SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Military trainer aircraft Group build 2020

9962 views
197 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Saturday, May 23, 2020 6:42 AM

keavdog

  Here I thought I was the only guy left with the SNJ powder

 

Nope. I've got one bottle left

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Friday, May 22, 2020 11:19 PM

I'm pleased to hear it's going well, it looks good so far too.  Definitely on my list to do.  I only rode in a T-34 once and flew it a little, but l flew almost all of it's civilian brothers and sisters.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Friday, May 22, 2020 7:17 PM

Looking like an airplane.  Kit is going together well, better than average Minicraft kit.

Thanks,

John

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Thursday, May 21, 2020 10:03 PM

Little work on the Mentor.  Pit done (may look at it tomorrow) but mostly done

Next up - closing the fuselage.

Thanks,

John

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Wednesday, May 20, 2020 10:15 PM

mach71

Nice, fast work!

What photo do you want up?

Good to know about the Gunze yellow, I need to paint some yellow on a moon buggie.

Thanks!  How about this picture for the front page:

http://goldeneramodel.com/mymodels/t6/1t6/0251t6.jpg

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Wednesday, May 20, 2020 6:49 PM

keavdog, I'm not sure about the Navy but the Airforce would be grey.

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Wednesday, May 20, 2020 6:47 PM

Nice, fast work!

 

What photo do you want up?

 

Good to know about the Gunze yellow, I need to paint some yellow on a moon buggie.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Tuesday, May 19, 2020 10:31 PM

Thanks for the tips John - I'll look for those paints.

Starting the Mentor.  I'm doing the yellow navy 130 BUNO 140706 built in 1955.  The instructions call for interior green OR flat medium gray for the interior.  Wondering what would be period correct.

 

 

Thanks,

John

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, May 17, 2020 5:38 PM

I wish I had bought more SNJ powder, John, but the one bottle seems to last.  As to the Yellow, go to Gunze paints, their yellow has amazing coverage, gloss, and dries fast.  The number is 329, they call it Blue Angels Yellow.  The red is Model Master Italian Red and it has nice coverage too.  I did spray a light coat of Model Master Flat White in the yellow areas for a base. 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Sunday, May 17, 2020 4:44 PM

Nice masking there.  I can never get silver, red and yellow to play nice.  Here I thought I was the only guy left with the SNJ powder

Thanks,

John

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, May 17, 2020 3:15 PM

The SNJ is all together.  I found it is not necessary to glue the cowl to the engine, since the prop is removable the cowl can be posed on or off.  The engine molding is just soft enough to make it difficult to paint but it doesn't look too bad.  I made a new pitot tube from music wire, with a shark fin soldered on from a scrap of PE.  Unbelievably I never broke off the wing machine gun.  Star, US NAVY, and tail buno and type marking decals were drawn up and printed on an ALPS printer.  The antenna wire is the Fine grade from Uschi, I used Super Fine on a G4M Betty I built earlier and it is almost impossible to see even in an enlarged photo.  The kit landing light covers wouldn't fit over the landing light detail in the wing so new clear covers were made from thin acetate.  The first photos revealed a few touchups to do as usual so that was done. 

I used Alclad II polished aluminum for the nmf areas to begin with, and I am not that happy with it, it seems more fragile than the ALC 101 aluminum in that line.  After all the painting was done, I masked off all the colored areas and rubbed in SNJ aluminum powder and overcoated that with ALC 101.

 

 

 

 

With the Revell PT-13 and Planet PT-19.  The Navy didn't use the Fairchild, the Stearman was an N2S to the Navy.

 

With the Tamiya F4U-1 and Hasegawa F6F3.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Friday, May 15, 2020 8:36 PM

More progress on the SNJ.  Paint. paint, and more paint.  Lots of masking.

 

 

 

 

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Wednesday, May 13, 2020 12:17 AM

Thanks, John, and yeah, that's not gonna be fun.  I have the Reno Racer set which I think is red.  Also one by Necomisa (Monogram mold) from the Miller aerobatic team molded in an almost transparent white, and a Revell Germany T-6G kit which is in yellow.  But what's good about that one is they added to the clear sprue to provide the G windows that don't have the knockout bars in them.  That's the only kit I've seen of these molds or the Modelcraft ones that have that option.

Edit:

I checked one of my Modelcraft kits, the one that comes with the Goldilocks decals.  It has both styles of sliding canopies.  It's a Harvard IV.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Tuesday, May 12, 2020 7:18 PM

Looks really good John.  I couldn't find the standard T-6 monogram kit so I ended up with the Miss Behavin Reno Racer version which is molded in red... that will present a few problems.  I figure I'll go through some primer 

Thanks,

John

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Tuesday, May 12, 2020 6:58 PM

Fast work!

