SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/32 Tamiya P-51D Mustang - Petie 2nd - J.C. Meyer (Complete!)

8709 views
33 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 3:19 PM

7474
Fantastic job. I’ll have to look to see what paints you used for the wings.
 



Thanks 74!  For the lacquer part of the wings I used Mission Models Silver with Model Master Flat clear lacquer. I used Duraluminum for the ammo bays. Chrome and Model Master semigloss clear lacqer was used for the control surfaces. Base was grey primer and gloss for decals and wash was Tamiya X22. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 3:10 PM

GAF

Beautiful work, Hoss!  As you can tell by my avatar, I'm a big fan of the blue nosed Mustangs!

Gary

 

Nice! Thanks Gary. I just recently learned about these guys when I read about Operation Bodenplatte last year. What a great scheme. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 3:04 PM

Aggieman

Having built that kit myself, I'll just say you did a fantastic job, especially considering all those firsts you mentioned.

Great photographs as well.

 

Thanks. It truly is a great kit. I'm looking forward to my 1/32 Tamiya Spitfire IXc in my stash. I've had my eye on the Corsair too, but I haven't turned my attention to the Pacific theater yet. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 3:01 PM

sickdude
Wowie, wow wow! Perfection in every cense of the word, wonderful job sir Yes.
 

Thanks sickdude! 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 3:00 PM

DRUMS01

WOW and WOW! 

I second every positive thing thats already been said. 

You should be proud of your results as they are second to none.

Ben

 



Thanks Ben!

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 3:00 PM

JacknewbIII

Wow! Tamiya should buy some of those pics for their box photos! I don't think it can be done any better than this.G base and beautiful 51!

 

Thanks Jack! Much appreciated!

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 1:58 PM

familyman

As my 1980's self would have said, wicked awesome!

I thought the first 4 completed pics were of the real life plane.Bow Down

 

Thanks familyman!  Much appreciated. I like to take a few photos of each model from an eye level perspective in a realistic setting. 

  • Member since
    May 2006
  • From: Chapin, South Carolina
Posted by Shipwreck on Tuesday, March 10, 2020 1:58 PM

Hoss, you did a real good job on that P-51. The 1/32 Tamiya kit sure has some fine detail to work with!

On the Bench:

Revell 1/96 USS Constitution - rigging

Revell 1/48 B-1B Lancer Prep and research

Trumpeter 1/350 USS Hornet CV-8 Prep and research

 

 

 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 1:55 PM

jeaton01

Simply outstanding!

 

Thanks jeaton!

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 1:53 PM

lawdog114

Perfection...

 

Thanks LD! 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 10, 2020 1:53 PM

Greg

Excellent workmanship. YesYesYes

Ditto on your photography and presentation. YesYesYes

Everything I can see looks just right. Nothing seems under or over-done. If a thread ever made me want to go out and buy a kit, this one surely does.

 

Thanks Greg! I highly recommend the kit. 

  • Member since
    December 2002
Posted by 7474 on Monday, March 9, 2020 10:24 AM
Fantastic job. I’ll have to look to see what paints you used for the wings.
GAF
  • Member since
    June 2012
  • From: Anniston, AL
Posted by GAF on Monday, March 9, 2020 7:40 AM

Beautiful work, Hoss!  As you can tell by my avatar, I'm a big fan of the blue nosed Mustangs!

Gary

  • Member since
    January 2015
  • From: Katy, TX
Posted by Aggieman on Sunday, March 8, 2020 5:21 PM

Having built that kit myself, I'll just say you did a fantastic job, especially considering all those firsts you mentioned.

Great photographs as well.

  • Member since
    November 2018
  • From: Saskatchewan, Canada
Posted by sickdude on Sunday, March 8, 2020 4:49 PM
Wowie, wow wow! Perfection in every cense of the word, wonderful job sir Yes.

William (Willy)

 
  • Member since
    June 2018
  • From: Ohio (USA)
Posted by DRUMS01 on Sunday, March 8, 2020 1:02 PM

WOW and WOW! 

I second every positive thing thats already been said. 

You should be proud of your results as they are second to none.

Ben

"Everyones the normal until you get to know them" (Unknown)

LAST COMPLETED:

1/35 Churchill Mk IV AVRE with bridge - DONE

NEXT PROJECT:

1/35 CH-54A Tarhe Helicopter

 

  • Member since
    October 2009
Posted by JacknewbIII on Sunday, March 8, 2020 9:40 AM

Wow! Tamiya should buy some of those pics for their box photos! I don't think it can be done any better than this.G base and beautiful 51!

  • Member since
    October 2018
Posted by familyman on Sunday, March 8, 2020 7:56 AM

As my 1980's self would have said, wicked awesome!

I thought the first 4 completed pics were of the real life plane.Bow Down

Mike

"An honest man's pillow is his peace of mind"

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Sunday, March 8, 2020 12:07 AM

Simply outstanding!

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Saturday, March 7, 2020 9:25 PM

Perfection...

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Saturday, March 7, 2020 6:50 PM

Excellent workmanship. YesYesYes

Ditto on your photography and presentation. YesYesYes

Everything I can see looks just right. Nothing seems under or over-done. If a thread ever made me want to go out and buy a kit, this one surely does.

