SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tamiya Stuart

1495 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Thursday, June 11, 2020 4:02 PM

Don't worry Pawel, I've got lots of projuscts lined up.....  Wink

You're right: sometimes it's good to do something simple, start to finish, and move on, just what I've done here. Now it's back to the two Magachs in progress, and maybe something else too.......

Apprentice rivet counter.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Wednesday, June 10, 2020 2:05 PM

What - no Israeli Patton? Thats kinda confusing... :-)))

Lookin' good! A nice and quick build is something we all need from time to time IMO.

Thanks for sharing and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Wednesday, June 10, 2020 12:40 PM

Rob: all new tool. I'll be looking for one or two of the old ones though, for the turret. Also, I may yet tone down the end connectors, probably with a little dust.

Apprentice rivet counter.

  • Member since
    June 2019
Posted by sprueman on Wednesday, June 10, 2020 11:02 AM

Great job on a classsic kit.

My wife thinks I procrastinate. I just put things off till she forgets.

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Wednesday, June 10, 2020 10:47 AM

Ah, it still looks good, any "old" parts or all new tool?

I'd have gone with a browner color for the end connectors.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Wednesday, June 10, 2020 10:22 AM

Thanks all. This brought me back to when I had to do all my building on a table in the den and clean it all up after I was "done". I kept all my stuff in a plastic storage box and had to stash it in a cabinet in the trailer to get it out of the way (not much space in a 21 ft travel trailer) and then still be able to get it out in a few minutes later on. I probably spent two or three hours on it during the three days my wife went into Brownsville to work out of their office there, otherwise the "work space" was covered in computers and monitors.

There have been a couple of other times I've brought kits on longer vacations, but usually just sand roadwheels or something, waiting until I'm home to do the "real" work, but I used this trip as an excuse to just do some simple modeling, and it did the trick.

Rob, it's the new Tamiya kit, a much better kit than the original in many ways, most notably the accurate tracks. I'm already thinking about some kit bashing options though, so don't worry Anthony, while it was something of a struggle to build something nearly OOB, I have ideas....   Big Smile

Apprentice rivet counter.

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Tuesday, June 9, 2020 7:17 PM

Nice quick build, Russ. 

Love the dirty look.

- Mike Brindos "Lost Boy"

  • Member since
    September 2004
  • From: Denver
Posted by tankboy51 on Tuesday, June 9, 2020 12:14 PM

That looks like the new Tamiya kit, not the fun Stuart that came out in the 70's.  Of course their new kit is fun as well.  I really like all Tamiya models.  Nice work on yours.

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Tuesday, June 9, 2020 11:57 AM

It looks good, the old Tamiya kits still build nicely.

I used to take a small Walmart tackle box that I put a few small Testors paints, a minimal amount of tools and a small 1/72 scale armor kit and aircraft kit (without boxes) when I traveled.

It was my "TDY" (army speak for temporary duty) travel set. I would be traveling to some school or conference and work on a kit in the hotel room or unaccompanied personal housing apartment they assign us.

I still have it. I know there is an Airfix Gnat (some sort of jet trainer) and a Matchbox 1/76 scale German armored car of some type partially built in the box still.

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Tuesday, June 9, 2020 6:02 AM

Wait a minute Russ,you mean no gigantic conversion,you must be having gigantic withdrawal symptoms, Big Smile

Great job Russ looks great,the joy of a simple Tamiya build 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Monday, June 8, 2020 1:02 PM

A beach build?  Wow, I could never spare enough mental concentration to build a model on a trip!  Well done!

“Ya ya ya, unicorn papoi!”

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, June 8, 2020 11:00 AM

Oh wow that's awesome! 

I normally take a couple kits on vacation so I can clean up road wheels etc while sitting in the motel room in the evenings. But never built and painted an entire model!

And you did a great job on her! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Tamiya Stuart
Posted by RBaer on Monday, June 8, 2020 10:32 AM

While I was at the beach, I brought this along for those days when it was too hot to sit outside. I built it inside a 21 ft travel trailer, at a small table, with only basic tools, kind of a throwback to years ago. Once home I finished a couple of small bits and painted, applied the kit decals and weathered, all in a couple of afternoons, making this the quickest built I've done in over 20 years, other than a Meng toon-tank last year. In a nut shell, I had a blast. It's almost OOB, the only added bits being some tool straps from masking tape. The only problem I had was the yellow stripe decals: they were nearly translucent, so after a flat sealer coat, I went beck with some Vallejo yellow and darkened them in a few spots. Some of the bulkier plastic parts were thinned, but that's it. I used the kit figure's torso and head, with different arms, not because I flt it was an improvemant but because since I have a little extra time, I'l trying to do figs for ALL the finished and in progress models I have that have an open hatch or two and I got mixed up. I used the kit tow cable ends after fillling the "slots" and drilling the ends and spare soft wire for the cable.

 IMG_1340 by Russel Baer, on Flickr

 IMG_1342 by Russel Baer, on Flickr

 IMG_1343 by Russel Baer, on Flickr

 

Apprentice rivet counter.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.