SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Yet more 1/2500th Star Trek ships

3418 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2010
Yet more 1/2500th Star Trek ships
Posted by Klik on Sunday, March 8, 2015 6:17 PM

OK, these were a Christmas present that I finished a while back. To be honest, I debated ever posting these (they aren't exactly my best work), but since I was on here anyway, here goes.

These were from the DS9 Cadet Series set.

First off, the USS Saratoga, which I used the kit-supplied decals on. I hate, hate, hate the decals that these kits come with (which I why I always paint them however I please), because the decals are super thin and prone to tearing, and don't want to stick to any surface. If you choose to use them, use some sort of decal settling solution, which I didn't.

Next one was the USS Defiant, which I masked and painted how I wanted. I wondered what the Defiant would look like with a red paint scheme, faded and scratched from overuse. I kind of free-handed the markings.

The best part of this kit was its simplicity: the Defiant is only FOUR pieces! Crazy, right?

Finally, a Cardassian Galor-class cruiser, which I actually finished first, and spent the most time detailing.

I blacked out the markings to avoid using anymore decals on this ship. I think it looks a little more intimidating without them, what about you?

In the course of 'research' into the ships in this set, I came across some controversy in the 'actual size' of the USS Defiant (Producers of the TV series and the films rarely had any consistency in the sizes of the ships, unless they set its size ahead of time), so out of curiosity, I calculated the size of the ship in 1/2500th and converted it up to actual size. Interestingly enough the ship is 175 meters from stem to stern (which is 5 meters shorter than the Soviet Typhoon-class Submarine).

For a size comparison, I set it up next to Enterprise-E (another 1/2500th kit that I painted my way).

In 'First Contact', there was a scene with these two ships next to each other, where the Defiant was completely dwarfed by the E. As you can see here, the size difference is not that large.

Any how, with that put to rest, as it were, I'll end this with a close-up of my Enterprise-E, because I am very proud of how its name turned out, and this is my post, so I feel like showing off a bit:

Thanks for looking, everyone.

Comments, Criticisms, and Critiques welcomed, encouraged, and demanded.

Klik

oneyearwar1

The hardest part of flying isn't flying...it's landing.

  • Member since
    January 2010
Posted by Klik on Sunday, March 8, 2015 6:18 PM

EDIT:

The Defiant was actually SIX pieces.

oneyearwar1

The hardest part of flying isn't flying...it's landing.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, March 8, 2015 7:06 PM

They came out pretty darn well Klik!!! I didn't even know this set existed till I saw it in the hobby shop last week so this is very timely.

I wouldn't worry too much about the size of the Defiant, the scales on the series always seemed a mess. Someone with a lot of time on his hands calculated that for the Klingon B'Rel class Bird of Prey scout to fit with all appearances there would have to be EIGHT different sized versions of the BoP!!!!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    January 2010
Posted by Klik on Sunday, March 15, 2015 12:58 PM

Thank you for the comment, Gamera. I've noticed that almost no-one posts comments on Star Trek models, which is why I was hesitant to post these at all. They really were a blast to build (and only took a few days to finish up). I may need some new pictures, though. They seem a little dark to me.

In regards to the Klingon BoP, I read that post online, which is why I was curious about the actual size of the Defiant. I found another well-put together post that stated that the Defiant changed size from 124 all the way up to over 1000 meters long, depending on the episode (or film, as noted in my first post). The article stated that the most likely (read: most common scale that the model-makers had in mind when they built the filming miniature, which, may I remind you, has windows on it) length is exactly 175 meters, so I was pleasantly surprised that this was the scaled-up size of the 1/2500th scale ship. (Also, I must note that the ship is only 4 decks thick, with a 'possible' 5th deck along the undersides of the nacelles.)

What surprised me even more is that the Defiant looks tiny, with markings or without, but when placed next to ship of the same scale, it's huge. Personally, I think it's a neat little ship, and looks like a Starfleet ship that was cut down to the bare minimum on everything but weapons.

Klik

oneyearwar1

The hardest part of flying isn't flying...it's landing.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, March 15, 2015 7:23 PM

Not a problem Klik I love seeing them. I know what you mean- I posted a few figures years back and there didn't seem to be much interest so I stopped.

Yeah the Defiant was all over the place. I've gotten so I just roll with it. She was a very cool looking ship, I played one in Star Trek Online for awhile.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2007
  • From: Belton, MO
Posted by natvtxn on Monday, March 16, 2015 8:22 PM

I saw this set at my local hobby shop last weekend. Neat looking set. I like the small ones, they don't take up too much room, which just means extra room for more models! Nice job Klik, thanks for sharing.

  • Member since
    August 2012
Posted by JMorgan on Saturday, May 23, 2015 1:33 PM

I find the decals actually stick too well when you have a gloss surface. Use Future and if they do stick too well thin the water with a couple drops of Dawn.

  • Member since
    August 2011
  • From: Earth, for now
Posted by BashMonkey on Tuesday, June 2, 2015 9:53 AM

JMorgan

I find the decals actually stick too well when you have a gloss surface. Use Future and if they do stick too well thin the water with a couple drops of Dawn.

If I have decals to be placed, even if I am planning a matte finish I always start with a gloss coat, it makes placing decals way easier, then after installation a matte finish can be applied.

 ALL OF YOUR BASE ARE BELONG TO US!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.