The Official F4U Corsair Group Build 4/01/08 - rolling end date

Looking good Sean!!!!!!!!!!!!! Great work!!!!

Harv hope all is well with your wife! My wife had hers out a few years ago and it was sucha relief. She'll be fine once it's out. One of those things your body can live without. All the best!

Arron - thanks for stopping by, next time bring some donuts and coffee [:)

Richie - Thank you, I am beginning to find less parts scattered around the bench and in boxes,,, Yipee ! 

another update, I almost forgot I needed to decorate this bird before it really gets beat up..

GO NAVY !

Sean- Is that one of Kenneth Walsch's rides?  I like it!

Harv- Hope everything goes OK with your wife.  I'll keep you both in my thoughts and prayers.

Harv - Hope all goes good with your wife. I truly hate it when mine goes to the hospital.

 Sean - looking sharp! Can't wait to see it finished

Ditto from Down Under Harv -- hope she's home and rested real soon. I can vouch for it being a bit you can pretty much do without, the possibly-soon-to-be-Mrs-T.bolt lost hers many years ago and hasn't really missed it.

A bit of progress is occuring, the engine is nearly done, i hope to have a couple of shots up soon.

Cheers,

Mike

  I want to thank ALL of you! You are like family to me. I cant tell you what it means for your support.Small update: no surgery today. Seams her pancrase(?) is realy pissed of at her and no surgery till its happy. Mabey tomorrow or Friday. And they wont let her come home till the surgery is done. So I worked tonight. Need to pay the bills you know.

   Summit, thank your son for the joke.It put a smile on this weary face, and I needed it.Thanks again all........Harv

Hi guys,

I promised pics of my Tamiya -1D, and here they are:

Engine painted and assembled: I sprayed the cylinders a mix of chrome silver and satin black, then treated them with two coats of Promodeller wash. I sprayed the gear case gloss aircraft gray, and used more wash to pick out details and dirty her up a tad. I considered getting fancy with the detail painting but at the last minute I pulled out reference photos and of course found that different models of the R-2800 have different details, and many Corsairs of the -1 series seemed to have plain gray and metallic engines... SoI left it at that.

" border="0" />

Next, the engine and exhaust unit are mounted to the fuselage:

" border="0" />

And lastly, the cowl is mounted over the engine. Note the filled and sanded wingroot joint.

" border="0" />

Today I also painted the gear bay doors on the sprue, exteriors FS 36622 MM enamel, same as the lower hull will be, and interiors the mixed acrylic Interior Green. They'll get a panel wash treatment to pick out the details. That'll be all on this project until at least next week, when my next major task should be mounting the wings.

Cheers,

Mike/TB379

Looking good Mike!  Looks like that seat could use some belts.

I am planning on working on the -2N today, as I am off and I hear those poor lil' Corsairs calling for me.

simpilot34 wrote:

Sean that is really looking good mate!!!!! Just one thing and it's prolly just a nitpicky thing that can be ignored, but just noticed the exhaust staining comes straight back. All pics I have seen of the staining follow the airflow of the wing as it sweeps up and over. I wouldn't bother changing it now but it's just my

Richie - I know exactly what you are referring to. I kept cutting out "masking tape" streaks for patterns, the ones that had the shaped curve to them just looked horrible. I am thinking either the exhaust are too high maybe or I was havinfg a "bad art" day. I will use some pastels and trail down the edge some more from the airbrushed burn to try to improve the curve. 

Thanks guys for checking in and the comments

Looking good, Sean

But it looks like he had a cylinder fire and toasted his panel a bit .

-Fred

EDIT: shape of the new exhaust stain looks better, but I'd darken it up a bit

Landing Gear attached. I have historically had problems with this so this time I assembled them as one piece and then attached them.

I noticed the STBD wheel was a little crooked after I took the photo. I tweaked it into shape. All that is left is the fiddly bits and decals. Already hit it with Future so hopefully decals will happen this weekend.

Thanks for looking and as always, any and all comments are welcome.

Regards,

Jeff

Great looking progress Jeff!  You're really making me want to work on mine.

Having some trouble with mine, so they have been set aside for a while.

Jeff -All~right She is looking Real Good with its legs under her. Nice thing about photos, they can really make the little things stand out and be noticed before it is too late. I know how excited you must be getting to have it almost done

I have some rather disturbing news, yesterday removing my Corsair out of the spraybooth I brushed the port side wing against the top and knocked her out of my hand for a free flight crash. Plastic could be repaired but just about the whole PE office did not fare so well. She is dead to be stripped of salvagable parts. I guess I will finish up my little Matchbox 1/72 Corsair for this one.

Thanks Frank.

Bro, I hear you. Can't tell you how many times I had to put a kit up because of "issues". I guess thats the way to go instead of trying to "force it". We still have 5 months to do this so no hurry.

I mentioned the hard camo lines before. I was thinking using some sort of pastel dusting to soften them. Have you ever heard of this being done before? And if so, do you have any tips? Any ideas would be appreciated.

Regards,

Jeff

SEAN! AWWW CRAP!

Is there any way you can use something thin to apply some CA and make it all stick? If you can do that and maybe carefully add some sort of wash perhaps you can hide the glue. Give it a shot. Hate to see you get so far and then just chuck it. Can't look any worse than mine...

Regards,

Jeff

Sean- OMG, that is horrible news!  I am so sorry to hear that.  That is one of the worst things about this as a hobby, having your pride and joy dismantled for parts.  Yesterday must have been a bad day for Corsairs. 

I pulled the twins out to work on them yesterday, and found that all of the seams (which were perfect a month ago) have sunken in and need to be completely redone.  I used liquid cement, and superglue as a filler.  This is the 3rd and 4th time I have run into this.  Not sure what I am doing wrong, but I need to figure it out.

