SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Working Bridge and Boat Diorama

22899 views
376 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2018
Posted by PeterPan on Saturday, April 21, 2018 3:16 PM

Griffin25

Those are riverbank / bay rocks for sure. Great job. Very realistic. Scratch some to scale crabs and then it's off charts! That is some great work bud. 

Thank you Griffin25 for kind words.

Great idea about the crabs.

Peter

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Saturday, April 21, 2018 7:44 AM

Lol, the buoy does look a lot like a giant squid!!!

 

And nice work on the cork rocks. Around here we call them riprap, I'm not sure if your term would be the same. Just another wierd bit of trivia I picked up from a job years ago.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2015
Posted by Griffin25 on Friday, April 20, 2018 11:13 PM

Those are riverbank / bay rocks for sure. Great job. Very realistic. Scratch some to scale crabs and then it's off charts! That is some great work bud. 

 

 

Griffin

  • Member since
    January 2018
Posted by PeterPan on Friday, April 20, 2018 5:53 PM

Preparing to add cork rocks along the riverbank.

Spent a few extra hours cutting the cork snading block pieces with a knife. This was needed to bring the pieces to a better scale, and to add sheer-fractures to the rock.

Experimented with assembling and painting the pieces. Discovered that it is best to lay each rock at a time.

The last photo shows how I will paint the rocks, with a silt-wash to show previous flooding and tidal line.

By using a long haired artist brush I was able to paint all the cracks. Felt that it is best to glue the cork to cork. However, I will paint the base with a very dark colour before glueing the cork pieces.

 

 

C to E did not work out to good.

 

Peter

  • Member since
    January 2018
Posted by PeterPan on Friday, April 20, 2018 5:44 PM

modelcrazy

Fighting a giant squid.

Yep, and now the buoy has a more plausible story of how a crane mishap turned a damaged buoy into a giant squid. That shocked crewman must have been trippingBig Smile

Peter

  • Member since
    January 2018
Posted by PeterPan on Friday, April 20, 2018 5:39 PM

Gamera
...Yeah, lol I like it!!! 

Thank you Gamera.

Peter

  • Member since
    January 2018
Posted by PeterPan on Friday, April 20, 2018 5:38 PM

Tanker - Builder

OOPS !

Looks like someone fell on their Bum and are going to do the " foot wettin slide !" Lol.Lol.Lol. Very nice Peter !

Thanks for your response and Lols.

Peter

  • Member since
    January 2018
Posted by PeterPan on Friday, April 20, 2018 5:35 PM

Panzer Joe

Cool nice bridge!

Thank you for complement.

Peter

  • Member since
    July 2014
Posted by modelcrazy on Friday, April 20, 2018 11:35 AM

Fighting a giant squid

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Friday, April 20, 2018 11:34 AM

Tanker - Builder

OOPS !

Looks like someone fell on their Bum and are going to do the " foot wettin slide !" Lol.Lol.Lol. Very nice Peter !

 

Yeah, lol I like it!!! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2014
  • From: New Braunfels , Texas
Posted by Tanker - Builder on Friday, April 20, 2018 11:31 AM

OOPS !

Looks like someone fell on their Bum and are going to do the " foot wettin slide !" Lol.Lol.Lol. Very nice Peter !

  • Member since
    April 2018
  • From: Australia
Posted by Panzer Joe on Friday, April 20, 2018 4:51 AM

Cool nice bridge!

  • Member since
    January 2018
Posted by PeterPan on Friday, April 20, 2018 4:50 AM

Looks like nobody saw the funny side to the above post.

____________________________

Added the remaining fender piers.

Peter

  • Member since
    January 2018
Posted by PeterPan on Monday, April 16, 2018 4:43 PM

Putting a mini-diorama together.

 

 

 

 

 

 

 

 

Peter

  • Member since
    January 2018
Posted by PeterPan on Monday, April 16, 2018 4:32 PM

mmthrax
I love it!  Really cool stuff !Yes

Yes

Peter

  • Member since
    December 2017
  • From: Plano (Dallas), Texas
Posted by mmthrax on Monday, April 16, 2018 1:45 PM

I love it!  Really cool stuff !Yes

Just keep picking away at it...

  • Member since
    January 2018
Posted by PeterPan on Saturday, April 14, 2018 4:49 AM

Some of the crew need to go ashore to attach a cable between old buoy and the crane.

To do this they need a dinghy, a rubber dinghy with a small outboard motor.

