SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Monogram Mafia IV Group Build

50017 views
1009 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2012
Posted by GMorrison on Thursday, August 2, 2018 10:43 PM

For the Don's consideration, I have a Beech Staggerwing kit from AMT that was slipped to me for deep discount at the LHS. Round2 reissue.

I've been working on 30s aircraft, might be fun.

 Modeling is an excuse to buy books.

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, August 2, 2018 10:39 PM

Thank you 68.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    February 2010
  • From: New Jersey
Posted by 68GT on Thursday, August 2, 2018 9:45 PM

The P-40 is looking real nice Stik

On Ed's bench, ???

  

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, August 2, 2018 9:28 PM

Flat coat airbrushed on today... 

 

 

 

Now I just need to add the final parts and weathering....

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, July 31, 2018 9:51 PM

Thank you sir. I intend to have this all wrapped up by the end of the week... so close now!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2014
Posted by modelcrazy on Tuesday, July 31, 2018 9:38 PM

It's really looking good Stick

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, July 31, 2018 9:27 PM

I’ve been working on the final touches on this project. On Sunday I added the propeller, main landing gear struts, belly tank, and a strip of tissue paper in the tail wheel well to represent the canvas boot many P-40s had in there... and cover up the seam... I took these photos yesterday

 

 

 

This morning before work I painted the tires and tail wheel well boot... but no photos yet. All ready for the final bits now...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Wednesday, July 25, 2018 7:12 PM

Sounds good Tony! We can both post some updates this weekend.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Wednesday, July 25, 2018 7:04 PM

Thanks Stik. I'll take that liberty. I've progressed on the cleanup of parts, but still no paint. Maybe this weekend.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Monday, July 23, 2018 9:37 PM

No worries about the deadline Tony. Mine is now 19 days past due. Life happens. Not that I show off GB badges anymore anyways.

Just build your project and share your work with us here, whether you’re on deadline or not. 

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    April 2005
  • From: Australia
Posted by taxtp on Monday, July 23, 2018 9:29 PM

Apologies for not commenting on the models in your posts, I can't open the links when I'm at work. I'll have another look from home later.

I've realised that I'm only a couple of weeks out from the deadline for my 2nd build, so I've started the other Monogram Ultimates 1/43 kit, the 1967 Corvette. The body is ready to prime.

Cheers

Tony

I'm just taking it one GB at a time.

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, July 22, 2018 2:56 PM

Lots of little progress bits this weeeknd pushing me close to the finish line

 

All sub assemblies and parts painted except for the tires...

 

 

Then I began panel line washes on the upper and lower surfaces

 

 

 

And lastly I glued the exhausts to the engine access panels, and glued those into place...

 

 

Getting closer now...

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, July 22, 2018 1:05 AM

Thanks SB. I knew of the 57th FG when I started this project, but the research led me to know about them. Very enlightening and inspiring to learn about this group and their role in 1942 when all hung in the balance. 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    February 2014
  • From: Michigan
Posted by silentbob33 on Saturday, July 21, 2018 10:31 PM
Great work Stik! I love all the research you put into this project, that's half the fun for me.

On my bench: Academy 1/35 UH-60L Black Hawk

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Saturday, July 21, 2018 1:42 AM

Thank you Bob. I think that the solid sand desert scheme is the most attractive one that the P-40 wore.

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    November 2003
  • From: Nashville, TN area
Posted by bobbaily on Friday, July 20, 2018 6:40 PM

Looks good Stik-especially on the desert scheme paint

Bob

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Thursday, July 19, 2018 11:41 PM

MC, I agree. I think that the artist took some liberties off that photo. 

 

Anyways, back to my 57th FG P-40F... I found a better scan job of the reference photo of “offset” 53, and let’s just say, there just might be traces of a yellow serial number obscured under dust... after all look at the blue of the star on the fuselage. So I opted to add the serial number in some very old decals that I had in my stash. Thank goodness for Microscale Decal Film to revive them... they are at least 40 years old. So I did them as if the tri color flash covered one half on each side... serial number 41 13921. On most USAAF aircraft the first digit of the number was omitted when they were painted on the tail.

 

 

 

And in B&W to show the low contrast between the base color and the yellow serial

 

 

 

I also decided to add the name on the cowling... as well as the aircraft info stencil taken from a sheet in my spares...

 

 

and the propellor blade stencil info  from that same sheet...

 

more to come in a day or two...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2014
Posted by modelcrazy on Thursday, July 19, 2018 7:52 PM

Quite the research Stick. I don't see any demarcation line for the light gray underside in either photo like is shown on the decal instructions. Admittedly the upper photo is hard to tell.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Wednesday, July 18, 2018 6:27 PM

And now for another semi long explanatory post on the markings...

