SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Japanese Group Build VII

27885 views
664 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2010
  • From: Tempe AZ
Posted by docidle on Saturday, February 3, 2018 9:53 PM

plasticjunkie

Jack

Sorry to hear about the lifting. What paint did you use? Anyway, it looks very good from here.

 Back to work on lady Kate. She got some Flory dark grime wash over Future and when dry was wiped off leaving traces of the wash in the recessed areas. A coat of MM flat clear acrylic was sprayed and when dry did a dot weathering job starting on the wings.

Using a wide brush with a tiny bit of thinner the oil paint is streaked and blended. Most is removed leaving subtle streaks and fading.

The effect is noticeable to the human eye more than the camera can capture. The rest of the plane will get the dot technique along with minor chipping here and there.

The vac formed canopy was a bit of a challenge to mask having VERY faint frame lines. I had to mask the horizontal sections and paint by hand the frames.

tape removed

and finally all the frames done, some done freehand.

More to come...

 

 

 

PJ, 

Your Kate is looking fantasti! Can I ask what colors you use for your oil dot wash? Looking forward to seeing the finished model.

Steve

       

 

 

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Saturday, February 3, 2018 10:34 PM

Thanks Steve. Miss Kate got some white, green, ochre and burnt umber oil colors. The white helps in fading the paint ina very subtle way.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    January 2017
  • From: Colorado Springs
Posted by mawright20 on Sunday, February 4, 2018 4:50 AM
I have this kit in my stash, don't know when I'll get to it. Will watch this build....
  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Sunday, February 4, 2018 5:17 AM

Sorry Japanese GB members, I’ve been tending to Mrs. Toshi and watching my grandson so I’ve been away for a while.  I have Saturday and Super Bowl Sunday without my grandson so here’s where I left off.  

 

Cockpit almost completed.

 

Completed cockpit, I will be cleaning it up a bit and working on the fueselage.  Next up?  Engine assembly.

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    December 2003
  • From: 37deg 40.13' N 95deg 29.10'W
Posted by scottrc on Sunday, February 4, 2018 8:21 AM

Thank you Jack for the compliment.

Steve, yup, you really need to try this kit, it has been a lot of fun.  It would be great to see what you could do with it.  There are a number of pictures of this ship operating in the rough Northern Pacific rolling like a barrel and then at anchor in a habor, so the water effect subjects are endess.

PJ, again, your detailed documentation of this Kate build is really informative.  The paint work to bring out the details is spot on.

Toshi, welcome back my friend.  I am following your build with interest and support.  You have come a long way with your skill and technique.

Scott

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Sunday, February 4, 2018 4:15 PM

Well I've started my little T-34. And I do mean little  wow this thing is tiny

 

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Sunday, February 4, 2018 5:07 PM

Toshi

Anthony's pit is looking very good.

Jack

Thank you Sir.

TJ

Wow that is tiny! Can't wait to see how this comes together.

Small update on Kate. Got her prop painted and striped.

Finally got that long telephone pole strapped to the bottom! I also made the small glass window using clear parts cement.

Another view

Added some wear on the heavy foot traffic areas

The greenhouse is next and she's about done.

 

 

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, February 4, 2018 5:24 PM

Scott: Beautiful job there! Love the base, I wouldn't change a thing. I grabbed the photo with the 3/4ths down view to show the deck and planes. Let me know if you'd like me to change it.

Shacknasty Jim: You're welcome! I just put you down.

 

I'm a little afraid I'll leave someone out so I'll say great job all around guys!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, February 4, 2018 6:12 PM

Wonderful work on the Akagi, Scott.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    December 2017
Posted by Shacknasty Jim on Sunday, February 4, 2018 9:45 PM

Okay, here we go...

only done a few kits thus far, so this might not be up to the level of awesomeness you are all used to. Also, I paint with brushes! 

 

Here is is the cockpit:

The engine wasn’t super detailed, and I havent gotten into adding scratch built pieces as of yet: 

After a bit of filler and sanding (maybe not enough sanding) I primed with black in preparation for a coat of aluminum: 

 

I have decided the KI-100 is a pretty good looking aircraft. Hopefully I can do it justice. 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, February 5, 2018 4:10 AM

scottrc

Thank you Jack for the compliment.

Steve, yup, you really need to try this kit, it has been a lot of fun.  It would be great to see what you could do with it.  There are a number of pictures of this ship operating in the rough Northern Pacific rolling like a barrel and then at anchor in a habor, so the water effect subjects are endess.

PJ, again, your detailed documentation of this Kate build is really informative.  The paint work to bring out the details is spot on.

Toshi, welcome back my friend.  I am following your build with interest and support.  You have come a long way with your skill and technique.

Scott

 

Thank you it’s really good to be back!  Your words are too kind, in Japan there is a saying in that; “The student is only good as the teacher”.  And you and all of FSM Forum members have been exceptional teachers to me and I thank you and forum members for this.

Your student, Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, February 5, 2018 4:17 AM

I had the weekend without my grandson so I took advantage of Super Bowl weekend to get some bench time on my Tamiya 1/48 Hien (Tony).  The following compilation is what was done this past weekend.

 

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, February 5, 2018 4:19 AM

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, February 5, 2018 10:01 AM

Jim & Toshi: Great work guys on your two 'Tonys'. Awesome to see the inline engine Ki-61 and the radial engine Ki-100 coming together as a pair. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, February 5, 2018 10:40 AM

Gamera

Jim & Toshi: Great work guys on your two 'Tonys'. Awesome to see the inline engine Ki-61 and the radial engine Ki-100 coming together as a pair. 

