SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Williams Bros. Schoenfeldt Firecracker

548 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September, 2012
Williams Bros. Schoenfeldt Firecracker
Posted by GMorrison on Thursday, April 05, 2018 1:02 AM

I searched my stash for anything left from WB and found this thing.

There's been several really nice WB models shown, so I wanted to jump on the train.

  • Member since
    November, 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Thursday, April 05, 2018 8:36 AM

That's another aircraft genre I really like from WB- their racing planes.  I have their Hall Racer in the queue to my bench- hopefully get on it this summer.

 

Don Stauffer in Minnesota

  • Member since
    March, 2015
Posted by qlabs on Thursday, April 05, 2018 3:58 PM

I just recently put this together. There are some very notable seam lines and even differences on lines for each half of the fuselage. The rudder on my kit had different locations, thing didn't line up where the rudder met the vertical stab. It glued together but didn't actually match.
Also the fit of the glass to the fuselage needed a lot of filling, along with the wing.

Very neat subject matter, just needs some love when assembling.

  • Member since
    May, 2006
Posted by Rob Beach on Thursday, April 05, 2018 10:27 PM

Aye, WB kits are wonderful little beasties that seem to often inspire stubborness in the modeler. With tender fettling and careful dry fitting, the results can be pretty amazing.  My Curtiss Sparrowhawk awaits my renewed attentions even now... best wishes on your Firecracker, I know you will do it proud!

Regards, Robert

  • Member since
    September, 2012
Posted by GMorrison on Friday, April 06, 2018 12:28 AM

I've cut out the wheel wells and drilled out the oil cooler.

  • Member since
    December, 2002
  • From: Northern California
Posted by jeaton01 on Friday, April 06, 2018 12:36 AM

Balloons

John

To see build logs of my models, go here: http://goldeneramodel.com/mymodels/mymodels.htm

  

  • Member since
    September, 2012
Posted by GMorrison on Friday, April 06, 2018 9:31 PM

Calling it a day. Lots and lots of flash, and the halves of the part sprue had slipped so every part has a step.

But it's shaping up. The edges of the wings and stabs are really thick, but I'm not really able to do much more than make them clean.

I can't find any period pictures of racing cockpits except looking forward. I assume the pilot at least had a seatbelt?

  • Member since
    September, 2012
Posted by GMorrison on Monday, April 16, 2018 12:10 AM

Starting to look like an airplane.

400 pound engine up front on a 1300 pound fully loaded aircraft.

There's some info on the replica, flown by Gen (Ret) Pat Halloran.

With a Ranger engine, because the original Menasco Super Buccaneer is a museum piece.

275 mph. It could outpace the military fighter of the time in 1929, the Boeing P-26

No way to slip on the approach, it would snap at level flight.

 with any rudder.

No way to keep the ball centered, the nose always wanted to dive,

Gen. Halloran wore a parachute. It took him a month to fly the delivery.

 

  • Member since
    May, 2013
  • From: Indiana, USA
Posted by Greg on Monday, April 16, 2018 6:46 PM

Gee, that sounds fun to fly. Interesting real-life info, I'd never have guess those things would be such a handful.

Having never heard of Williams Bros, I looked them up and they seem to be alive and kicking, no?

Interesting array of kits.

I'll be watching.......

 

-Greg

  • Member since
    November, 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Tuesday, April 17, 2018 9:28 AM

Greg

 

Having never heard of Williams Bros, I looked them up and they seem to be alive and kicking, no?

Interesting array of kits.

I'll be watching.......

 

 

Yes, the originators sold out to the new firm.  They have promised to repop a number of the old kits, but it is sure taking them long enough to do it.  But I suppose getting the capital in the hobby business is hard.

 

Don Stauffer in Minnesota

  • Member since
    May, 2013
  • From: Indiana, USA
Posted by Greg on Tuesday, April 17, 2018 9:45 AM

Don Stauffer

 

 
Greg

 

Having never heard of Williams Bros, I looked them up and they seem to be alive and kicking, no?

Interesting array of kits.

I'll be watching.......

 

 

 

 

Yes, the originators sold out to the new firm.  They have promised to repop a number of the old kits, but it is sure taking them long enough to do it.  But I suppose getting the capital in the hobby business is hard.

 

 

Ahah. That explains why their website looks so new and robust. Thannks for the input, Don.

I'll bet you're right about raising capital in the model/hobby business. I'd never thought of that.

 

-Greg

  • Member since
    September, 2012
Posted by GMorrison on Saturday, April 21, 2018 12:52 AM

Here we go low, left and fast...

The canopy didn't fit at all.

The gap was about 0.04 so I cut a piece of plastic out of that thickness, stuck it in the gap, and traced the profile. Cut and sanded just a little oversized.

 

Painted to look like plywood.

Installed.

 

 

  • Member since
    April, 2003
  • From: USA
Posted by keavdog on Saturday, April 21, 2018 1:35 AM

Whoa!  Now that's a seam!!! :-o

Thanks,

John

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

FREE NEWSLETTER