some pictures today.................Confused

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Friday, May 22, 2015 12:02 AM

Thank you Checkmate. Kind words indeed.

Joe, I'm afraid you'll have to wait a bit longer. I've finished it up and took some pics. It's just that it is now late and I'm ready to auger in for the eve. Maybe I'll get them posted in the morning before I head to work.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, May 22, 2015 4:32 AM

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Friday, May 22, 2015 7:21 AM

The 1/72 Eduard Hellcat is done! FINALLY!!!!!!

It definitely took some patience, perseverance and creativity to get past the mishaps, but in the end I feel that I recovered quite well.

Thank You Clemens for putting on such an excellent group build. And Thanks to each one of you for for continually providing me with the enthusiasm and confidence to stick with it and work through the issues.

Overall the Eduard Hellcat is simply one sweet kit. The detail and engineering are absolutely to notch. The only real issue I have with the kit is that the open canopy sits a bit too high. I'm not real happy with my antenna. The EZ line is bit big for scale and my CA glue work turned out a bit messy. I'll likely redo that in the future

So, enough babbling, let's have a look at some pics shall we.

And now for some pics with a little added touch:

Thanks again guys. And i hope you have enjoyed my lesson on "Don't give Up".

Cheers to you all and happy modeling.

   Joe

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    May 2013
  • From: From the Mit, but live in Mason, O high ho
Posted by hogfanfs on Friday, May 22, 2015 7:44 AM

Joe,

If you didn't tell anyone, no one would ever know you had any issues building this Hellcat. It looks fantastic! Great job, and even greater perseverance on your part!  

 Bruce

 

 On the bench:  1/48 Eduard MiG-21MF

                        1/35 Takom Merkava Mk.I

 

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, May 22, 2015 8:00 AM

Wooooow!!! Man the weathering and paint AND detail all rolled into a nice lil' 72nd scale package. Spectacular build Joe. Man you should really treat this thing to a nice display area!!! You should really be proud of this future trophy winner bud! YesYesYesYesYes

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Friday, May 22, 2015 10:01 AM

It looks gorgeous, Joe.  Your patience, and perseverance, really paid off.  I love the weathering around the guns, and all the chipping.  The paint, decals, and joins, all look tight.  Well done sir!  Like other have said, you should feel really good about this build.  Fantastic work....

Thanks for hanging in there on this.  It's been great watching your build progress, and seeing your dogged determination!!!  YesYesYesYesYes  Very impressive sir!

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Friday, May 22, 2015 10:31 AM

Your patience paid off, Joe. Really nice looking hellcat. Surely like the subtle weather streaking on the wings.

Thumbs up indeed.

  • Member since
    February 2014
  • From: Michigan
Posted by silentbob33 on Friday, May 22, 2015 5:01 PM

Joe your Hellcat looks fantastic! It was well worth the wait see how wonderfully it turned out. I know I said it before, but I just can't believe that's 1/72. Congrats on a great build.

On my bench: Academy 1/35 UH-60L Black Hawk

  • Member since
    September 2003
  • From: AandF in the Badger State
Posted by checkmateking02 on Friday, May 22, 2015 5:02 PM

Well worth the effort, Joe.  You've achieved great results!  It's a very appealing plane.

 

 

 

 

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Friday, May 22, 2015 9:32 PM

Gentlemen, I am very grateful for the rather glowing accolades. It is indeed immensely rewarding to make such an impression upon ones piers. As such, for me, this Hellcat wasn't so much the finished product , but rather that I finished at all. Under normal circumstances I'd have probably set this aside to remain unfinished. Yet, it was your encouragement that provided me with the impetus to carry it through. Finishing this kit, more specifically this Hellcat, was doubly important as it is the first model I have built of one of the aircraft my father flew. And now there are a few more to go. It's a hell of a start. Thank You again.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    June 2008
Posted by lewbud on Saturday, May 23, 2015 9:41 PM

Joe, beautiful work on your Hellcat.  I wonder how many times she flew escort for then Lt.(jg) Bush?  I'm still working on mine, basically waiting for the heavens to close for a while.  We had lakes in the DFW area that were less than 25% capacity that are now full, most lakes are shut down for the weekend because they are 10 or more feet above flood stage and no one can get to them.  The parking lots have standing water 2-3 feet deep and it's raining heavily as I type this.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Saturday, May 23, 2015 10:17 PM

Hey lewbud, Thank You very much for the kind compliment. I am anxiously waiting to have a look at your finished product. You'll nail it, I know. Where exactly do you live? Sounds like some epic rain there. We've been having an unusually wet spring here in Utah, but it's no where near enough to make up for the unfortunately dry winter. Thus we're into the 15th year of drought conditions.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    June 2008
Posted by lewbud on Monday, May 25, 2015 1:57 PM

Joe, I live in Arlington, TX, which is between Dallas and Fort Worth.  We've had a lot of rain, and more is coming.  It's not as bad here as it is in South and Central Texas, where over the weekend some areas got over 10 inches of rain in 24 hours.  I gave up waiting and shot some gloss coat last night.  My version of Little Joe has the port side decalled.  Now to watch an episode of Band of Brothers, then the starboard side.  The fuselage should be done this evening.  Pics will have to wait until I can get to a computer.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Thursday, May 28, 2015 10:16 PM

Well, it's good to hear that you're staying relatively dry. Not sure how your 1/48 scale decals are for "Little Joe" , but studying the one photo of that F6F it appears to me that there are few if any stencils. Thus, that is how I decaled mine. I loved it as it made for a quick and easy decal session.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Thursday, May 28, 2015 10:21 PM

Whoops, sorry lewbud. I forgot that you had mentioned that you were going to decal yours as VF-1 from Yorktown. Is that still what you are doing?

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, May 29, 2015 5:27 AM

lewbud
I live in Arlington, TX, which is between Dallas and Fort Worth.

Going to the IPMS show in Austin on the 10th of October??

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    June 2008
Posted by lewbud on Friday, May 29, 2015 11:59 PM

Joe,

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    June 2008
Posted by lewbud on Saturday, May 30, 2015 12:20 AM

Joe, since you had no problem with it, I stuck with my original plan to do Little Joe, only in 1/72.

Mustang, it's possible.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Saturday, May 30, 2015 5:56 AM

lewbud
Joe, since you had no problem with it, I stuck with my original plan to do Little Joe, only in 1/72

Very Cool!! I am highly anticipating seeing it done.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    December 2012
Posted by flyerduke on Sunday, May 31, 2015 8:10 AM

Hey Joe.  I'm a little late to the "your Hellcat looks fantastic" party.  You really did an amazing job on the kit.  Eduard kits a fun to build.  Lookin' forward to the next GB with you.

Craig

  • Member since
    April 2013
Posted by SchattenSpartan on Tuesday, June 30, 2015 5:49 PM

Hey everyone!

I'm terribly sorry for my long absence. I had not time for anything the last couple of months...

Things got better around here though, so I should have some spare time for this hobby again.

Give me a day or two and I'll catch up on this GB and update the front page.

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Tuesday, June 30, 2015 6:10 PM

What a grand day to have your presence back around Clemens. You were greatly missed but, by gum, we certainly didn't forget about you. It is indeed good to see your return to the realm of styrene.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, June 30, 2015 9:12 PM

Good to see you back in town Clemens!!Yes

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Tuesday, June 30, 2015 10:25 PM

Great to see you back, mate. Welcome Signback

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.