SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1/32 Tamiya F4U-1A Corsair - Pappy Boyington - 17883 (Complete)

10947 views
92 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Monday, November 29, 2021 3:22 PM

Beautiful work Nikola. Masterful cockpit and engine. Impressive.

On the Bench: Too Much

  • Member since
    September 2019
  • From: Belgrade, Serbia
Posted by Nikola on Monday, November 29, 2021 3:57 PM

cbaltrin

Beautiful work Nikola. Masterful cockpit and engine. Impressive.

 

Ah, I wish that this beauty was mine but it is Hoss who deserves all the praise. :)

            www.shelfforce.com

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, November 29, 2021 10:22 PM

Magnificent job Hoss!!!

The weathering, wear, and fading look perfect!!!

Heart

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, November 30, 2021 12:01 AM

A masterpiece.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 6:47 PM

Aggieman

Beautiful Corsair.

 

Thanks Aggieman - much appreciated. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 6:54 PM

scottrc

Thank you for such an informative thread.  The paint formulas you posted help a lot.  Fantastic work!

 

Thanks Scott. Glad the paint formulas help. They may at least save you some time. The real challenge for me was getting the various tones correct in relation to each other. I found some excellent reference photos of Corsairs in theater that showed the variation of fading across the different sections of the airframe and tried to match them. In addition, I was surprised at how different the colors were between MRP and Mr. Color paints. MRP was "spot on" vs. the photos and Mr. Color was way off, especially on the Sea Blue. I'm thinking that the AK Real Colors are probably pretty close but didn't try them. It was certainly a fun paintjob. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 6:57 PM

disastermaster

                                                    http://www.webweaver.nu/clipart/img/entertainment/video/photographer.gif

 I have to say that this masterpiece is just beyond magnificent. Not only are you a model builder but an artist and a first rate researcher in respect to detailed modeling. It really can't get much better than this.

  Those images are far above inspiring. Please keep the pictures up on this thread because I am bookmarking it for future reference.

 I look foward to your next subject adventure as I assume you will somehow manage to top this.

                                               :gobsmacked:

 

 

Thanks for the kind comments, disastermaster. They are really appreciated and I'm glad you like the result. I must say that this Tamiya kit is absolutely superb if you haven't tackled it yet. The paint adventure was a challenge and I'm happy with how it turned out. Thanks again!  

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 6:57 PM

Greg

Outstanding work, Hoss. YesYesYes

Thank you for this WIP thread.

 

 

Thanks Greg!  

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 7:15 PM

wpwar11

Outstanding!  Besides the pencils what other technique was used for chipping?  I ask because I like hairspray chipping but I'm concerned about tape pulling up paint when I spray the upper wing insignia.

 

Thanks wpwar! Much appreciated. My chipping approach was as follows:

  • On the wing root areas:
  • Painted the bare plastic with Mr Color Silver C8. 
  • Applied AK worn effects fluid
  • Painted with Mr. Color Yellow chromate primer (I forget the number)
  • Chipped with stiff brush and a little water in the high wear areas. The plane was only couple of weeks in theater as depicted so I didn't go too heavy here. 
  • Sanded surface with Micromesh pads 6000/8000
  • Applied a gloss coat. Mr. Color GX100.
  • Applied AK work effects fluid again. 
  • Painted the main colors. 
  • Chipped with stiff brush and water. 
  • Applied gloss coat. 
  • Note that the surface was still very prone to chipping afterwards when I was using masking tape. I suggest "desticking" the masking tape by taping to your arm or hand a few times before applying to this area and lift slowly and carefully. However, if you lift some paint, I think it's OK to just paint it over again with the base color. 
  • The rest of the chipping was using colored pencils - gray, light blue, medium blue and silver. 
  • On the prop:
  • Sprayed the whole prop with C8 silver
  • Applied AK chipping fluid
  • Painted MRP black
  • Chipped very lightly with water and stiff brush - mostly on leading edges and rear tip areas. 
  • Gloss coat & decals
  • Relatively heavy gloss coat to cover the decal edges. 
  • Micromesh 6000/8000
  • Flat coat. 
  • Sponge chipping with Tamiya XF56
  • Silver pencil
  • Everywhere else:
  • Sponge chipping with Tamiya XF56
  • Pencils with blues, grays, silver. 

