SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Ships of the German Flag GB 2020

28334 views
502 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2014
Posted by modelcrazy on Tuesday, September 15, 2020 7:23 AM

Good start on the Kornprinz Marcus.

Dodgy I have it down.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Tuesday, September 15, 2020 3:43 AM

The U-99 kit is 125th, the Advent kit is a re-box of the Revell. I built that a few years back as a practice for the 72nd kit.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Tuesday, September 15, 2020 2:51 AM

Thanks Goldhammer, I haven't seen them in a few years and for some reason I thought they were 1/72. Don't know why. Put it down to old age and too many glue fumes............. Its good though, for the two builds I have commited to, I'm using whats in the stash. The wife is happy!

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    August 2014
  • From: Willamette Valley, Oregon
Posted by goldhammer on Monday, September 14, 2020 9:13 PM

Sounds like they are in the neighborhood of 1/144.

Gatos were about 100 ft longer, and at that scale are about 24 inches

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Monday, September 14, 2020 9:08 PM

The old Revell kit out of the Ark. The U47 cutaway version.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Monday, September 14, 2020 9:03 PM

Sorry, you are absolutely correct on the Emden. I actually have two U Boats, both are Revell, although one is an Advent marked kit. The Advent kit is listed as U99. The Revell marked kit is U47 and is the cutaway version. Neither kit has a scale and both are advertised as being 21 inches long. Very old beasts, so will probably require some correctional work. I might build both at the same time as I will be using basicaly the same colours.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    September 2013
  • From: San Antonio, Texas
Posted by Marcus McBean on Monday, September 14, 2020 9:01 PM

Just a quick update on SMS Kronprinz build.  As with any new ship build time was taken to clean up the hull and test fit the decks.

Add some detail to the hull and cut out openings for the torpedo tubes, 2 each on the port and starboard sides and one at the bow.

The plastic in this kit is very soft and there is no bracing for the hull to stiffen it also the decking is very flimsy so I braced the two main decks with sytrene I beams to stiffen up the hull and support the weight of the superstructures.

So after all of that I decided to give myself a treat so I assemble the main turrets enough to add the brass barrels.

Next step is paint the decks that are covered with planking and then the hull.  Until next time

Marcus Beer

  • Member since
    September 2012
Posted by GMorrison on Monday, September 14, 2020 1:37 PM

He was a balding, round guy with glasses and a sweet personality. Maria was a classic, a big blonde the kind you'd have hand you a liter of bier.

She always said that they weren't in love, but she loved the kids and he loved her for that.

If you need any help marking the boot stripe I'd be glad to explain how I do it.

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Monday, September 14, 2020 1:18 PM

Thanks for the information, I'll go with the 2 meter width.

In the movie when he received his telegram I think he said it was an order and he got the notice after the takeover.

My family is from Germany and Austria.  I'm not sure where in Germany but the last of the family left Austria after the assination.  After WWI the family land became part of Italy but still retains the family name, now called Monte Baldo and appears to cover a rather large area of tghe mountains.

  • Member since
    September 2012
Posted by GMorrison on Monday, September 14, 2020 10:06 AM

Well the movie has a lot of small inaccuracies, but he commanded submarines in the Austro-Hungarian Navy in WW1.

IIRC he's ordered to report to Bremerhaven. In reality I think it was more like an offer, as he was an Austrian citizen.

And the family took the train to Italy in plain view.

I don't read up on DKM. A boot topping in the USN would extend from unladen waterline to fully laden, and on a bigger ship like Spee it could be 2 meters tall.

By tall, that's the true vertical distance. The actual width of the stripe would vary according to the slope of the side of the ship.

 

Bill

 

 Modeling is an excuse to buy books.

 

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Monday, September 14, 2020 9:35 AM

Forgot to ask, just how thick is the waterline stripe?  I looked at the instructions and there is nothing there about it that I could find.  It just maybe with my eye problems that i misssed it but who knows.

 

Here's a question, in the movie Sound of Music, Capt Von Trapp is given command of a ship.  Does anyone know what type of ship it would have been?

  • Member since
    July 2014
Posted by modelcrazy on Sunday, September 13, 2020 8:45 PM

I got you down Dodgy. The Emden id a 1/350 I believe and like Bish said, which U-boat is that?

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Sunday, September 13, 2020 3:21 AM

Which U-Boat kit have you got Dodgy?

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Sunday, September 13, 2020 3:16 AM

Ok Admiral, i'd like to have a crack at this. My entries will be a Revell 1/72 U Boat and a 1/700?, (will have to check that), Revell SMS Emden.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    July 2014
Posted by modelcrazy on Sunday, September 13, 2020 12:52 AM

I agree with Mongoose. The boot topping should be on both halfs. Possably 50/50. The Germans typically had wider stripes than the RN or USN. I don't know the exact measurements for the Spee.

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    January 2015
Posted by TheMongoose on Saturday, September 12, 2020 10:40 PM

ikar01

Hopefully tomorrow I'll get some pictures posted.  I have some sub assemblies ready to paint, then I'll start with the laders and mounting to the deck.

One thing I'm not sure about is the water line placement.  since the hull is seperated for a waterline project if wanted, I would think that the black line would go on the upper piece of the hull.

 

on mine i checked period photos and found 1/2 tp 1/3 of the black boot stripe showing. 

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list...NOT! Ha, added to it again - Viper MkVii, 1/32 THUD & F-15J plus a weekend madness build!

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Saturday, September 12, 2020 9:57 PM

Hopefully tomorrow I'll get some pictures posted.  I have some sub assemblies ready to paint, then I'll start with the laders and mounting to the deck.

