SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Military trainer aircraft Group build 2020

9962 views
197 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, May 4, 2020 2:54 AM

Nice work there mach. I have had a few Eduard sets like that, often older ones or some of the larger sets, like the B-24, has some parts like that especially on curved surfaces. I am not a big fan of liquid mask, but i find when combined with those paper ones they work ok. because you overlap the paper with the liquid, the latter comes away really easy and no need to run a blade around the edge.

I am a Norfolk man and i glory in being so

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Sunday, May 3, 2020 10:37 PM

Looking good John.  I'd like to add this kit to my stash. 

Thanks,

John

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, May 3, 2020 10:29 PM

I'm making progress on the PT-19.  I painted it using Hataka Aggressor Blue C156 and Gunze Mr Color 329 Yellow.  I tried using the six resin rods supplied to build the overturn structure but I swear they were made from mexican jumping beans.  No way. I bent up some very small music wire and just used the resin top piece.  I still have to do a little Epoxysculpt work on the base of the wires to make them look like they extend through the metal fairing.

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Sunday, May 3, 2020 8:50 PM

Nice! I'll get you on the list Andy.

 

  • Member since
    May 2016
Posted by B-36Andy on Sunday, May 3, 2020 3:24 PM

Hi guys! 

I'd like to join! My dad flew the Stearman N2S as a trainer at Ottumwa NAS during the winter of 1944-45. 

After doing some research I've found some pics of the base during that time. 

I've got decals for it also---

Andy

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Sunday, May 3, 2020 3:24 PM

Been a while since my first update. My S-boat has been taking most of my time but finally have some progress to report.

Assembly was finished and everything masked off ready for painting.

Then painting. This was a tricky one, the only photo of this aircraft i have is not clear. I found 4 different paint schemes from various kits or delas. Hasegawa says a mottling of RLM 81/82 all over. The Hobby Boss 48th kit has a splinter camo and one set of decals i found also has a splinter but in different colours. While the Cutting Edge decal sheet says one all over colour either RLM 81 or 83. The photo i have does not show any demarcation between colours, so i went for a single colour opting for the Dark Green 83. Uncdersicdes are RLM 76, no confusion there.

I was really pleased with how the mottling came out.

And then the kit decals.

Thats all for now.

I am a Norfolk man and i glory in being so

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Monday, April 27, 2020 3:36 PM

Minor progress.

 

The canopy's are painted.

 

 

And I umasked the cockpit.

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Monday, April 27, 2020 12:11 PM

I'm masking the T-38 canopys. The kit does not come with any so I bought the Eduard set. It only has the edges for the mask. Odd. I've used Eduard masks before and they had the whole canopy. 

 

 

Not a big deal, just an extra step. They recomend using a liquid mask for the center area.

I've had mixed results with that, so I went with Tamiya tape.

 

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Monday, April 27, 2020 8:19 AM

Thanks!

 

THings are moving along.

  • Member since
    June 2018
  • From: Ohio (USA)
Posted by DRUMS01 on Sunday, April 26, 2020 7:35 PM

Mach71: nice build of the T-37 and ground crew, both look sweet!

Ben

I am a Veteran; to all other Veterans thank you for your service. Retired now and living well

PROJECTS:

- 1/48 RAH-66 Comanche - WIP

- 1/350 USS Alabama (GB) - DONE

- 1/16 1910 Thomas Flyer - DONE

- 1/78 AC-119 Stinger Gunship (GB) - DONE

 

 

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Sunday, April 26, 2020 7:09 PM

Looking good! The kit looks to be of a nice quality! I don't see many pinholes! Every resin kit I build is full of pinholes, so thats great!

 

I spent the day decaling and painting. Getting close on some things.

 

 

I still have to seal the decals and weather the ground equipment.

I did find a partial set of T-37 decals on line today. I hope to get them by the end of the week, then I can finish up the Tweety bird.

 

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, April 26, 2020 5:56 PM

Here's an update on the PT-19.  The cockpit interior was added to with some ALPS printed decal faces courtesy of my computer system and its peripherals, and a store of images I keep adding to from the interweb.  This, like many resin models has fewer parts that injection molded kits and more details are in the castings.  The parts took some heavy duty cleaning and two coats of primer before they were good about holding paint.  I had to do some reshaping on the horizontal stabilizers so they would fit with a straight elevator hinge line.  I think they mostly ended up parallel to the wing centerline.  Otherwise the parts fit a bit better than the average of the resin kits I've built, and the casting quality and surface detail is good.

 

 

 

 

The wing handholds were added to by a music wire replacement for the missing tip bow and were carved a little larger, they will be faired in with Epoxysculpt.

 

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Sunday, April 26, 2020 11:07 AM

Progress is being made.

