SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Weekend GB 2019-See you in November!

15160 views
252 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2008
Posted by lewbud on Saturday, February 29, 2020 4:30 PM

Nope. Don't have a computer or the skills to do one. If you'd like to do a Calvin and Hobbes themed one, go for it.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    February 2016
  • From: Ice coated north 40 saskatchewan
Posted by German Armour on Friday, February 28, 2020 12:28 PM

Hey lewbud, do you have a group build badge for the GB?

 Never give up, never quit, never stop modelling.Idea

 

  • Member since
    June 2008
Posted by lewbud on Wednesday, February 5, 2020 4:37 PM

Thanks Mach!

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    June 2019
Posted by Mach1 on Wednesday, February 5, 2020 2:19 PM

Nice finish on the Mustang, lewbud.

  • Member since
    June 2008
Posted by lewbud on Wednesday, February 5, 2020 12:08 AM

Gentlemen,

The front page is updated. Thank you all once again.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    June 2008
Posted by lewbud on Wednesday, February 5, 2020 12:01 AM

Caveman,

No worries. Get stronger and we'll see you in few months.

I managed to end this year's build on a successful note. As I said in an earlier post, I started at 2343 Sunday.

I've finished this kit at least 6 times, so my biggest problem isn't running out of time, it's maintaining focus over the 48 hours. I did encounter a problem or two along the way. The most disconcerting was the fact that I couldn't get my airbrush to work. It's a Badger 250 mini spray gun and while I had no problem with airflow, I couldn't get it to spay, not even water. To be honest, it is pretty ancient and it's possible that even after I ran something through the paint nozzle to clear it, I still couldn't get it to spray. When I get home, I'll throw the nozzle in the purple lake for a couple of days and see if that works.  Since the airbrush wasn't working, I grabbed a can of Tamiya Semi-gloss black (more like a matte black) and painted the cockpit. I glued the cockpit in place and sealed the fuselage. After the wings were attached and everything puttied up, I realized I had left the radiator off. It can't be seen, so I didn't beat myself up about it too much.  Here she is, ready for primer.

I knew I was going to lose a few hours because I had to leave for work at 2000. Here she is in her finished glory with about 25 minutes to spare. The paint is Tamiya AS-12 Bare Metal over their gloss black. The decals are by Carpena and represent a P-51 in Ethiopian service from 1955-1960.

 

Gentlemen,

Thank you all for participating. It doesn't matter if you were successful or not, without you guys, this little build would have be a lonely, short lived endeavor. If you started something but didn't finish it, keep at it and post a pic here when you're done. Until next year!Toast

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    March 2008
Posted by Caveman on Tuesday, February 4, 2020 11:17 PM

Great builds guys.

Sorry Lew, spirit was willing but body was weak.  New meds are still beating me up.  I'll put the kits away for next year.

See you all in November!

  • Member since
    June 2008
Posted by lewbud on Tuesday, February 4, 2020 1:05 PM

GA,

Got it!

GMorrison,

Keep at it! Looking forward to seeing your build!

CBaltrin,

We'll be back around Thanksgiving.  See you then.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Tuesday, February 4, 2020 9:04 AM

Real nice builds here guys.

I guess u can take my name off the roster. Looks like I won't be able to participate this time around. thanks

On the Bench: Too Much

  • Member since
    February 2016
  • From: Ice coated north 40 saskatchewan
Posted by German Armour on Monday, February 3, 2020 11:39 PM

Hi Lew bud! Maybe the bottom picture?

 Never give up, never quit, never stop modelling.Idea

 

  • Member since
    September 2012
Posted by GMorrison on Monday, February 3, 2020 9:21 PM

Still working on the Crusader!

 Modeling is an excuse to buy books.

 

  • Member since
    June 2008
Posted by lewbud on Monday, February 3, 2020 8:32 PM

Well done sir! Well done.  Which pic would you like for the front page?

I started my Mustang at 2300 last night, about 20 hours in, I have something that looks like an airplane.  Has to be finished by 2000 tomorrow as that is when I leave for work.  One of the problems with the Tamiya Mustang is that it goes together so quickly, you can overestimate how much time you have to build it.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    February 2016
  • From: Ice coated north 40 saskatchewan
Posted by German Armour on Sunday, February 2, 2020 8:36 PM

Helo sir! It is finished.

I didn't do the build the kit in 48 hrs.