One thing I'm not sure about is the water line placement.  since the hull is seperated for a waterline project if wanted, I would think that the black line would go on the upper piece of the hull.

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, September 12, 2020 4:54 PM

Some very nice paint work on that Mongoose.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, September 12, 2020 4:52 PM

Steve, i haven't use any of their sets either, but then i don't build as many ships as some of you guys. But i have looked at some of their sets when considering what i should get for my kits.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    July 2014
Posted by modelcrazy on Saturday, September 12, 2020 11:00 AM

Chris, Yes I believe yocan thin MM and blend. I would do that with complex Italian and German AC when all I had as a large AB needle and could'nt get precise.

Bish, sorry for the late reply. Yes, I believe the Pontos kit comes with a wood deck. Belive it or not I've never worked with Pontos stuff.

Ikar, looking forward to that Spee. I have the same kit.

Bill, I didn't know anything about this phase of the Tirpitz either. Funny how hosting GB's make me learn more as I research something a member wants to build.

Marcus, excelent!

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Saturday, September 12, 2020 6:13 AM

I'm using the Eduard set.  The instructions show a piece, like a hatch or rail but there is no piece that I can find.  For now I'm crossing of the picctures that finish and circling the areas not done .

  • Member since
    September 2013
  • From: San Antonio, Texas
Posted by Marcus McBean on Friday, September 11, 2020 5:48 PM

I now have room on the workbench to start my entry into this groupbuild.  Here she is ICM SMS Kronprinz Battleship 1/350. 

ICM Kronprinz

I did purchase some upgrades such as P.E., brass barrels and brass mast and yardarms.

Marcus Beer

  • Member since
    January 2015
Posted by TheMongoose on Thursday, September 10, 2020 10:45 PM

GM you bring up an interesting point. I had found some good shots at the Imperial War Museum online just recently. They had a couple showing how they camouflaged with local trees and foliage. I also read an interesting article about how they sprayed the area with a chemical to create fog and hide themselves. 70 years later they have been able to identify how it stopped the tree growth in the area. There are actually no rings in the trees for this time period. Crazy nasty *** they did in WWI & II. Here's the 2 good pics I found at IWM

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list...NOT! Ha, added to it again - Viper MkVii, 1/32 THUD & F-15J plus a weekend madness build!

  • Member since
    September 2012
Posted by GMorrison on Thursday, September 10, 2020 10:11 PM

The history of the Tirpitz hasn't been something I've followed, FWIW.

I have read a bit about the X craft attacks, the Tall Boy bombs, and I've read about the Norwegian operation.

The germans did not do well, only really prevailed after the British became engaged on multiple fronts.

I would ask if some of this camouflage was nets, organic stuff etc.

If the DKM had concentrated resources on u boats as opposed to surface units, the war might have gone differently.

Good thing they didn't.

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    January 2015
Posted by TheMongoose on Thursday, September 10, 2020 9:47 PM

Moving right along Big Smile The forrest green is looking pretty good. I'm trying to match my background trees on the railroad tunnel mountain and the more muted colors in the original color photograph instead of the brighter green in the rendering that I'm using for the pattern. 

one nice thing is that according to the German Camo book I picked up — German Naval Camouflage, 1942–1945 by John Asmussen, “Lack of proper aerial photo documentation has made it impossible to make a top view illustration.”

So anything on the deck is plausible Whistling

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list...NOT! Ha, added to it again - Viper MkVii, 1/32 THUD & F-15J plus a weekend madness build!

  • Member since
    January 2015
Posted by TheMongoose on Thursday, September 10, 2020 5:13 PM

Ikar01, I didn't look back at past posts, is it kit PE or aftermarket? 

 

Tonight's entertainment for me is a modeling puzzle - 50 pieces with no straight edge pieces Surprise now where to start?

 

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list...NOT! Ha, added to it again - Viper MkVii, 1/32 THUD & F-15J plus a weekend madness build!

  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Thursday, September 10, 2020 3:57 PM

Finally got going on the Graf Spee. Having a little problem with the P.E. set because sometimes it's hard deciphering the drawings and matching the two sets of instructions, and then trying to find the correct metal piece on the fret.  Last night I spent a half hour going over everything with a magnifier lens and still didn't fint the piece I needed.

One thing I did notice with this kit and the deck set, the kit showed wood, so I started looking for a wood piece and started thinking it might have been left out, but the particular part I needed was actually metal.  who knew?  In another case I may have been shorted a couple ladders and some vents, but I'll keep looking and building other sections.  Hopefully they will show up later.

  • Member since
    July 2014
Posted by modelcrazy on Thursday, September 10, 2020 9:35 AM

plasticjunkie

Oh my! That looks amazing

 

Ditto

Steve

Building a kit from your stash is like cutting a head off a Hydra, two more take it's place.

 

 

http://www.spamodeler.com/forum/

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Thursday, September 10, 2020 9:06 AM

Oh my! That looks amazing

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    January 2015
Posted by TheMongoose on Thursday, September 10, 2020 6:37 AM

Here's my 1st shot at the camo. Up close I can see there will be some blending between colors needed. Using MM enamels so there is a possibility of thinning it and doing a little brush work. You guys have any experience with this? Could use some suggestions to get rid of the thin white lines left between colors in a few spots. Maybe I just need to air brush those next time I have the color out? Any experience on what works best?

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list...NOT! Ha, added to it again - Viper MkVii, 1/32 THUD & F-15J plus a weekend madness build!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.