SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/32 Revell H145M LUH KSK

14208 views
60 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2013
Posted by infofrog on Saturday, January 27, 2018 2:48 PM

Pawel

Hello!

That machine is lookin' good! Nice job! The kit seems indeed to be very nice. If it had something to do with Vietnam War I'd build it myself! Thanks for sharing and have a nice day

Paweł

 

 

Thank you . For 30 USA dollars this one can not be beat . Highly recommend 

I do undestand , I love the Heuys during Vietiam war 

Rick 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Saturday, January 27, 2018 2:13 PM

Hello!

That machine is lookin' good! Nice job! The kit seems indeed to be very nice. If it had something to do with Vietnam War I'd build it myself! Thanks for sharing and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    October 2013
Posted by infofrog on Saturday, January 27, 2018 1:03 PM

I finally finished the Revell H145M LUX build 
I highly recommend this kit . 
Paints Tamiya 
Clear Alclad Aqua Gloss Clear and the last clear Matt Alclad 
Lite Weathering Mig oil 
Enjoy
Rick

 

 

 

  • Member since
    October 2013
Posted by infofrog on Tuesday, January 23, 2018 4:21 PM

 I sprayed couple more coats of clear over decals the other day . This evening squeezed little 502 artist oil on cardboard . The cardboard draws out some of the oils , this will allow the oil to dry faster . Then I applied the wash over the body .
Enjoy
Rick 

 

  • Member since
    October 2013
Posted by infofrog on Sunday, January 21, 2018 2:25 PM

I have the Alclad Aqua Clear applied and finished the decals today . Tomorrow evening I will spray couple more coats of clear for weathering
Enjoy
Rick

 

 

 

  • Member since
    October 2013
Posted by infofrog on Thursday, January 18, 2018 2:58 PM

Thank you All 

I got the landing skid painted . Also white tank on the outside painted and mounted
Enjoy 
Rick 

 

  • Member since
    October 2013
Posted by infofrog on Tuesday, January 16, 2018 6:08 PM

 I have little update . I have the bird painted . Little lite on the color but thats OK. I started to paint some trim and add-ons .

 

Enjoy 

Rick

  • Member since
    October 2013
Posted by infofrog on Sunday, January 14, 2018 9:52 AM

Just little update . 
 My tail boom that attaches the body had some gaps . No biggie , I took Perfect putty filled seam gap .Let sit and primer . 
Enjoy .
Rick 

  • Member since
    October 2013
Posted by infofrog on Thursday, January 11, 2018 4:40 PM

I had little extra time to get this in primer 
Enjoy
Rick 

  • Member since
    October 2013
Posted by infofrog on Saturday, January 6, 2018 2:09 PM

 I guess first off . Me and antenna's do not get alone . I always break them . On the kit YES I broke the antenna , so I got the very small brass tube out for new antenna . I believe , I am ready for primer tomorrow . I will go back over manual an re check
Enjoy 
Rick 

 

  • Member since
    October 2013
Posted by infofrog on Thursday, January 4, 2018 6:55 PM

Pawel

Oh yeah, looks like a nice one and for a decent price! I'm glad you're feelin' better! Good luck completing this baby and have a nice day

Paweł

 

 

Thank you 

 

I have what the thing is called on the front . I also installed the camera
Enjoy
Rick 

 

 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, January 2, 2018 6:48 PM

Oh yeah, looks like a nice one and for a decent price! I'm glad you're feelin' better! Good luck completing this baby and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    October 2013
Posted by infofrog on Tuesday, January 2, 2018 6:37 PM

Im starting to feel better . OMG what a ride that was . Not Good . Anyway I have the Tail Boom mocked up . Looks the part , I really like the kit . For 30 dollars I rank this one 8 or 9 out of 10 .
Enjoy
Rick 

 

 

 

  • Member since
    October 2013
Posted by infofrog on Monday, January 1, 2018 4:06 PM

I have the rear door installed . The fit was very good .
Enjoy
Rick 

 

 

 

  • Member since
    October 2013
Posted by infofrog on Monday, January 1, 2018 11:05 AM

Little update . I have the canopy installed with the hanger supports .
Enjoy 
Rick

 

 

  • Member since
    October 2013
Posted by infofrog on Sunday, December 31, 2017 10:58 AM

Working on the hanger supports , I lost one . I looked and could not find it . I stretched small section of plastic sprue , then punch out couple round mounts .

