SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tamiya 1/35 Sdkfz222

1382 views
6 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Thursday, April 4, 2019 12:31 AM

Also in terms of rust, metal on an armored vehicle varies greatly and the amount of rust on those parts will vary as well. On the actual steel armor plating, you're not going to get much rust. However, on sheet metal items like fenders, brackets, etc. they can get rust especially when they get dinged up, scraped or shot up in combat.

Then there is the unpainted metal of tracks and exhaust components. They tend to get surface rust.

  • Member since
    October 2009
Posted by JacknewbIII on Wednesday, April 3, 2019 8:20 PM

Thanks for the comments and tips everyone. I didn't see any historical of them rusted out like this either so I know I missed the mark on accuracy. I was wanting to try the rust kit and went overboard a bit lol. Next time very minor rusting in specific areas as mentioned above...

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, April 1, 2019 8:11 PM

Yeah as the guys said the rust is a little excessive unless it's supposed to be an abandoned vehicle. Otherwise nice work, the figure came out great.

And as you said those vintage Tamiya models are a great chance to learn about building armour with a cheap kit.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Monday, April 1, 2019 11:38 AM

I agree with Stik, back then, armored vehicles had just replaced horses as the primary mode of transportation of soldiers. Horse soldiers took very well care of their animals and tack. That translated to taking very well care of their mechanical horses.

That tradition remains today with tankers and artillerymen taking very good care of their weapon systems.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, March 31, 2019 10:52 PM

I’m gonna say dial it back several notches. Operational AFVs are not going to be so rusty. Especially on large flat areas of armor. The edges of the stowage boxes and fenders, a little wear and tear is typical. But then it might be a good idea for some dents and bends on that sheet metal. A small bit along hinges and hatches. Paint used on AFVs is pretty tough. And unless it’s a sheet metal area likely to flex, such as the fenders and stowage boxes, it won’t easily chip off. The mufflers will get rusty, but more of a dark shade, not so bright.

 

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Sunday, March 31, 2019 10:51 PM

Cool little project.  Stickpusher just finished one of these.  I'm not an armor guy either.  Figure turned out nice.  I used to have a Nikon coolpix camera that had a great macro feature but would really intensify shades of orange.  

Thanks,

John

  • Member since
    October 2009
Tamiya 1/35 Sdkfz222
Posted by JacknewbIII on Sunday, March 31, 2019 10:28 PM

This is another side project of mine I have been working on in between aircraft builds. I don't know anything about armor (this is my first) but I want to expand into weathered armor kits, landing craft/amphibious vehicles and figures. I found this complete Tamiya kit with figure and PE at goodwill for $2.50 so I figured if I butchered it no big deal. The rust looks a lot brighter with the flash than it does in real life. I used vallejo acrylics for the entire thing and used the vallejo rust kit for those effects. Threw a wash or two on as well and was amazed and how much time you can put into one of these little kits with all of these techniques. I am working up to building a large vessel with something like 3 crew and 20 troops and am just getting my feet wet as I need practice. Critiques and comments welcome. Thanks for looking, Jack

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.