Hope that helps and thanks again! I'm looking forward to seeing your Corsair roll out of the hangar. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 7:16 PM

cbaltrin

Beautiful work Nikola. Masterful cockpit and engine. Impressive.

 

Thanks! I see that Nikola addressed the mistaken identity below. Thanks again. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 7:17 PM

Nikola

 

 
cbaltrin

Beautiful work Nikola. Masterful cockpit and engine. Impressive.

 

 

 

Ah, I wish that this beauty was mine but it is Hoss who deserves all the praise. :)

 

 

Thanks Nikola! Much appreciated. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 7:18 PM

Gamera

Magnificent job Hoss!!!

The weathering, wear, and fading look perfect!!!

Heart

 

 

Thanks Gamera! Much appreciated. This was a fun project and I'm glad you like it. 

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, November 30, 2021 7:18 PM

jeaton01

A masterpiece.

 

Thanks John! Much appreciated. 

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Tuesday, November 30, 2021 7:23 PM

Hoss WA

 

 
Nikola

 

 
cbaltrin

Beautiful work Nikola. Masterful cockpit and engine. Impressive.

 

 

 

Ah, I wish that this beauty was mine but it is Hoss who deserves all the praise. :)

 

 

 

 

Thanks Nikola! Much appreciated. 

 

Oops! Sorry Hoss! GREAT WORK!

On the Bench: Too Much

  • Member since
    February 2006
  • From: Boston
Posted by Wilbur Wright on Tuesday, November 30, 2021 10:40 PM

Beautiful paint job, and modulation of colors. Stunning.

  • Member since
    July 2019
Posted by Hoss WA on Wednesday, December 8, 2021 6:16 PM

Wilbur Wright

Beautiful paint job, and modulation of colors. Stunning.

 

Thanks Wilbur. Much appreciated. 

  • Member since
    January 2020
  • From: Maryland
Posted by wpwar11 on Wednesday, December 8, 2021 6:38 PM

Hoss WA

 

 
wpwar11

Outstanding!  Besides the pencils what other technique was used for chipping?  I ask because I like hairspray chipping but I'm concerned about tape pulling up paint when I spray the upper wing insignia.

 

 

 

Thanks wpwar! Much appreciated. My chipping approach was as follows:

  • On the wing root areas:
  • Painted the bare plastic with Mr Color Silver C8. 
  • Applied AK worn effects fluid
  • Painted with Mr. Color Yellow chromate primer (I forget the number)
  • Chipped with stiff brush and a little water in the high wear areas. The plane was only couple of weeks in theater as depicted so I didn't go too heavy here. 
  • Sanded surface with Micromesh pads 6000/8000
  • Applied a gloss coat. Mr. Color GX100.
  • Applied AK work effects fluid again. 
  • Painted the main colors. 
  • Chipped with stiff brush and water. 
  • Applied gloss coat. 
  • Note that the surface was still very prone to chipping afterwards when I was using masking tape. I suggest "desticking" the masking tape by taping to your arm or hand a few times before applying to this area and lift slowly and carefully. However, if you lift some paint, I think it's OK to just paint it over again with the base color. 
  • The rest of the chipping was using colored pencils - gray, light blue, medium blue and silver. 
  • On the prop:
  • Sprayed the whole prop with C8 silver
  • Applied AK chipping fluid
  • Painted MRP black
  • Chipped very lightly with water and stiff brush - mostly on leading edges and rear tip areas. 
  • Gloss coat & decals
  • Relatively heavy gloss coat to cover the decal edges. 
  • Micromesh 6000/8000
  • Flat coat. 
  • Sponge chipping with Tamiya XF56
  • Silver pencil
  • Everywhere else:
  • Sponge chipping with Tamiya XF56
  • Pencils with blues, grays, silver. 

Hope that helps and thanks again! I'm looking forward to seeing your Corsair roll out of the hangar. 

 

Thanks for the detailed answer.  Yes this is a big help.