Enjoy

Rick

 

  • Member since
    October 2013
Posted by infofrog on Saturday, December 30, 2017 1:57 PM

Pawel

Yeah, it's starting to take shape now! Good luck with it and have a nice day

Paweł

 

 

Thnak you 

 

 I mocked up the front canopy to check fit . The top point part has some gap .I'm going  installing plastic card and will sand to smooth fit . Beside that area . The canopy fits good
Enjoy 
Rick 

 

 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Friday, December 29, 2017 1:23 PM

Yeah, it's starting to take shape now! Good luck with it and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    October 2013
Posted by infofrog on Friday, December 29, 2017 7:14 AM

 the landing gear has been installed . I really love the detail this kit has to offer .

Enjoy Rick 

 

 

 

  • Member since
    October 2013
Posted by infofrog on Monday, December 25, 2017 8:41 AM

Pawel

Hello!

I sure do hope you'll get better soon! That front seam looks a lot better now. Let's just hope it won't re-appear in a day or two - surfacer makes that to you sometimes... Now the side seams could use some treatment too!

Good luck with your build and have a nice day

Paweł

 

 

Thank you 

 

 I hope Everyone had great Christmas here . I got to do little glue up. Still not 100 percent better not sure 50 percent better . This walking pneumonia is different beast . Anyway here is few photos 
Enjoy
Rick 

 

 

Landing gear parts

I glued the engine cover into place 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Friday, December 22, 2017 4:58 PM

Hello!

I sure do hope you'll get better soon! That front seam looks a lot better now. Let's just hope it won't re-appear in a day or two - surfacer makes that to you sometimes... Now the side seams could use some treatment too!

Good luck with your build and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    October 2013
Posted by infofrog on Friday, December 22, 2017 4:48 PM

After reorganizing my work area it drained me . I went to bed for 4 hours . Good Lord I hope tomorrow gets better . Yesterday I did apply Mr Hobby 500 Primer over the front landing gear seam with tooth pick . This 500 is almost like thick liquid body filler . Today I Sanded the primer down and sprayed couple light coats of primer . Looks very good
Enjoy
Rick 

 

 

 

  • Member since
    October 2013
Posted by infofrog on Thursday, December 21, 2017 4:18 PM

 I have the bottom prime Thats it for today . I have the front seam to fix . No Biggie
Rick

 

  • Member since
    October 2013
Posted by infofrog on Thursday, December 21, 2017 3:32 PM

I cleaned the perfect putty , now I'm ready to prime the area

Enjoy
Rick 

  • Member since
    October 2013
Posted by infofrog on Thursday, December 21, 2017 10:56 AM

Day 4 had bad night last night , I do feel things breaking up in the chest . If this starts clearing up I hope to feel much better . Anyway I took off work again , I sprayed one lite coat primer , II let this dry . I applied Perfect putty over landing gear seem . Not trying to fill the seem , just improve the look . I love Perfect Putty for this reason .
Enjoy 
Rick

 

  • Member since
    October 2013
Posted by infofrog on Wednesday, December 20, 2017 6:47 PM

 I did the best I could on the landing gear plate . I may go around the gaps with perfect putty this weekend . Looks ok for now . Im off to bed 
Rick 

 

 

  • Member since
    October 2013
Posted by infofrog on Wednesday, December 20, 2017 6:46 PM

Pawel

Sorry to hear that, Rick - I hope you get well soon!

Paweł

 

I went to the Dr . I have the correct meds now .. 

 

 I reworked the top cover to fit the profile , looks good .Pat on the back .
Rick 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Wednesday, December 20, 2017 6:17 PM

Sorry to hear that, Rick - I hope you get well soon!

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    October 2013
Posted by infofrog on Wednesday, December 20, 2017 2:51 PM

Pawel

Hello Rick!

Nice progress here! I hope you will be able to fit that bottom plate better - it's actually a nice feature, because it allows the bottom of the fuselage to be as nicely detailed as the sides. I also think you should dry fit the skids now, so as to avoid problems later. Thanks for sharing and good luck with your build, have a nice day

Paweł

 

 

thanks . I been very sick this week . I may wait few days on the bottom plate 

Rick

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.