SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Lockheed GB anyone?

47828 views
564 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2002
  • From: A secret workshop somewhere in England
Posted by TANGO 1 on Saturday, March 15, 2008 7:26 PM

Lovely work on the Blackbird! I have a 1/72 kit in my stash and I still might build it in the near future.

However..........Today, out of sight of Frank's secret workshop cams I started work on one of my favourite Lockheed fighters of all time. Which one? I'll keep you all guessing for a while..................Big Smile [:D]

 

Regards, Darren. C.A.G. FAA/USNFAW GB
  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Friday, March 21, 2008 9:02 PM

Finally gpt some progress. Glued the wings to the fuselage tonight. I am attaching the wings to the halfves before glueing the to fuselage halfves together to make a little easieir to deal with butt joints of the wings. The shape is pretty close and looks like very little filler will be needed to have a nice looking fit. All in all for a shortrun kit the overall fit is pretty darn ggod. If it had alignment pins and tabs for the wings and stabs it would be a snap to build! In case you have forgotten I am building the Classic Airframes 1/48 Model 14. I have not seen to many build. It was one of the main reasons I chose it for this build.

                                                                                    Soulcrusher

 

  • Member since
    March 2008
  • From: Pa
Posted by chewybr on Friday, March 21, 2008 9:09 PM
Thank you guys for the great comments....it was a great build, nice and easy

-Matt

 

facebook  me Matthew Browning if you'd like to talk about the hobby

Work Bench Builds

Tamiya fw-190 d9 jv44

Revell-Monogram visible B-17G

 

  • Member since
    February 2007
  • From: Pismo Beach
HTTB MODEL
Posted by credible_sport on Monday, April 7, 2008 2:23 AM

 

Hey Guys,

Check out the progress on my HTTB conversion. In my Photo Bucket Account check under HTTB album for recent photos of my Scratch Built 1/72 scale C-130 Cockpit.

I added a HUD display. Look Closely.

http://s232.photobucket.com/albums/ee297/crediblesport/

The HTTB Nose Radome was cut down from a C-141 Nose Radome. I am presently carving the nose out of scrap sprue and super glue.

After I get the nose radome carved out, I will line up the 3 three fuselage sections and glue them together. I added some wider stouter plastic sheet for the fuselage splice.

Then add the Horsal and dorsals fins. The Dorsals fins are just .060 plastic sheets cut to shape. I cut a 3 3/4 inch slot along the aft fuselage section in line with the Horizontal stabilizer; where the dorsal fins will attach to the aft fuselage and Horizontal Stabilizers.

I modified the Horsal Fin from my spare Airfix C-130 Rudder; then added scrap plastic and sprue to form a horsal fin. I will use this as a master to make a rubber mold and pour one out of resin. 

After which I need to carve a wider cord rudder. Maybe widen and build onto the existing rudder. 

Then add numerous fuselage details.

I drilled 2 holes in the fuselage and wings for better wing support.

I need to modify the wing leading and trailing edge. The leading edge has a camber to it. I plan to use some for of circle dowel of 1/2 3/4/ or 1/3 from Evergreen Plastic or Plastruct. Then I need to add about 1/8 inch or more to the trailing edge. The Ailerons and flaps are wider than on a stock c-130. 

Then I need to modify the engine Nacelles and propellers and other small items.

After this Glue the whole thing together prime it and paint it Gloss black and flat black along the wing and fuselage walkways.

I plant to use either white Decal stripes for the Lockheed insignia or print them on my printer.

I Figure this should take 4 2-6 weeks to finish.

Then I will start on my YMC-130 H Credible Sport conversion. Using the lessons learned from the HTTB conversion on the Credible Sport conversion.

The other modelers work here looks Fantastic. 

