SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Scratch Built 1/12 Mercury Redstone

899 views
18 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June, 2005
  • From: Novi, Mi
Scratch Built 1/12 Mercury Redstone
Posted by Lancair IV on Tuesday, June 12, 2018 5:06 PM

I've been planning this for some time and started on her the end of January.  Launch Table is complete, and the Tail Unit is ready for the thousands of rivets.

 

I plan on building the Atomic City Mercury Capsule to sit on top dressed as Gus Grissom's Liberety Bell 7.

 

Rob Byrnes

Novi, Mi

  • Member since
    March, 2017
Posted by Gerg on Wednesday, June 13, 2018 9:48 PM

Very impressive start. Excellent work. I can't wait to see more. If my math is correct it should measure somewhere in the neighborhood of 83 inches?

I have asperations to build a 1/72 Saturn. That will be an undertaking but nothing like this beast.

 

  • Member since
    November, 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Thursday, June 14, 2018 8:50 AM

Looks great.  I will be following this thread closely. Real space is one of the genre that I do scratch occasionally.

 

Don Stauffer in Minnesota

  • Member since
    May, 2011
  • From: Honolulu, Hawaii
Posted by Real G on Thursday, June 14, 2018 5:24 PM

Holy moly, that is a great start to one incredible project!

Next up on your list should be... a Saturn V.  Stick out tongue

  • Member since
    November, 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Saturday, June 16, 2018 9:17 PM

That's exquisite.

Are you planning on keeping the parts separate in case they need to be moved?

Since it's likely for be about 7' tall and all.

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Sunday, June 17, 2018 7:41 AM

CapnMac82

That's exquisite.

Are you planning on keeping the parts separate in case they need to be moved?

Since it's likely for be about 7' tall and all.

 

 

Yes.  All sections will come apart.  The Capsule will be lit.

Rob Byrnes

Novi, Mi

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Saturday, June 23, 2018 11:03 AM

Over 800 rivets applied so far.  long way to go

Rob Byrnes

Novi, Mi

  • Member since
    July, 2014
Posted by Bakster on Saturday, June 23, 2018 2:20 PM

Awesome work as usual. Watching.

 

 

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Sunday, June 24, 2018 8:09 PM

 

The zone between Fins 1 and 4 is complete.  So far I've placed about 1,400 Rivets

Rob Byrnes

Novi, Mi

  • Member since
    April, 2003
  • From: USA
Posted by keavdog on Sunday, June 24, 2018 8:51 PM

Wow!  Impressive work.   How tall will the entire piece be?

Thanks,

John

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Monday, June 25, 2018 4:37 PM

keavdog

Wow!  Impressive work.   How tall will the entire piece be?

 

 

Almost 7 feet

Rob Byrnes

Novi, Mi

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Friday, June 29, 2018 5:07 PM

What a long dragged out process. I'm half complete with the rivets. I started applying the rivets on 6/18/18. So far over 2,500 have been applied. Guess I need to order more rivets...…….

Have a great weekend

 

Rob Byrnes

Novi, Mi

  • Member since
    July, 2014
Posted by Bakster on Friday, June 29, 2018 6:39 PM

Awesome work Rob. Keep keeping on. I am cheering you on.

 

 

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Thursday, July 05, 2018 4:50 PM

 

One more section to go.  Approximately 3,700 rivets applied so far.

Rob Byrnes

Novi, Mi

  • Member since
    June, 2018
  • From: Ohio (USA)
Posted by DRUMS01 on Friday, July 06, 2018 1:03 AM

Are you dreaming about rivets yet? How many bits have you used up with the drilling? Do you fingers have any skin left on them? Confused

Seriously, this is showing both great dedication AND modeling skills. I am staying tuned into this build till completion. If the upper stages equal this part of the build, we are in for a treat!.....

Ben

I am a military veteran and am proud to call other veterans, regardless of military branch, brothers and sisters; God bless you all and thank you for your service. I hope you have found peace, enjoyment, and success after your tour of duty as you have earned it...

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Monday, July 09, 2018 8:49 PM

Thanks guys.

Finished the rivets on the Tail Unit tonight.  Approximately 4,800 rivets.

 

Rob Byrnes

Novi, Mi

  • Member since
    June, 2018
  • From: Ohio (USA)
Posted by DRUMS01 on Monday, July 09, 2018 11:02 PM

WOW, this build it riveting!....

Sorry, but I could not help that one Wink

I am a military veteran and am proud to call other veterans, regardless of military branch, brothers and sisters; God bless you all and thank you for your service. I hope you have found peace, enjoyment, and success after your tour of duty as you have earned it...

  • Member since
    December, 2012
Posted by rwiederrich on Wednesday, July 11, 2018 12:59 PM

Not to be the clueless one in the room....but I would suspect all those rivets would have been flush mounted..as was with aircraft rivets......?

Was this a unique situation?

 

Rob

  • Member since
    June, 2005
  • From: Novi, Mi
Posted by Lancair IV on Wednesday, July 11, 2018 4:59 PM

rwiederrich

Not to be the clueless one in the room....but I would suspect all those rivets would have been flush mounted..as was with aircraft rivets......?

Was this a unique situation?

 

Rob

 

 

You would think.  The Mercury Redstone was designed between 1950 and 1952 by Chrysler and was a direct descendant of the German V-2 Rocket which was also riveted together.

The entire rocket is not riveted.  Only the Tail Section, and Instrument Section are riveted.  A portion of the Propellant Section is, but most of it is welded.

This is a reference picture of a Redstone Rocket.

Cheers

Rob Byrnes

Novi, Mi

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS

FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.