 

The kit decals appear to be based off of this profile

 

 

which appears to be based off of this photo, 

 

 

which both came from a book that is nearly as old as I am. Now in the photo, the spinner is not visible, but I would say highly improbable. Mainly for the reasons that I stated in my previous post, and also because white was the Axis theater ID color used on their fighters at that time in North Africa. Also, the black serial number on the rudder is not visible in the photo. Although it is possible for a yellow one to be there, but obscured by dust. Now as far as a name on the engine access panel, maybe yes, maybe no, based off of the photo. I checked on Joe Baughers website, and for the serial number given, that airframe was not written off until 1944. So I surmise that it would have recieved the red spinner, and later the RAF trio color fin flash. Now I did find a couple other photos of a 57th FG P-40 coded 53 that did have those ID markings. BUT... I believe it is a different airframe due to the difference in placement of the 3 and the condition of the fuselage stars between the two. My assessment is that the second photo is a replacement aircraft later in the campaign, or has had a major repair in the tail area (less likely).

 

 

Anyways, I opted to mark mine as the top photo aircraft, with the offset 3, but with markings as it should have looked later in the campaign.

 

 

 

I am still pondering whether or not if I should add the name and some yellow serial numbers...

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, July 17, 2018 9:28 PM

MC and CB, thank you. But it has a ways to go yet...

Well last nite after work I began to apply decals. Now before we get to showing any of that, let me explain what’s ahead with the markings and how I got there. I am making a P-40F from the 57th Fighter Group in the Western Desert in late summer/autumn of 1942. The 57th received new P-40Fs that had the topside OD covered in Desert Sand/Desert Pink at the factory. The spinner was also Sand at this time. Markings were minimal when they were loaded aboard USS Ranger for shipment to Africa. Stars in the four position, US ARMY on the undersurface of the wings, red plane in group numbers on the sides of the chin scoop, and yellow serial numbers on the tail. A few aircraft had names on the nose and/or artwork on the rudder.

 

 

After launching from Ranger off West Africa, then flying in hops until they arrived in Palestine to begin training with the RAF before entering combat, they still had this appearance. Prior to beginning combat orientation flights with the RAF, theater ID markings such as the Red spinner, as were larger white plane in group numbers added straddling the fuselage stars. The original nose plane in group numbers appear to have been painted over

 

 

Later, an RAF style red, white, and blue fin flash was added

 

 

so now you have an idea of where I’m heading and why...

 

But for now, the lower surface star and US ARMY

 

 

I applied most of the rest of the markings today before work, but I did not have time to take photos, so you’ll have to wait for those till morning...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    May 2004
  • From: Land of Lakes
Posted by cbaltrin on Tuesday, July 17, 2018 11:27 AM

Looks fabulous Stik! 

On the Bench: Too Much

  • Member since
    July 2014
Posted by modelcrazy on Monday, July 16, 2018 8:10 AM

Looks great Stick

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Sunday, July 15, 2018 9:55 PM

Well, my days off were filled with things that kept me from my work bench as much as I preferred. I did get my final touch ups of the Desert Pink/Neutral Gray right finally. And I mixed up the red for the spinner, plus painting the propeller blades first the yellow, then masking the tips for the black... lastly I airbrushed on a coat of Future. But I think that upper surfaces need another dose before I apply decals...

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Saturday, July 7, 2018 2:26 PM

But the OD is only a base coat for the Desert Pink. Which I airbrushed on this morning. Warm air temps and low humidity made the surface a bit on the gritty side, but overall I think that it looks just right. 

 

 

I need to go back now and touch up the demarcation lines with Neutral Gray. The Tamiya pigments are more fine, so I can get a tighter line and spray pattern. Especially if I dial down the air pressure. 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Saturday, July 7, 2018 12:02 AM

Now that it has dropped down into the mid 80’s, after topping out at around 105* or so, I was able to get in another airbrush session. 5 parts Tamiya OD to 2 parts Tamiya Khaki, thinned with lacquer thinner.

 

 

I’ll let this dry and cure overnite, and hopefully tomorrow do a topcoat of the Polly S Desert Pink over the OD. It’s supposed to be about 10* cooler tomorrow and should not break 100*

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, July 6, 2018 8:46 PM

MC, you can see where I dinged up the edges of the #2 stack on each side. But not too badly... it always happens. For this reason for me, AM seats and Exhausts are a good investment...  

Wink

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2014
Posted by modelcrazy on Friday, July 6, 2018 7:23 PM

Nice job on the stacks Stick. I can't get that thin without drilling through the sides.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, July 6, 2018 3:56 PM

 

Well, today was detail work in preparation for painting. I masked off the canopy parts and then glued them into place

 

 

Then I drilled out the exhaust stacks...

 

 

 

 

and then some more drill work on the gun muzzles

 

 

 

and that was it for now... the air temperature in my work area was approaching 100*, so it was time to go into the house where it is cooler... perhaps this evening I can get some paint on when it cools down and the sun sets...

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, July 6, 2018 12:19 AM

Bob, thank you.

 

MC, I would do some serious harm to get some more of the Floquil blacks,,, faded, scale, etc... 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    July 2014
Posted by modelcrazy on Thursday, July 5, 2018 9:22 PM

Here's what's left of my little solders.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.