 

“A C-130 that can do anything can’t always do everything. In 1980, A follow on rescue scheme, Operation Credible Sport, added large retro-lifting, and takeoff rockets, to a YMC-130H with the idea of landing in Tehran's soccer stadium and flying the hostages out. During the first landing trial, the shattered aircraft was destroyed by fire. Before a second effort could be mounted. " Air & Space August 2004 page 43 Carl Posey
  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Wednesday, April 9, 2008 10:28 PM

Hy where did everybody go! I am working on finishing up my entry for the P-38 group build so i have the Model 14 on the back burned for the last two weeks. Anoyone else still out there?

                                                                                             Soulcrusher

 

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Thursday, April 10, 2008 12:31 AM
Crush I'm into this and check in every day. The EC-121 will be created, but I can't start till summer. I'm very excited tho and will be posting something Loughead very soon, on another channel.
  • Member since
    September 2004
  • From: Vernon, BC, Canada
Posted by razordws on Thursday, April 10, 2008 12:59 AM
I'm still here too but like bondoman I won't be starting my P-38 until closer to summer.  I've got two other builds on my bench to finish first.

Dave

  • Member since
    July 2004
  • From: Northern KY
Posted by mucker on Thursday, April 10, 2008 11:02 AM
I'm waiting on some custom made decals....it could be a few more week s before I start back up again on this. Actually I received my canopy masks a few days ago, so now that I think about it I could probably at least start the paint process.

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Thursday, April 10, 2008 11:35 AM

Cool!Glad to know you guys are still out there. it will probally take me another two weeks to finish up my entry for the P-38 group build then I am planning on attacking my Model 14 with a renewed vigor. I have already made good progress on her. All of the pain in the butt stuff is done. I basicly have to build the interior which only consist of the cockpit since there is a solid nose varient. The wings are already mated to the halves all seems are smoothed over and rescribed. I only put her on the back burmer because i wanted to make some serious progress on my monster 1/32 P-38 Lightning.  That has been on my bench for 9 months! This is a record for me. I usally do not have the patience for 400 piece kits because they always take forever to build. I am so looking foward working on a nice little 1/48 kit where progress is mesured in days not months! Hope to see some progress post from everyone in a couple of weeks when I am back into this one. Cheers!

                                                                     Soulcrusher 

 

  • Member since
    July 2004
  • From: Northern KY
Lockheed GB
Posted by mucker on Thursday, April 10, 2008 11:53 AM

i'm looking forward to your large P-38, SC. We'll have our finished pretty close to the same time, hopefully. I messed up the body work enough to stay away from a NMF, but all the decal sets out there are for NMF. I'm having some custom ones made so I can do the OD/NG scheme to help hide my gaffs.

It really is a nice kit....just take a lot of time to sand, file and fill.

 

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Thursday, April 10, 2008 4:39 PM

Well mucker mine definety would not win any awards but she looks respectable enough to finish in NMF. Many errors are hidden under the painted black nose and engine cowls. The main reason I chose these markings! Even though it is for the P-38 GB I'll post some pics over here and you can judge for yourself how noticable the missing detail from the engine cowls looks. I personally did not deem it worth while to rescribe both of the engine cowls. Lost to the many hours of sanding sticks to make the cowl panels the same shape as the front of the wing panel. Nine months is enough for me. Time to move on. I can wait to see your when you get your decals there mucker.

                                                                                            Soulcrusher

 

  • Member since
    July 2004
  • From: Northern KY
Posted by mucker on Friday, April 11, 2008 10:47 AM
SC: I just took a peek over at the P-38 GB and I must say you tackled the body work much nicer than I have. THat's a realy looker you've got going. 9 months is indeed a long time (kinda like giving birth to the model, no?), but she'll be displayed a lot longer than that, so your effort has definately paid off.

  • Member since
    October 2007
  • From: Bothell, WA
Posted by btp2k2 on Monday, April 14, 2008 3:20 PM

a long time ago, I posted that I was going to enter the GB with a 32nd scale Hasegawa F-16A+/C....I finally got off my butt and started on it....

Here is the cockpit....

Cockpit with seat. Seat is all white metal (Nice, as it eliminates the need for nose weights)

The kit is an odd mix of raised and recessed panel lines. I am in the process of giving the kit an entire rescribe, which I am not sure you can see really good here.