 

Peter

  • Member since
    January 2018
Posted by PeterPan on Friday, April 13, 2018 5:18 PM

mmthrax

...I would have probably painted the guys shirt on, then tried to paint the vest etc, and it would have been a disaster....

Thanks for kind words.

In regards to the quote above, I do not see it that way. I use enamel paint and they are quite opaque. I have painted light colours over dark, like the orange vest over blue shirt, or white strip over orange vest, without problems.

My hands are not as steady as the used to be, and I often have to do a touch up here and there. For example, where the vest goes over the shoulder. I may get too much blue there, and after a few hours of drying, I go back with the orange and cover the excess blue.

I do not know how acrylic paints, for modelling, show up.

Peter

  • Member since
    December 2017
  • From: Plano (Dallas), Texas
Posted by mmthrax on Friday, April 13, 2018 11:58 AM

Here's another thing I appreciate about this build.  The "in process" shots.

The "in process" shots of the figurines in particular are interesting to me because of the order in which the clothing was painted.  Peter, you either have an innate "correct order" skill, or perhaps you read it in a book somewhere.  My brain doesn't automatically work that way.  I am trying to train it.  I would have probably painted the guys shirt on, then tried to paint the vest etc, and it would have been a disaster.

Quality work sir.  Carry on.

 

Just keep picking away at it...

  • Member since
    January 2018
Posted by PeterPan on Thursday, April 12, 2018 9:26 PM

Went back to the Buoy Boat. It needs to be completed and fixed in place in the river. Besides adding the crane and new buoy to the boat, other tidbits are also needed.

Gave the boat a few coats of paint.

 

Preparing a few figurines.

 

Peter

  • Member since
    January 2018
Posted by PeterPan on Thursday, April 12, 2018 9:17 PM

Gamera

Looking just flat out amazing!!! 

Thank you Gamera.

Peter

  • Member since
    January 2018
Posted by PeterPan on Thursday, April 12, 2018 9:15 PM

Tanker - Builder

Holy Chit !

 Did you build it on your workshop Bench ? Now what are you gonna do fer a bench ? Peter , that is certainly an ambitious project and I laud your efforts . Now ,can you tell me where to get a " Turbo Toro " Lawnmower . Nicely done .

 Anytime you want a break come to New Braunfels  you can work in our Museum .

Thank you for great compliment.

The display is on two wooden horses in the centre of the lounge-dining room. For over a year I have been eating from my workbench.

Peter

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, April 12, 2018 11:13 AM

Looking just flat out amazing!!! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    June 2014
  • From: New Braunfels , Texas
Posted by Tanker - Builder on Thursday, April 12, 2018 10:03 AM

Holy Chit !

 Did you build it on your workshop Bench ? Now what are you gonna do fer a bench ? Peter , that is certainly an ambitious project and I laud your efforts . Now ,can you tell me where to get a " Turbo Toro " Lawnmower . Nicely done .

 Anytime you want a break come to New Braunfels  you can work in our Museum .

  • Member since
    January 2018
Posted by PeterPan on Wednesday, April 11, 2018 3:50 PM

It has come to my attention that there has not been any photographs lately of the whole diorama. To do so is difficult, for I have other stuff in the way. I have to cram myself into a corner with the camera above my head to take the shot.

Have taken other view shots which looks across the diorama.

Peter

  • Member since
    January 2018
Posted by PeterPan on Wednesday, April 11, 2018 3:44 PM

[/quote]te user="Greg"]

I just discovered this and it is amazing.

 

[/quote]

Thank you Greg.

Peter

  • Member since
    January 2018
Posted by PeterPan on Wednesday, April 11, 2018 3:43 PM

mmthrax

I love that.  That is greatness!  Looks like a "Turbo Toro".  Love it in situ.

Great work sir!

And thanks for your comment.  

 

Thank you Mark.

Peter

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Monday, April 9, 2018 8:57 PM

I just discovered this and it is amazing.

  • Member since
    December 2017
  • From: Plano (Dallas), Texas
Posted by mmthrax on Monday, April 9, 2018 8:52 PM

I love that.  That is greatness!  Looks like a "Turbo Toro".  Love it in situ.

Great work sir!

And thanks for your comment.  

Just keep picking away at it...

  • Member since
    January 2018
Posted by PeterPan on Monday, April 9, 2018 6:48 PM

Well, the lawn was too large for an ordinary lawn mower, so George went a bought a Whopper. Now he can cut twice as much in one sweep.Big Smile

 

 

Peter

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.