Matching Tamiya TS paint to Tamiya XF and X paint........HELP!

Here you go...

TS-1 = XF-64
TS-2 = XF-61
TS-3 = XF-60
TS-4 = XF-63
TS-5 = XF-62
TS-6 = XF-1
TS-9 = X-5
TS-12 = X-6
TS-13 = X-22
TS-14 = X-1
TS-15 = X-4
TS-16 = X-8
TS-21 = X-12
TS-23 = X-14
TS-24 = X-16
TS-25 = X-17
TS-26 = X-2
TS-27 = XF-2
TS-29 = X-18
TS-30 = X-11
TS-32 = XF-25
TS-33 = XF-9
TS-38 = X-10
TS-47 = X-8
TS-61 = XF-67
TS-62 = XF-68
TS-63 = XF-69
TS-66 = XF-75
TS-67 = XF-77
TS-68 = XF-78
TS-69 = XF-79
TS-70 = XF-74
TS-71 = X-19
TS-72 = X-23
TS-73 = X-26
TS-74 = X-27
TS-77 = XF-15

Hopes this helps out.

Jagdwolf,

How did you get the corresponding list? I check the colors at the Tamiya USA and Tamiya Japan web site. The color tabs do not look the same, for example:

TS-66 vs. XF-75

TS-33 vs. XF-9

Thanks Jagdwolf...........and just like keilau asked, I also wonder where you got the list!

I have learned a long time ago never to trust looking at color swatches on the net......too many variables regarding seeing the correct shade.  Color shifts can occur with different monitors, video cards, the image itself, how the image was created - hardcopy scan or RGB color generated using HTML code...........

I agree with keilau that the swatches do not look the same but the TS-66 and XF-75 are indeed the exact same paint color.  I tested last night and I can spot paint with XF-75 over an area of TS-66 and after it dries, there is no difference.

I guess instead of looking at the paint number, we really need to be looking at the paint name.  The lady at my LHS matched the TS-66 with the XF-75 by simply looking for the same names on the paint display.

Thanks for your comments guys.....

RODC

Hi RODC,

Not sure if you're still monitoring this (now ancient) post.  Just yesterday I was "Ranting like Rick" about how Tamiya doesn't just give us a direct XF/X to TS/AS cross-reference chart.  I *know* that the actual paint they use in at least the TS and AS series are indeed the same as the Acrylics.  It works the same with "Frog" tape for example (unlike most other sprays which actually attack the adhesive in all masking tapes I've used).

Anyways, during the construction of two recent HUGE ship projects (1/200 Trumpeter HOOD, and now also her "sister in arms" the Bismarck) I have had to figure out exact paint matches to allow the post-spray touch-ups needed.  In fact, I made sure that if I used TS/AS types I had the matching XF equivelent.  By trial and error I was ablke to determine that:

TS-6 (Flat Black) = XF1 (when air brushed.  hand-brushed was more matt)

TS-32 (HOOD main hull grey) = XF66  "Haze Grey"

TS-33 (Hull Red) =???  (see after.  It's NOT XF-9 directly!)

AS-11 (Medium Grey) = very close to RAL7001 = XF82  (Bismarck Superstructure)

AS-31 (RAF2 Ocean Grey) = XF83  (RAL7000)  (Bismark main hull grey)

TS-68 (Wooden Deck) = XF78

Note, in contradiction to previous popsts, XF9 is more like a "Boxcar Red" (more of a brown) which I actually have used successfully for CN Boxcars (for my other ModelRR hobby).  I haven't found the right "mix" yet but I have seen a mixture ratio elsewhere (which I can't find) that involves XF-9 and XF-7 that comes close to TS33.

BTW - I also discovered a bit of a "trick" to matching up Tamiya spray versus brush-on.  If you use Testor Dullcote to post-spray an area with both paints, it seems to reactivate both, and when it "resets" you get a very nice blend.  I discovered this by accident whilst cursing on a botched paint-job near then end of a B-25 project, and experience the "miracle" of how well this works!

Cheers,

J.Stevenson

St.John's, NL

Hi J.Stevenson,

Thanks for the info.  The I-400 has long been put to bed.  Hard to believe this was 12 years ago.  It is a small world.  I am from Portugal Cove and also the VP of our local IPMS-SJ chapter which has been quite active in the COVID era.  We would love to see new members join and share their knowledge and work.  We meet virtually first tuesday of every month and then at least three times per month, have virtual build sessions with whoever is available.  We all build and just shoot the breeze.  It has been great.  If you are interested, shoot me an email at rod@altiusminerals.com and we can chat further.

RODC

Thank you! I had the same issue with that colour. This list is very useful.

The TS-3 is spot on lwith XF-60,came in handy for my 1/16 Tiger build