This is my first scribe job, and I am learning along the way. I am pretty happy with the results so far.....not really sure how I am going to do the rivets on the fuselage top and wings though....any suggestions?

Paul I Like Tomcats!
  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Monday, April 14, 2008 6:17 PM

Nice cockpit so far. I am glad to see this thread is coming back to life.I plan on doing a little cockpit work on my model 14 tonight so i can close up the to halves then mabye i will have some pictures to post worth looking at.

                                                                                 Soulcrusher

 

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Monday, April 14, 2008 7:48 PM

Looks like you're off to a good start on what looks like an ambitious project (seriously doubt I would have the patience for all that rescribing). I've been waiting for some markings to come in the mail for my entry (I like to have everything on hand I'll need for a build before I start it....guess I'm kinda quirky that way Wink [;)] ).

Soulcrusher, I'm looking forward to the progress pics of your model 14. Hopefully soon I'll have some to show as well.

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    October 2007
  • From: Bothell, WA
Posted by btp2k2 on Tuesday, April 15, 2008 12:48 PM
 ruddratt wrote:

Looks like you're off to a good start on what looks like an ambitious project (seriously doubt I would have the patience for all that rescribing).

It actually isn't very ambitious. Luckily, the way Hasegawa did the kit makes it easy. They engraved all the little access panels and all the goofy shaped stuff....so the only thing I need to do is scribe the main panel lines which are usually nothing more than a long straight line.....I finished the bottom half of the fuselage in a little under a day....need to go to the art supply store and get a pounce wheel for the rivets before I can really start making progress on the top half

Paul I Like Tomcats!
  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Wednesday, April 23, 2008 10:02 PM

Well I am totally disapointed in my attemp to model my P-38 in weathered aluminum so I have turned my attention to my Model 14. I have made great progress. Building this kit as a model 14 and not a Hudson MkI has made some points easier and some harder. i saved alot of time because i did not have to construct the complicated rear turret but the hole is already in the fuselage so you have to glue the plug in and putty sand and rescribe the panel lines. The solid nose means less glass to mask but it took alot of sanding to make the solid nose fit the fuselage and then rescribe all of the lines. I have her all closed up and sanded and rescribed. Now for all of the little fiddley bits, and there are alot of them. You know all of the little pieces you do not dare add in the steps the instuctions dictate because you know they will only be broken. To late tonight but I will post some pics tomorrow. The reviews are spot on about the interior. The fit is lousy and the insrtuctions are very unclear as to placement. Thank god you will not be able to see much as the model 14 only has a windscreen and two side windows so almost nothing of the interior will be visible once the canopy goes on. Hope to hear from some of you other guys and get this group build roling agian.

                                                                                Soulcrusher

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Thursday, April 24, 2008 11:11 AM
Mike- PM inbound! Big Smile [:D]

Frank 

 

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Thursday, April 24, 2008 5:28 PM
Got it and replied, buddy! You're all set! Thumbs Up [tup]

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Thursday, April 24, 2008 5:35 PM
Thanks Mike! Big Smile [:D]

Frank 

 

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Friday, April 25, 2008 8:45 PM

Finally layed down some color tonight. Nothing fancy just tamiya silver with a coat of future over it. This was probally not the best chioce of kits to do a silver finish on. Just about every part needed to be sanded to fit properly. This is suppose to be the last of Classic Airframes old moulding technology. Definetly buildable but it will definetly wear you down having to sand fill and rescribe almost every single part. I am hoping the large civilian registration letters will break up the single color scheme as she looks a little boring right now.

                                                                            Soulcrusher

 

  • Member since
    July 2004
  • From: Northern KY
Posted by mucker on Friday, April 25, 2008 9:40 PM

Nothing at all boring about it, SC! You did a great job with all of the "body work" and she's well on her way to being another stunner.