  • Member since
    March 2003
Posted by rangerj on Thursday, December 9, 2021 12:46 PM

WOW. That is a great tribute to Pappy. I worked with a WWII Marine who was a Medal of Honor (MOH) recipient. He was in Washington on the same day as Pappy and they were both getting their medal put on them by the president. Well Pappy was drinking heavily in those days and he went out the night before and got very drunk. My friend and another Marine were ordered to go find Pappy and get him to the President. They found him and had to hold him up to receive his MOH from the President. Pappy said on more than one occassion that if they (the government) knew he was still alive he would never have been awarded the MOH. He was found in a Japanese prisoner of war camp after the war ended and it was not known that he was alive when the MOH was approved. USMC Major Boyington, like many combat veterans, suffer from drug and/or alcohal abuse. Your fine tribute to Pappy is well deserved and appreciated.     

  • Member since
    July 2019
Posted by Hoss WA on Friday, December 17, 2021 3:12 PM

rangerj

WOW. That is a great tribute to Pappy. I worked with a WWII Marine who was a Medal of Honor (MOH) recipient. He was in Washington on the same day as Pappy and they were both getting their medal put on them by the president. Well Pappy was drinking heavily in those days and he went out the night before and got very drunk. My friend and another Marine were ordered to go find Pappy and get him to the President. They found him and had to hold him up to receive his MOH from the President. Pappy said on more than one occassion that if they (the government) knew he was still alive he would never have been awarded the MOH. He was found in a Japanese prisoner of war camp after the war ended and it was not known that he was alive when the MOH was approved. USMC Major Boyington, like many combat veterans, suffer from drug and/or alcohal abuse. Your fine tribute to Pappy is well deserved and appreciated.     

 

 

Thanks Rangerj! Thanks also for sharing that story. The history and personal stories are parts of this hobby that I love the most. Honoring those who served and sacrificed for their country is a pleasure. Thanks again. 

  • Member since
    August 2021
Posted by lurch on Thursday, December 23, 2021 1:38 PM

That is a beutiful piece of work you did.

  • Member since
    February 2012
  • From: Olmsted Township, Ohio
Posted by lawdog114 on Friday, December 31, 2021 4:29 AM

Probably your best work to date Hoss. How do you like that GX 100? I'm thinking about giving that a try.

 "Can you fly this plane and land it?...Surely you can't be serious....I am serious, and don't call me Shirley"

 

 

 

 

  • Member since
    January 2003
  • From: Washington State
Posted by leemitcheltree on Monday, January 3, 2022 6:09 PM

Oh, dude!
That thing....is AMAZING!
Awesome work!!!!
You must be happy with that!
I'm happy just looking at the pics.

Thanks for sharing, mate!!!!!

Cheers, LeeTree
Remember, Safety Fast!!!

  • Member since
    February 2021
Posted by MJY65 on Monday, January 3, 2022 6:43 PM

I have that kit in my stash, but now I feel like my skills are totally inadequate to complete it.  Smile

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, January 4, 2022 6:12 PM

lurch

That is a beutiful piece of work you did.

 

Thanks lurch!

  • Member since
    July 2019
Posted by Hoss WA on Tuesday, January 4, 2022 6:16 PM

lawdog114

Probably your best work to date Hoss. How do you like that GX 100? I'm thinking about giving that a try.

 

Thanks LD - Very much appreciated. This was a fun paint job but it took me a while to get the courage to attempt it. Thanks again. 

Regarding GX 100, I really like it. It dries much faster than Tamiya X-22/MCLT and seems to be more resistant to fingerprints. I don't add a final coat of MCLT because the testing I did showed no real difference in the finish than not adding it. Very smooth and thin.  I'd recommend trying it out. 

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Thursday, January 6, 2022 10:16 AM

WOW!! What a beautiful aircraft model. You really nailed the engine and the paint job.

Your comments and questions are always welcome.

  • Member since
    July 2019
Posted by Hoss WA on Thursday, January 13, 2022 5:45 PM

JohnnyK

WOW!! What a beautiful aircraft model. You really nailed the engine and the paint job.

 

Thanks Johnny! Much appreciated. 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Thursday, January 13, 2022 5:59 PM

Really like the faded paint job.  Fantastic.

Thanks,

John

  • Member since
    February 2005
Posted by marcopreto on Friday, January 14, 2022 5:23 AM

Bow Down

 

Brilliant!

 

Cheers

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Friday, January 14, 2022 8:21 AM

simply awesomeToast  

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.