SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Resumption of Model Shipways Harriet Lane..

1473 views
33 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March, 2005
Resumption of Model Shipways Harriet Lane..
Posted by philo426 on Thursday, September 06, 2018 4:20 PM

Re started the Harriet Lane.I starred the deck houses and will run the wires through the hull and display base with a plug in 4 AA battery power source whuch has a built in on/off switch 

  • Member since
    May, 2008
  • From: Wyoming Michigan
Posted by ejhammer on Thursday, September 06, 2018 8:19 PM
Great idea. Can you explain more about how you wired it and the parts you used? When I did my 1/700 ESSEX I lighted it, but had a 4 AA battery box in the bottom of the base. What a pain to change the batteries. EJ

Completed - USS ESSEX 1/700 Hasegawa Dec 1942, USS Yorktown 1/700 Trumpeter 1943. In The Yards - USS ESSEX 1/700 Hasegawa 1945, USS ESSEX 1/700 Dragon 1944, USS ESSEX 1/700 Trumpeter 1945, USS ESSEX 1/540 Revell (vintage) 1962, USS ESSEX 1/350 Trumpeter 1942, USS ESSEX LHD-2 as commissioned, converted from USS Wasp kit Gallery Models. Plus 35 other plastic and wood ship kits.

  • Member since
    March, 2005
Posted by philo426 on Friday, September 07, 2018 9:41 AM

Well I wanted the paddle wheels to turn although I will never put it into the water.I used an AMT Slot Stars mechanism and made the wheels from turned.80 styrene with mahogany planks as paddles.When I make the display base ,I Will cut a rout for the wires and connectors.  

  • Member since
    May, 2008
  • From: Wyoming Michigan
Posted by ejhammer on Friday, September 07, 2018 9:47 AM
Thank you. I need to find a source for the male and female plug for the base and the battery box with a switch. Thanks for your info. EJ

Completed - USS ESSEX 1/700 Hasegawa Dec 1942, USS Yorktown 1/700 Trumpeter 1943. In The Yards - USS ESSEX 1/700 Hasegawa 1945, USS ESSEX 1/700 Dragon 1944, USS ESSEX 1/700 Trumpeter 1945, USS ESSEX 1/540 Revell (vintage) 1962, USS ESSEX 1/350 Trumpeter 1942, USS ESSEX LHD-2 as commissioned, converted from USS Wasp kit Gallery Models. Plus 35 other plastic and wood ship kits.

  • Member since
    March, 2005
Posted by philo426 on Friday, September 07, 2018 12:56 PM

I found these connectors at Harbor freight and the battery box at work.  

  • Member since
    July, 2014
  • From: Philadelphia Pa
Posted by Nino on Sunday, September 09, 2018 5:48 PM

     Beautiful  job on the Ship and the gearing.  No cheap nylon teeth here.Those Paddlewheels are going to "sing". 
 
How was the MSW Harriet Lane to put together?  Much sanding?
 
     And I am curious, is the kit about the same size as the 1/144ish Pyro/Lindberg   Harriet Lane-Civil War Blockade Runner?  The old Pyro kit's hull is 15.5" and it is about  18" long including bowsprit.  The story is that Pyro copied the Model Shipways kit. 
 
 Thanks for starting this thread.
 
       Nino.
  • Member since
    March, 2005
Posted by philo426 on Tuesday, September 11, 2018 1:26 PM

Thanks for the kind words!She is about 19 inches long.I have heard that Pyro did pirrate this kit but I peronally do not know it for a fact .  

  • Member since
    March, 2005
Posted by philo426 on Tuesday, September 11, 2018 1:28 PM

I got the deckhouse painted and installed.  

  • Member since
    March, 2005
Posted by philo426 on Tuesday, September 11, 2018 1:30 PM

I got the whistle together.   

  • Member since
    March, 2005
Posted by philo426 on Friday, September 14, 2018 9:43 AM

Okay!I used wire for the handrails atop the wheel boxes and the kit supplied stanchions!Next up ,I have to construct the skylights.  

  • Member since
    July, 2013
Posted by steve5 on Friday, September 14, 2018 4:21 PM

just caught up with this thread  . looking very cool .

 

  • Member since
    March, 2005
Posted by philo426 on Saturday, September 15, 2018 3:11 PM

Thanks!

  • Member since
    December, 2010
  • From: Salem, Oregon
Posted by 1943Mike on Saturday, September 15, 2018 9:30 PM

Looks very good so far.

Question: how fast (rpm's) will the paddle wheels turn when you throw the switch? Since you have no desire to ballast and launch your ship I'm assuming you've got the mechanism geared down enough so it'll look realistic?

Mike

"Le temps est un grand maître, mais malheureusement, il tue tous ses élèves."

Hector Berlioz

  • Member since
    March, 2005
Posted by philo426 on Tuesday, September 18, 2018 3:01 PM

Yes i think 3 volts might be better.I used some parts from a Minicraft titanic to add skylights and ventilators. i turned a plastic ring with mt dremel and added eyelets to chain  down the stack.  

  • Member since
    March, 2005
Posted by philo426 on Saturday, September 22, 2018 10:48 AM

Added hatches and a skylight aft and added the Dalghren guns.  

  • Member since
    March, 2005
Posted by philo426 on Sunday, September 23, 2018 8:20 AM

Cut out the rudder and added gudgeons and pintels.  

  • Member since
    March, 2005
Posted by philo426 on Wednesday, September 26, 2018 6:55 AM

Got I mounted upl  

  • Member since
    March, 2005
Posted by philo426 on Thursday, September 27, 2018 10:07 AM

Made the wheel house mounted the wheel and put on the pedestal for the binnacle.  construction the masts will commence soon.    

  • Member since
    March, 2005
Posted by philo426 on Friday, September 28, 2018 8:10 AM

Got the ships boats ready and painted.  

  • Member since
    March, 2005
Posted by philo426 on Friday, September 28, 2018 4:35 PM

Mounted up the davitts and boats.

  • Member since
    March, 2005
Posted by philo426 on Saturday, September 29, 2018 1:36 PM

Started building the masts and installed the eylets.  

  • Member since
    March, 2005
Posted by philo426 on Tuesday, October 02, 2018 9:44 AM

Getting the deadlines ready for the ratlines,  

  • Member since
    March, 2005
Posted by philo426 on Tuesday, October 02, 2018 9:45 AM

  • Member since
    March, 2005
Posted by philo426 on Wednesday, October 03, 2018 7:50 AM

  • Member since
    December, 2003
  • From: 37deg 40.13' N 95deg 29.10'W
Posted by scottrc on Wednesday, October 03, 2018 10:41 AM

Cool work on functioning side wheels on your Harriet Lane.  

  • Member since
    March, 2005
Posted by philo426 on Wednesday, October 03, 2018 3:37 PM

Thanks!

  • Member since
    March, 2005
Posted by philo426 on Friday, October 05, 2018 3:15 PM

Further foremast work and ratlines.   

  • Member since
    July, 2014
  • From: Philadelphia Pa
Posted by Nino on Friday, October 05, 2018 4:58 PM

philo426

... turned a plastic ring with mt dremel and added eyelets to chain  down the stack.  

 

  The Chain to support the stack looks a bit large. Is that what came with the kit?

The ship is looking better and better. The deck "furniture" is looking real good!  Great work.

 

      Nino.

  • Member since
    March, 2005
Posted by philo426 on Saturday, October 06, 2018 8:52 AM

Yes the chains are a but large but do impart a steampunk vibe I liked.Rigged up the spars.   

  • Member since
    March, 2005
Posted by philo426 on Saturday, October 06, 2018 8:53 AM

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.