 

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Friday, April 25, 2008 9:53 PM

Thanks for the kind words there mucker. After my disapointment of the finish on my P-38 I really needed some positive results to keep me from getting to bummed out. I have some rough spots of the future coat to polish out and then I will add the decals and lay on another coat of future hopefully without any dust or runs in it! Then there are a couple of fiddly bits to add and I can tuck her away safely in the display case. I have not added a model to my display case for almost nine months! NMF is not one of my best skills so I decided I would school myself and build a couple. P-38 not so happy with, Model 14 not perfect but i am making progress on my NMF skills. Hopefully i can post some nice pics with decals in place soon to repair my bruised ego.Black Eye [B)]

                                                                              Soulcrusher

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Friday, April 25, 2008 9:58 PM

SC-

If this build doesn't boost you ego, I don't know what would!  Great looking finish from here, mate.  She's gonna be a stunner!

Pirate [oX)]

Frank 

 

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Friday, April 25, 2008 10:14 PM

Thanks Frank! I feel better already!Big Smile [:D]

                                                                                 Soulcrusher

 

  • Member since
    September 2003
  • From: South Central Wisconsin
Posted by Daywalker on Friday, April 25, 2008 10:22 PM
Good man!  Parley?  Down to the depths whatever man that thought up "parley"!

Frank 

 

  • Member since
    February 2006
  • From: Smithers, BC, Canada
Posted by ruddratt on Friday, April 25, 2008 10:34 PM

That looks really nice from where I'm sitting, SC. Thumbs Up [tup] It's gonna be a winner for sure!

....and don't feel bad about not having added anything to your diplay case in almost 9 months. I'm going on a year of looking at the same completed builds. Got a feeling that's about to change, though! Wink [;)]

Mike

 "We have our own ammunition. It's filled with paint. When we fire it, it makes pretty pictures....scares the hell outta people."

 

  • Member since
    March 2007
  • From: Carmel, CA
Posted by bondoman on Friday, April 25, 2008 11:08 PM

She is a beauty for sure. I've been building the same kit for about 6 months now and it's over my head. But I'm really happy to see you finish this.

Are you going to krystal clear the windows?

Note: The kit has clear windows with NO internal flange; what were they thinking?

Great stuff crusher!

  • Member since
    July 2004
  • From: Northern KY
Posted by mucker on Friday, April 25, 2008 11:24 PM
 soulcrusher wrote:

Thanks for the kind words there mucker. After my disapointment of the finish on my P-38 I really needed some positive results to keep me from getting to bummed out. I have some rough spots of the future coat to polish out and then I will add the decals and lay on another coat of future hopefully without any dust or runs in it! Then there are a couple of fiddly bits to add and I can tuck her away safely in the display case. I have not added a model to my display case for almost nine months! NMF is not one of my best skills so I decided I would school myself and build a couple. P-38 not so happy with, Model 14 not perfect but i am making progress on my NMF skills. Hopefully i can post some nice pics with decals in place soon to repair my bruised ego.Black Eye [B)]

                                                                              Soulcrusher

Espcially considering this is Tamiya paint for your NMF, it came out great.

ON a side note, I'm out in your neco of the country this week and I finaly get a chance to get to Chino Air Museum this Saturday. Woo Hoo!!!

 

  • Member since
    December 2005
  • From: back seat of your car with duct tape streched out
Posted by soulcrusher on Saturday, April 26, 2008 11:24 AM

 Daywalker wrote:
Good man!  Parley?  Down to the depths whatever man that thought up "parley"!

Aye Captain! Off with his head straight away! Pirate [oX)]

ruddratt Thanks for the compliment. I hope to be right there with you and move some models offf the bench and into the case

bondman I did a little experiment before I closed the two halves I knew I did not want to mask all of those little windows and you know they would only fall into the fuselage if you placed any pressure on them from the outside so I did a test. I beveled the opening from the outside around the openings and made a small legde so the window could be put in place from the outside after painting. With just a little fileing you can achive a decent fit and avoid masking all of these windows.

mucker have a great time at Chino but remember be cafefull touching because if you break it you bought it! Whats the limit on your credit card?Shock [:O]

                                                                                  Soulcrusher

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.