Jeff- For softening up those lines, I don't think pastels would work very well.  My solution (if you're up for it) would be to take a very diluted version of the darker color of the two at the damarcation line and lightly spray it over the edges.  That would add some feathered edges to the colors.  I would try it on a scrap piece first, to be sure it will work for you.

Sean! Never give up! Never surrender!  We are attacking constantly and are not interested in holding on to anything but the Corsair! Your gonna hold onto it by the nose and kick it the tail! Your gonna kick the dickens outta it all the time and go through it like poop through a goose!

Now remember no such and such ever built a Corsair by letting it die for it'a country! He built it because the other poor dumb such and such couldn't! 

Like Mac Arthur the F4U shall return! 

Shock! Anger! Denial! no acceptance only the desire to kick some behind!!!!

Get it glued Baby!

 Good job on the other one! Jeff! Get her done with grit and determination!

Frank Avoid superglue and liquid cement! One or the other my best advice. Fill thin seams with other less prodigious means! Heck they are Tamiya kits? Seams? Must be some optivisor!!!! Need one of those!

All right you so and so's You know how I feel! I would be proud to build a mosdel with you anytime! Anywhere! and that is all.............

 Sean there is no way you can let your self be beaten by plastic made in China! Your an American! Gorilla glue it! Magic tape it! Heck spit on it!

Ummm....errrr...YEAH! WHAT AaRON SAID!!!....

WAS IT OVER WHEN THE GERMANS BOMBED PEARL HARBOR? HELL NO! AND IT AIN'T OVER NOW!

So, anyway, good luck bro...

Regards,

Jeff

My fellow American Corsair fans Jeff, Frank and Aaron ...thats as much as I could think up for a speech But Thanks for the kind words I really was not too shocked , as my mind flashed back to being a kid and remembering the song "The Witch is Dead" from The Wizard of Oz....Ahhh Judy Garland how I did love thee ...ooops sorry back on track

Jeff- Easy fix - Take a piece of paper from your printed and cut it down to fuse length and a little taller. Lay it over your pattern and shetch over the border . Remove and trim off and discard what would be the light colored portion. Tape your pattern to where it is about 1/8 " lower then the original paint. Roll a piece or several small pieces of tape into little tubes no larger then 3/16" diameter. Lift the bottom edge of your paper template and place the tape tubes about 1/4 " from the bottom to give a little lift. Respray over the bottom edge of the template and it will give you your soft edge....

 Frank - I am more concerned over your problem then mine, what type of cement and superglue are you using ? Regular hobby stuff or department store bargin type ? Something is having too hot of a reaction over time to cause that.  

Aaron - Thanks for being a great cheerleader, no I dont want to see you dressed up as one (unless you wear those boots ) Thanks for the terrific post, it really made me laugh.. Just for you I will re~examine the cardboard box of chinese plastic in a day or so. 

Sean- I am more concerned for your COrsair!  You have put so much blood and sweat into that bird I hate to see her relegated to the parts bin.  I really do hope you are able to find a way to fix her.  I had a Corsair go south last year, reason being my rush to get her into the paint shop.  During the strip and repaint, I broke off a wing and ended up scrapping her.

As for my troubles, they have only surfaces thus far on Tamiya builds.  I LOVE Tamiya kits, but recently have been having a lot of trouble with the seams.  I posted asking for some help here, but not much help yet.

Sean, sorry to hear about the incident - I did something similar on an earlier build.  I salvaged what I could and moved on.  Not much more you can do.

Frank, I personally hate using CA as filler and only use it on resin parts.  What you may want to try is making a styrene slush.  Take some scrap styrene (cut into itty bitty pieces) and mix with some styrene glue (ambroid/pro-weld/tamiya/etc) until you get a pasty consistency.  Then use a toothpick to fill your seams (use tape on either side of the seam to minimize over-run).  Remove the tape and sand when dry.  There's no shrinkage and since it's styrene, it sands, blends and paints just like the plastic around it.

-Fred

Fred-

Thanks for the help!  Funny you mention this, I stopped by at my LHS yesterday and bought some Ambroid Pro-Weld and Tenax 7R.  CLipped off a couple of pieces of sprue to chip today to make myself some slurry.  I'll let you know how I get on with it.  Thanks again for the help fellas!

Removed self from build.

Joe, Photobucket is extremely easy to use.

From your photobucket screen (assuming you've logged in) click on the blue box labeled "choose files".  This should open a pop-up window with your picture files in it.  Select one (or more) photo(s) and hit enter.

Photobucket will start to upload the file.  Once it's uploaded, you'll see a smaller version of it on your screen.  Roll over the picture with your pointer and you'll be presented with a drop-down box with multiple options.  Go to the one labeled "IMG Code".  Left click on the code (in the box) to highlight it, then right click to open another option box and click on "copy".

Now, come to FSM and create a post.  When you're ready to post the picture, hit "Ctrl V" to paste (or right click to open the option box and click "paste").  It's literally like 5 clicks, start to finish.

Hope that helps.

-Fred

firesmacker wrote:

WAS IT OVER WHEN THE GERMANS BOMBED PEARL HARBOR? HELL NO! AND IT AIN'T OVER NOW!

 Jeff, what ever you're drinking - pass it over

Sean, come on man - gotta be some way to salvage this hog. Ok, most of the etch may be toast, but I'm sure the pit still looks good and as you said the plastic is still useable.

Now that looks much better Sean!!!!!! Great Work!!!!!!!!! If you darken it as suggested it won't take much as that looks great to me and just the right color as I have seen in photos. I have one pic that shows the streak running almost to the tail albeit faint but its there. Great work!!

Gigatron PM inbound