 

The T-37 is basically done. When I was decaling some of them shattered. I ordered some replacements online, but it will probably be next week before they come.

 

The ground carts were gloss coated and then decaled. I'll wait until tomorrow and see if they need any more Micro set. Then I'll dull coat them and give them some weathering.

 

I should be able to bet moving on the T-38 again soon. I think the paint is good.

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Thursday, April 23, 2020 7:10 PM

John, Any luck getting paint on the hawk?

 

I made a bit of progress on the ground equipment.

  • Member since
    September 2011
  • From: Milaca, Minnesota
Posted by falconmod on Wednesday, April 22, 2020 1:10 PM

the hawk has  gone together pretty well, there were some large gaps where the leading edge met the intake on the bottom side that have been a pain to fill.  the direction are a little lax in telling you what color the gear wells are supposed to be.

Also all the trailing edges were way too thick so I had to file those down.  Maybe paint tonight!

John

On the Bench: 1/72 Ki-67, 1/48 T-38

1/72 EF-111, 1/144 AC-130, 1/72 JL-8

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Wednesday, April 22, 2020 8:05 AM

Welcome, and a great choice!

Even though you were not official before your PT-19, you were always part of this GB!

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Wednesday, April 22, 2020 12:09 AM

I'd like to join in with a 1/48 Planet Fairchild PT-19.

 

Box Art

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Tuesday, April 21, 2020 4:43 PM

That Hawk is looking good! How is it going together?

 

I got the 1st coat of gloss white on the T-37 and the T-38 today along with a coat of primer and then OD on the ground equipment.

 

I only have photos of the tweet.

 

 

 

I have some cleanup to do on the windscreen.

  • Member since
    September 2011
  • From: Milaca, Minnesota
Posted by falconmod on Tuesday, April 21, 2020 4:24 PM

Cockpit for the hawk is ready to be assembled. cockpit assembled and fuselage is together. the plane is ready for primer.

John

 

On the Bench: 1/72 Ki-67, 1/48 T-38

1/72 EF-111, 1/144 AC-130, 1/72 JL-8

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Friday, April 17, 2020 3:03 PM

The tweet got it's 1st coat of primer today.

 

 

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Thursday, April 16, 2020 2:39 PM

Canopy masking time!

 

 

 

Having to mask a canopy by hand really makes me appreciate a nice pre cut mask!

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Thursday, April 16, 2020 8:06 AM

Updated!

That looks nice!

  • Member since
    September 2011
  • From: Milaca, Minnesota
Posted by falconmod on Thursday, April 16, 2020 7:58 AM

I would like to add the Revell of Germany Bae Hawk T.1 to my list.  Since I'm working at at home during this covid business this one jumped out of the pile sitting on my work bench

John

On the Bench: 1/72 Ki-67, 1/48 T-38

1/72 EF-111, 1/144 AC-130, 1/72 JL-8

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Wednesday, April 15, 2020 3:59 PM

Yah, It's from the Hasegawa 1/48 USAF ground crew set.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, April 15, 2020 3:43 PM

Thanks guys.

Thats come together well Mach. Is that ground equipment from one of those Hasegawa sets?

I am a Norfolk man and i glory in being so

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Wednesday, April 15, 2020 3:40 PM

I've been working the seams on the under wing of the T-38. Not much is really working well. I tried Aves putty and thined white putty. I might have to live with them.

 

I've also been working on a small T-37 I found in my stash. It's a 1/72 Hasegawa kit that is missing the instructions.

 

 

Working on the cockpit.

 

 

The big parts are on.

 

 

I'm thinking about a possable diorama with both aircraft.

  • Member since
    March 2010
  • From: Boston
Posted by mach71 on Tuesday, April 7, 2020 3:13 PM

Bish, your 262 looks great! The cockpit is outstanding!

 

Thanks Jeaton. I'll give it a try.

I'm out of white paint, so I have some time.

Some stuff to pass the time today:

 

 

This stuff might be used in this GB.

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, April 7, 2020 12:50 PM

It's coming together nicely, Mach 71.  Those underwing seams might be a candidate for epoxy putty like Milliput and a wet finger.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, April 7, 2020 12:49 PM

Those seats look pretty good, Martin.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.htm

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, April 7, 2020 10:06 AM

First build post from me of the Me 262.

I am adding an Eduard PE set which is designed for the Revell kit but seems to be fitting this well. The pit wnet together quickly, i used the kit decals for the side instruments as tehre was no PE for those bits. The kit seats have been completly replaced with PE.

The pit was then fitted and the fuselage put together.

And the wings were added.

I am building this alongside another aircraft and my S-100 boat so it won't go together as quick as it could, but i hope to have another update soon.

I am a Norfolk man and i glory in being so

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.