  • Member since
    July 2019
Posted by Hoss WA on Saturday, March 7, 2020 6:43 PM

Petie 2nd is now complete. 

After the gloss coat with Tamiya X-22/MCLT, the decals went on mostly without a hitch. After doing some research online, my understanding is that Mr. Mark Setter and Softer are formulated to work with Tamiya decals.  So I decided to try the ones with the kit. It actually worked much better than Microsol and MicroSet on Tamiya decals. They conformed to rivets and panel lines and were very thin when dry. Mr. Mark Softer is pretty hot so I diluted it 50% with water and was able to control it better. 

A black and dark dirt Flory wash was next, followed by some other minor weathering. I used Model Master semi gloss clear lacquer on the fuselage and metal control surfaces and Model Master Flat clear lacquer on the painted wing areas. 

The extra options (landing gear deployed/retracted, ammo and gun bays, engine, movable control surfaces, etc.) took quite a bit of time, but it was interesting swapping configurations around when complete. However, I don't plan to change poses and configurations at all when it's in the display case. 

Overall, I enjoyed the kit and was impressed with the engineering, fit and overall excellence of the experience. There were a number of firsts for me on this kit:

- first 1/32 Tamiya kit - It won't be my last, but I'm not going to build every option in the universe again.

- first metal finish - I think it turned out ok but I've seen some photos on this forum that are amazing. And I really think the 352 FG blue nose scheme is spectacular. 

- first P-51 Mustang model

- first time "wiring" an engine

It's wrap. Enjoy the photos and thanks for following along. 

 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 3, 2020 6:11 PM

lawdog114
Outstanding work. I was unaware Mission had a metal line. Is it durable?
 

Thanks LD!

To be honest, Mission Models are the only metals I've used, so I don't have a good basis for comparison. However, they seem to be just as durable as any of the other MM paints. I haven't had any issues with masking or unusual scratching. I apply them over primer just like the other paints. They are fairly translucent so you have to build the metal effect layer by layer and let dry between coats. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, March 3, 2020 5:46 PM

sickdude
I say it on scalemates, and i'll say it again, simply wonderful work sir! Your painting looks very realistic, well done!
 

Thanks sickdude! I'm happy with how the different metal sections came out. Decals and more weathering is the next challenge. 

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Monday, March 2, 2020 10:21 PM
Outstanding work. I was unaware Mission had a metal line. Is it durable?

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

  • Member since
    November 2018
  • From: Saskatchewan, Canada
Posted by sickdude on Sunday, March 1, 2020 9:15 PM
I say it on scalemates, and i'll say it again, simply wonderful work sir! Your painting looks very realistic, well done!

William (Willy)

 
  • Member since
    July 2019
Posted by Hoss WA on Sunday, March 1, 2020 6:59 PM

Main build and painting is complete. There were absolutely no major issues with the main build. The wings and fuselage fit was PERFECT. As a minor issue, I would echo Lawdog's comments that the fit of the cowl panels is a little sketchy. The panels don't quite line up, and some fiddling is needed to get them to look reasonable, particularly on the starboard side. The port side fit was fine. 

After main assembly I masked the canopy by using one of the unused alternate canopies and applying white tack as "weather stripping" inside. 

It was then primed with Mission Models Grey primer and sanded smooth with micromesh pads. I attached and held the removable panels with blue tack. 

A combination of Mission Models metaliics was used for the main painting. Chrome was the main color for the fuselage natural metal finish, control surfaces and selected panels on the underside of the wings. Silver was applied to the wings to represent the aluminum lacquer paint. Duraluminum, Dark Aluminum and White Aluminum were applied to selected panels to reflect the slight variations seen on the actual aircraft. 

The Mission Models metallics were very robust, quick drying and held up very well to masking. They need to be applied in very light wet coats for best results. It's easy to blob on sections that are too thick because the paint is very thin.  However, it's forgiving because the paint is fairly translucent. 

Mission Models also has a gloss black base that's designed to be used with the chrome to provide a very reflective and smooth chrome finish. I purchased some and ran a bunch of tests, but I didn't feel confident in being able to get good results at game time. More practice required before going live. In any event, I didn't think the model needed a mirror finish as seen on some restored aircraft, but a few panels here and there could add some pop.  

A mix of Tamiya X-14 Sky Blue and and XF-8 Flat Blue were used for the blue nose, per the instructions. I added some white and did a little fading on the top cowling for some variation. The nose was masked with Tamiya flexible tape. Gloss coat and decals are next. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, February 18, 2020 9:10 PM

sickdude
Simply amazing build sir! The amount of engineering and detail in modern kits is simply astounding! Basically building a miniaturized version of the full size plane. Great stuff! :)
 

Thanks sickdude! I continue to be impressed with the detail and thought that went into this kit. It's a real marvel. 

  • Member since
    November 2018
  • From: Saskatchewan, Canada
Posted by sickdude on Monday, February 17, 2020 9:15 PM
Simply amazing build sir! The amount of engineering and detail in modern kits is simply astounding! Basically building a miniaturized version of the full size plane. Great stuff! :)

William (Willy)

 
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.