 

Thank you Gamera.

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, February 5, 2018 10:41 AM

Here is a little more work this morning.

 

 

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Monday, February 5, 2018 11:55 AM

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    July 2014
Posted by modelcrazy on Monday, February 5, 2018 5:18 PM

Looking good Toshi, can you make the pictures bigger?

I started the Nell.

The kit’s interior is typical of Hasegawa’s other 1/72 offerings. There isn’t a lot of detail and because of the large greenhouses, it would benefit from some AM or scratchbuilt enhancements. I going to build OOB but will add some interest such as belts and plumbing. The instructions take some time to figure out, such as the option to show the build with or without the gun in the turret and why one should remove the tabs on the bulkheads because of it. However, after some study it becomes clear. What isn’t clear is where to place part E8 on the left fuselage wall. There doesn’t seem to be any guide of any kind. I went with my best guess as don't think it's really going to matter once it's closed up.

The kit looks to build up quickly once the interior is complete.

Next update soon.

Steve

 

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    March 2015
  • From: Streetsboro, Ohio
Posted by Toshi on Tuesday, February 6, 2018 2:21 AM

modelcrazy

Looking good Toshi, can you make the pictures bigger?

I started the Nell.

The kit’s interior is typical of Hasegawa’s other 1/72 offerings. There isn’t a lot of detail and because of the large greenhouses, it would benefit from some AM or scratchbuilt enhancements. I going to build OOB but will add some interest such as belts and plumbing. The instructions take some time to figure out, such as the option to show the build with or without the gun in the turret and why one should remove the tabs on the bulkheads because of it. However, after some study it becomes clear. What isn’t clear is where to place part E8 on the left fuselage wall. There doesn’t seem to be any guide of any kind. I went with my best guess as don't think it's really going to matter once it's closed up.

The kit looks to build up quickly once the interior is complete.

Next update soon.

Steve

 

 

Thank you sir.  I tried to but can’t, I’m running off an iOS system and all I can get is thumbnails.  But if you click each photo, you get a larger image.

Your friend, Toshi

On The Bench: Revell 1/48 B-25 Mitchell

 

Married to the most caring, loving, understanding, and beautiful wife in the world.  Mrs. Toshi

 

 

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, February 6, 2018 7:20 AM

Toshi: Cool, that transparent side is going to look really neat with all the cockpit detail showing. 

Steve: I know what you mean about them being a bit on the Spartan side. Looks great so far. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, February 6, 2018 8:14 AM

Toshi
 But if you click each photo, you get a larger image.

Yeah, here's the thing. I click on the picture, then 3/4 of the page is filled with women wanting to "pamper" me. If my wife were to see that, I would have a hard time explaining that I was looking at "larger" pictures of scale models. She tends to be slightly on the jelious side. But of all the women I have ever known, she is the only one who would stick with me though this time in my life ,so I'll stick with the thumbnails.

Steve

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Tuesday, February 6, 2018 8:37 AM

Fuselage buttoned up. Did I mention this thing is tiny. Stick out tongue

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, February 6, 2018 11:48 AM

modelcrazy

 Yeah, here's the thing. I click on the picture, then 3/4 of the page is filled with women wanting to "pamper" me. If my wife were to see that, I would have a hard time explaining that I was looking at "larger" pictures of scale models. She tends to be slightly on the jelious side. But of all the women I have ever known, she is the only one who would stick with me though this time in my life ,so I'll stick with the thumbnails.

Steve

 

 
I have Adblock Plus installed and it blocks all the other images, Steve.  It works with Firefox, I don't know about other browsers.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, February 6, 2018 12:58 PM

Thanks Jeaton, I installed it but still get the adds. That's OK, it will probably help with other advertising. If I'm fast enough to click on the picture I won't get the adds before they load LOL.

Thank you.

Steve

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, February 7, 2018 7:50 AM

TJ: Wow, you weren't kidding when you said she was small. Looks good so far. 

Steve: So I'm not the only one who gets the 'Hot Filipino women looking for love' and 'Russian brides' ads when I click on Toshi's photo links? Crying

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2014
Posted by modelcrazy on Wednesday, February 7, 2018 3:23 PM

Main mast completed.

Steve

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Wednesday, February 7, 2018 4:57 PM
That is just amazing MC, It looks so complicated. Cheers Tony

I'm just taking it one GB at a time.

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, February 7, 2018 5:13 PM

Steve (mc)

apologies for missing your earlier comment on my Kate, I just saw it. 

I don't want to leave anyone out so with that, incredible work going on guys!

Steve buddy you hit that ball out of here with that pe work. My goodness that looks awesome 

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    July 2014
Posted by modelcrazy on Wednesday, February 7, 2018 5:24 PM

Thanks Tony and PJ. I know about missing posts. I get notifications on my phone, open the email on it and seem to miss a post or two on occasion. I don't notice until I open the forum and scroll back.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, February 7, 2018 10:07 PM

My Kate is finished. I did more research on this particular Kate and she had quite a career on the Shokaku. She took part in the second wave that attacked Kaneohe NAS on Dec. 7th, 1941. She also fought at the Battle of the Coral Sea and on Oct.26, 1942, she torpedoed the USS Hornet off Santa Cruz Island. Right after her torpedo run on the Hornet she was shot down by one of the CAP fighters ending her career.

Gamera you get to pick the picture for the completed page. Thanks for hosting and letting me part take.

 

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.