More like 12 hrs. Wink

Finished building the kit.

Then paint.

 

 

 Never give up, never quit, never stop modelling.Idea

 

  • Member since
    June 2008
Posted by lewbud on Sunday, February 2, 2020 4:18 PM

Got the front page updated (finally Whistling) with Bob's and Freem's builds.  Will start my final attempt this evening with either a 1/72 Tamiya P-51D (will have to find a simple paint job) or Hasegawa's 1/72 X-29 in a what if scheme. How's your build coming GA?

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    June 2008
Posted by lewbud on Saturday, February 1, 2020 12:08 PM

German Armour

I will begin build my batcycle tomorrow.

 

Cool! Can't wait to see it!

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    February 2016
  • From: Ice coated north 40 saskatchewan
Posted by German Armour on Friday, January 31, 2020 7:47 PM

I will begin build my batcycle tomorrow.

 Never give up, never quit, never stop modelling.Idea

 

  • Member since
    September 2005
  • From: Central Nebraska
Posted by freem on Friday, January 31, 2020 3:49 PM

Lewbud---how about the last one (bottom pic). 

Also-thanks for hosting!  Had a blast!  My wife even kept the pressure on me to finish it!

Chris Christenson

 

  • Member since
    June 2008
Posted by lewbud on Friday, January 31, 2020 3:31 PM

Last gasp guys! Anyone building this weekend?

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    June 2008
Posted by lewbud on Tuesday, January 28, 2020 9:09 AM

Well done Chris! Do you have pic you'd prefer for the front page of is it my choice?  Just a reminder gents that this little build of ours will be closing on Sunday 2 Feb. As long as your build is started before 2359 2 Feb, you're golden. As always special requests will be entertained.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    November 2003
  • From: Nashville, TN area
Posted by bobbaily on Monday, January 27, 2020 6:46 PM

Lewbud-please use this pic-I can take more/others if you'd prefer

Bob

 

  • Member since
    November 2003
  • From: Nashville, TN area
Posted by bobbaily on Sunday, January 26, 2020 7:08 PM

Congrats Chris-nice job-looks like a fun build-will have to check out the Smer lineup for next year.

Bob

 

  • Member since
    September 2005
  • From: Central Nebraska
Posted by freem on Sunday, January 26, 2020 6:55 PM

Made it!!!!!!

Smer 1/50 Avia BH-11.  Not a bad kit at all.  Some simple stuff in the cockpit and you'd have a real winner.  Scales out with some museum photos I found on the web.  Reckon I put about 6 hours off and on since Friday night.

Chris Christenson

 

  • Member since
    November 2003
  • From: Nashville, TN area
Posted by bobbaily on Sunday, January 26, 2020 6:00 PM

Thank you sir-I'll take some pics tomorrow after work.

Bob

 

  • Member since
    June 2008
Posted by lewbud on Sunday, January 26, 2020 5:40 PM

Well done Bob!  Take some pics for the front page.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    November 2003
  • From: Nashville, TN area
Posted by bobbaily on Sunday, January 26, 2020 5:37 PM

Made it-kinda-a lot of little things I want to cleanup, add dull coat & oil wash but overall happy.

Lewbud-as always, thank you for organizing this GB-always fun to watch & participate.

Cheers

Bob

 

  • Member since
    November 2003
  • From: Nashville, TN area
Posted by bobbaily on Sunday, January 26, 2020 1:41 PM

Looking good freem-getting close

Sprayed the Future @0600 this am-started decalling @ noon-decals are thick and wrinkled quite a bit-using minimal decals, i.e., no stencils, in order to keep from getting frustrated.

Needed to make some night figher exhaust suppressors but I'll save that for later.

Taking a breather before diving back in-need to install p.e. harness and all the small bits...should make the deadline.

 

Bob

 

  • Member since
    June 2008
Posted by lewbud on Sunday, January 26, 2020 11:10 AM

Looking good guys! Keep it up!

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    September 2012
Posted by GMorrison on Saturday, January 25, 2020 11:46 PM

Roger CAG!  Gull gray all day!

 Modeling is an excuse to buy books.

 

  • Member since
    September 2005
  • From: Central Nebraska
Posted by freem on Saturday, January 25, 2020 11:02 PM

Painted!

  

All that's left is to paint the gear (that was my handle to paint the top), hang the engine and prop, a few decals and 3 small detail parts and she's done.

Chris Christenson

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.