And nice work also. Great modifications.

 

I added it to the front page.

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, May 12, 2020 6:02 PM

I went ahead and started the Monogram SNJ.  The kit of course is not new and some of the detail is not as sharp as the latest kits, but it fits pretty well.  There has been no filler used so far.  I removed the tail wheel, it was eay to saw into the fuselage half it was molded to which left a good shaft to slip in the resulting hole in the fuselage.  The cockpit is a pretty tight fit in the fuselage and next time I will remove some material from the cockpit upper sill to get things to fit with less pressure.  I made some decals for the instruments and added Eduard seat belts. It was easy to pose the elevators in the down postion dut to the elevator being part of the upper half but not the lower, not much plastic to cut through with the JLC saw.  I have also already made masks for the canopy sections and applied them, but I'll probably also use some sections from a vac canopy to pose the sliding sections open.

 

 

 

 

 

 

I'm going to do VN-3 markings.

 

"Training Squadron Three (VN-3) was one of many units formed to fulfill this goal. It took up residence at Chevalier Field in Pensacola Florida. The detachment became VN3D8-a when in 1943 a second detachment of VN-3, VN3D8-b was formed at Saufley Field, 10 miles north of Pensacola. Both detachments eventually were transferred to one facility at Whiting Field in Milton Florida. VN-3 trained hundreds of pilots to replace those lost in battle and eventually to attain the numbers that would be needed for the big push to win the war. VN-3 was decommissioned in 1947 when the need for large numbers of new pilots diminished."

 

 

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, May 12, 2020 1:05 AM

Your T-38 is getting close!

I'd like to add a Monogram 1/48 T-6 to the GB, I'll be building it as an SNJ-4.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Monday, May 11, 2020 4:05 PM

The anti glare paint is on.

 

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Friday, May 8, 2020 6:44 PM

The Talon is on it's wheels!

 

 

I changed the build plan for the -38. I decided to build it with the rear canopy closed instead of open. As if it was going out on a solo flight.

I'm waiting on one thing from Amazon, a poster. It was shipped weeks ago and they just notified me that its lost in the mail!

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Thursday, May 7, 2020 3:57 PM

I hope to have an update soon. I started to make some progress on the T-38 again.

The plan I had for the T-37 might not work.

I think the ground equipment is almost done.

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, May 5, 2020 5:45 PM

mach71

Which photo would you like on the front page?

You can choose but the first one would work for me.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, May 5, 2020 5:44 PM

Bish

Thanks for the info John. Thats come out really well, lovely looking aircraft.

 

Martin, everything I said after Cornell was completely tongue in cheek, but it was fun to run on with it. 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, May 5, 2020 2:57 PM

Thanks for the info John. Thats come out really well, lovely looking aircraft.

I am a Norfolk man and i glory in being so

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Tuesday, May 5, 2020 8:12 AM

Well done!

 

Which photo would you like on the front page?

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, May 5, 2020 1:20 AM

Looks like the bell has rung on the PT-19.  The decals were great and I survived the vac canopies, though that seemed in doubt for a little while.  A pretty good resin kit, maybe one of the better ones to try if you haven't built a resin kit yet.

 

 

 

With the Revell PT-13 Stearman

 

And with a P-40N also.  USAAF trainers were low powered airplanes, but they weren't small.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, May 5, 2020 1:12 AM

Bish

The PT-19 looks nice there John, not a type i am familar with.

 

 
It's just another Tiger Moth analog, Martin.  We had lots of them.  The Canadjuns put a canopy on it and called it a Cornell, and then DeHavilland Canada made a rum copy of that and called it a Chipmunk and the Brits bought it.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, May 4, 2020 3:31 PM

The red on the hawk looks pretty good to me John.

I am a Norfolk man and i glory in being so

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, May 4, 2020 3:30 PM

The PT-19 looks nice there John, not a type i am familar with.

I am a Norfolk man and i glory in being so

  • Member since
    September 2011
  • From: Milaca, Minnesota
Posted by falconmod on Monday, May 4, 2020 1:20 PM

Got paint on the Hawk, twice.  ht e layer was model master fire red and that was way to marroon, had to use the little Testers bottle of red,  I think it's a pretty close match to the color the Revell of Germany intructiond listed. 

Still working on decals

John

On the Bench: 1/72 Ki-67, 1/48 T-38

1/72 EF-111, 1/144 AC-130, 1/72 JL-8

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Monday, May 4, 2020 12:04 PM

Jeaton01 thats coming along nicely! The blue looks perfect.

 

Bish I love the paint on your swallow! The mottling looks perfect!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.