SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

"Future"- another new label!

2457 views
12 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2009
  • From: Longmont, Colorado
"Future"- another new label!
Posted by Cadet Chuck on Monday, February 4, 2013 3:03 PM

On page 50 of the March 2013 FSM,  Aaron Skinner has a good explanation of the various incarnations of S. C. Johnson's floor polish, which used to be called "Future", then Johnson bought out the "Future" company years ago and changed the name to "Pledge with Future".  Looking for a bottle in the store today, I found it under ANOTHER new label, different from the one in the photo, and was called "Pledge General Purpose" floor shine, or something like that.  Nowhere on the label was the word "Future".  (I think they are trying to gradually phase out the name.)

Anyhow, it said it was acrylic, for use on tile or vinyl floors only, (not wood) and can be washed off with ammonia, just like the previous packages.  I opened the cap and found it smelled the same.  I stuck my finger in it, and it felt the same, too, getting a bit sticky as it dried, just like the previous stuff.  I concluded it is the same old Future with yet another new name, and the word "Future" was nowhere to be found.  

Found the new stuff at Ace Hardware, then I went to Wal-Mart and found the bottle shown in Aaron's photo for $4.00 less.  So I bought it and certainly now have a life time supply!

Gimme a pigfoot, and a bottle of beer...

  • Member since
    July 2012
Posted by DJinFlorida on Monday, February 4, 2013 3:10 PM

I think I have a lifetime supply as well.  As long as it doesn't go bad.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Monday, February 4, 2013 3:12 PM

Nah, I think it's bulletproof.  I had a bottle for over 10 years and it stayed good as new.

Gimme a pigfoot, and a bottle of beer...

  • Member since
    February 2011
Posted by Hokey on Tuesday, February 5, 2013 11:38 AM

What exactly do you guys use it for?

  • Member since
    July 2012
Posted by DJinFlorida on Tuesday, February 5, 2013 11:57 AM

I use it on the canopies to make them crystal clear.  I also use it on the tape when I mask anything to prevent the paint from seeping through.  And I use it as a decal sealer and gloss coat.  If the finish is too shiny for a particular model, I just hit it with some dullcote.

-DJ

On the bench: 1/48 Avenger, 1/72 P40B
On daughter's bench: 1/72 ID4 Attacker
On wife's bench: 1/48 P40B
In the stash:  1/48 P-51D Mustang , 1/72 F4F-4 Wildcat, 1/48 Huey Hog

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Tuesday, February 5, 2013 1:14 PM

Tile and vinyl floors, too......

Gimme a pigfoot, and a bottle of beer...

  • Member since
    August 2007
  • From: back country of SO-CAL, at the birth place of Naval Aviation
Posted by DUSTER on Wednesday, February 6, 2013 4:27 PM

Cadet Chuck

Tile and vinyl floors, too......

 

The plywood  floor in P-51s - keeps it show room new

Steve

Building the perfect model---just not quite yet  Confused

  • Member since
    May 2006
  • From: Chapin, South Carolina
Posted by Shipwreck on Thursday, February 7, 2013 2:50 PM

There was a discussion on another post about Future lifting. It was suggested that the formual was changed. So I called Johnson's and they told me that they changed the formula.

I am sure it will still work, just not as well. You may want to consider sealing your models with another product.

On the Bench:

Revell 1/96 USS Constitution - rigging

Revell 1/48 B-1B Lancer Prep and research

Trumpeter 1/350 USS Hornet CV-8 Prep and research

 

 

 

  • Member since
    July 2012
  • From: Douglas AZ
Posted by littletimmy on Thursday, February 7, 2013 7:00 PM

It's a dessert topping ! It's a floor polish ! It's a dessert topping !!!!! It's a floor polish !!!!  But wait kid's ... it's both!

 Dont worry about the thumbprint, paint it Rust , and call it "Battle Damage"

  • Member since
    June 2009
  • From: Vancouver, WA
Posted by jarhead_50_5.0 on Monday, April 8, 2013 11:50 PM
I just used the "new" future for a coating prior to decals going down on an F-100D. It isn't quite drying or looking right when it sprays via airbrush.
  • Member since
    February 2007
Posted by mitsdude on Tuesday, April 9, 2013 2:04 AM

Hokey

What exactly do you guys use it for?

Its been over 2 years since this was updated so the photos of current product bottles are out of date but it does an excellent job of answering your questions about what we use it for.

 

http://www.swannysmodels.com/TheCompleteFuture.html

  • Member since
    June 2009
  • From: Vancouver, WA
Posted by jarhead_50_5.0 on Tuesday, April 9, 2013 11:57 AM
Mitsdude, a lot of modelers use it on clear parts, like an aircraft canopy, to coat it after sanding. Or they use it as a gloss clear coat before putting decals on when the paint is a flat/matte finish.

With respect to Mr. Skinner, I think something has been changed. I used the Pledge with future for tile and vinyl floors, but it came out awful. As if the self-leveling from the old "future" label is not asit once was.
Anyone else have this issue?
  • Member since
    December 2006
  • From: Phoenix, AZ
Posted by Fly-n-hi on Tuesday, April 9, 2013 10:00 PM

Something is definitely different about it.  It as if its not as thick or something.  I dipped a couple of canopies in the "new" stuff and the Future separated in spots...like water on a garage floor with oil stains.  It seems to have a higher surface tension.

Because of this I've started polishing my canopies with the Novus polishing system and I think they look just as good as canopies dipped in Future.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.