SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Aircraft Instrument “Glass”

524 views
10 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2021
Aircraft Instrument “Glass”
Posted by RichE on Wednesday, April 7, 2021 8:45 AM

I was reading in recent issue about using Elmer's glue to create instrument glass. While shopping I found Elmer's CLEAR. A small dot off a toothpick settles and spreads into a crystal clear circle and several days later it is still flexible.  

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Wednesday, April 7, 2021 3:15 PM

Nice!  I use Future for the instrument glass, but that Elmer's Clear product sounds good, too.  It reminds me of MicroScale's Krystal Klear.  I wonder if you could use that Elmer's product to make small windows, such as on a 1/72 scale aircraft, or the smaller windows on a 1/48 B-17, or something similar.

The bigger the government, the smaller the citizen.

 

 

  • Member since
    January 2020
  • From: Maryland
Posted by wpwar11 on Wednesday, April 7, 2021 3:18 PM

I didn't know Elmers had a clear glue.  For this same technique I use Vallejo gloss varnish.  Bought it thinking I was going to use Vallejo paints but never did.  I'm going to have to try the Elmers.

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Thursday, April 8, 2021 9:40 AM

I use a drop of Testors glosscoat.  I have a bottle of the stuff- comes in handy at times.  If the kit has an instrument decal, I often drill out the instrument holes in the plastic panel and just glue the instrument decal behind the panel, then put the drop of clear in the hole with a toothpick. It does not smear out because the panel hole restrains it.

Big advantage of glosscoat to me is the quick dry.

 

Don Stauffer in Minnesota

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, April 8, 2021 10:49 AM

I use Evostick wood glue for the same thing. And yes you can use it to make small windows. I have also used it for landing lights. Not completly clear but good enough.

I am a Norfolk man and i glory in being so

  • Member since
    July 2012
  • From: Douglas AZ
Posted by littletimmy on Thursday, April 8, 2021 8:51 PM

I also use Glosscote. Just a dab on the tip of a toothpick.

 Dont worry about the thumbprint, paint it Rust , and call it "Battle Damage"

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Friday, April 9, 2021 7:51 AM

RichE

I was reading in recent issue about using Elmer's glue to create instrument glass. While shopping I found Elmer's CLEAR. A small dot off a toothpick settles and spreads into a crystal clear circle and several days later it is still flexible.  

 

On larger gauges, I use Bondic (hardened by UV led).  The key is to get just the right amount to achieve a level, or domed surface.  These are large gauges on the Mifistofele model.

https://media.fotki.com/2v2JMb1KhxBoFJC.jpg

 

  • Member since
    November 2009
  • From: Twin Cities of Minnesota
Posted by Don Stauffer on Friday, April 9, 2021 8:05 AM

dlh

 

 
RichE

I was reading in recent issue about using Elmer's glue to create instrument glass. While shopping I found Elmer's CLEAR. A small dot off a toothpick settles and spreads into a crystal clear circle and several days later it is still flexible.  

 

 

 

On larger gauges, I use Bondic (hardened by UV led).  The key is to get just the right amount to achieve a level, or domed surface.  These are large gauges on the Mifistofele model.

https://media.fotki.com/2v2JMb1KhxBoFJC.jpg

 

 

Is that one of the brands that come with the resin in a sqeeze tube with laser on end of tube?  I have not seen it.  Where do you find it? Beatiful dash for the Meph!

 

Don Stauffer in Minnesota

  • Member since
    January 2020
  • From: Maryland
Posted by wpwar11 on Saturday, April 10, 2021 10:16 AM

Wow!  That dash is stunning.

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Saturday, April 10, 2021 10:19 AM

Hi;

 I was doing a lot of 1/24 Planes in paper. Using model car aftermarket bezels for the instruments and A product from Testors " Model Master " line called " Boyds Clear Coat".I would put in a drop or two, wait a day and put another layer on it and it looked just like the slightly domed effect that's shown on the Mephsistofele Dash that Don sent in the photo.

   

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.