SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

251 Halftracks GB 1 October '08 - 8 June '09

129714 views
1459 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2007
  • From: N.H.
Posted by panzerguy on Monday, September 29, 2008 1:11 PM

 

   Dupes I'm here bro and I've already got a plan for it.

"Happiness is a belt fed weapon"

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Monday, September 29, 2008 1:47 PM
I am still here. Just not been getting on here mutch.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    October 2004
  • From: League City, Texas
Posted by sfcmac on Monday, September 29, 2008 3:29 PM

I have just been way busy looking at all the AMPS East builds to pay attention! Well that and a storm called Ike put the kibosh on my building for the last 2 weeks. But I am raring to go! Is it Oct yet?

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Monday, September 29, 2008 3:54 PM

Excellent! Good to hear from you guys.

Not quite October sfcmac...but awfully close! Smile [:)]Thumbs Up [tup]

  • Member since
    October 2007
  • From: Louisville, KY
Posted by pordoi on Monday, September 29, 2008 7:54 PM

Still here Dupes and ready to go on the /18.  Even scored a copy of "Wireless for the Wehrmacht" to help out with the radios.  Just a waitin' for the green flag.

 Don

 

  • Member since
    November 2007
  • From: Wisconsin Rapids, WI
Posted by moose421 on Monday, September 29, 2008 8:08 PM
I am still in.  Just have to finish my b-berg kitty for the red storm GB.  My /23 looks marvalous.  No need to buy any AM for it.  What a change.Party [party]
  • Member since
    March 2008
  • From: Cheney, WA
Posted by FastasEF on Monday, September 29, 2008 8:56 PM

I am still very here! Have the kit and some book info.

I actually have some photos of that Ambulance version. Just need to scan them and post them if anyone wants them.

Josh

  • Member since
    June 2008
Posted by lewbud on Monday, September 29, 2008 9:25 PM
I'm still here.  Got several builds to go first.

Buddy- Those who say there are no stupid questions have never worked in customer service.

  • Member since
    May 2006
  • From: Queensbury,NY
Posted by panzer88 on Tuesday, September 30, 2008 7:25 AM
I'm still here. One more day, I have kit in hand and ready to go. Counting down the hours now...

     

  • Member since
    March 2007
  • From: NJ
Posted by JMart on Tuesday, September 30, 2008 7:53 AM
 dupes wrote:

Jmart - for some reason I was under the impression you were going to do the Tamiya /9? Don't get me wrong, I'm fired up that you're going all out on the AFV kit! Should be an awesome build...and that PE set looks sweet.

yep, I was going to do the tamiya, but saw this combo online and went for it..figured, first time doing a non-tamiya armor and first time PE, may as well go for it now in a place I can get plenty of help! :)

I wont be able to start till early next year though, still have to finish other builds and get some research/reading done on this type of machine...  look forward to it! cheers

 

 

 

 

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Tuesday, September 30, 2008 8:04 AM

Excellent! Thanks for checking in guys. Still a few assignees I need to get a hold of, though.

Looks like we're going to have a veritable flurry of chocolately 251 goodness starting...TOMORROW! Approve [^]

  • Member since
    December 2002
  • From: Reno, NV
Posted by espins1 on Tuesday, September 30, 2008 10:17 AM
Hey Dupes, just checking.  Going by the list, am I building a 251/1 with or without the Pak40?

Scott Espin - IPMS Reno High Rollers  Geeked My Reviews 

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Tuesday, September 30, 2008 10:45 AM
Let's see...you are the "straight up" 251/1 variant. Should you choose to add a PaK 40, that's fine, but be sure you don't make any alterations to the chassis/towing pintle to turn your build into a /4 (light artillery tractor). That's Boyd's turf. Mischief [:-,]
  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Wednesday, October 1, 2008 9:00 AM

Judging by my calendar, it is now GAME ON! Yeah!! [yeah]

Feel free to commence any and all 251 action immediately. Wink [;)]

  • Member since
    December 2002
  • From: Reno, NV
Posted by espins1 on Wednesday, October 1, 2008 9:47 AM
There should be some really cool builds in this GB, I'm stoked!  Cool [8D]

Scott Espin - IPMS Reno High Rollers  Geeked My Reviews 

  • Member since
    April 2007
  • From: Schroon Lake, NY
Posted by SMJmodeler on Wednesday, October 1, 2008 9:50 AM

dupes: Double check for me, still here!

  • Member since
    April 2003
  • From: 41 Degrees 52.4 minutes North; 72 Degrees 7.3 minutes West
Posted by bbrowniii on Wednesday, October 1, 2008 10:45 AM

 dupes wrote:
but be sure you don't make any alterations to the chassis/towing pintle to turn your build into a /4 (light artillery tractor). That's Boyd's turf. Mischief [:-,]

 

YEAH!!  Hey, dude!  Stay away from my /4!! Evil [}:)]Wink [;)]Tongue [:P]

OK, game on!!  Whoohooo...  I gotta get started on this thing ASAP!!!

'All that is necessary for the triumph of evil is for good men to do nothing' - Edmund Burke (1770 ??)

 

  • Member since
    December 2002
  • From: Reno, NV
Posted by espins1 on Wednesday, October 1, 2008 11:16 AM
 bbrowniii wrote:

 dupes wrote:
but be sure you don't make any alterations to the chassis/towing pintle to turn your build into a /4 (light artillery tractor). That's Boyd's turf. Mischief [:-,]

 

YEAH!!  Hey, dude!  Stay away from my /4!! Evil [}:)]Wink [;)]Tongue [:P]

OK, game on!!  Whoohooo...  I gotta get started on this thing ASAP!!!

I'm not touching my pintle.  What bbrowniii does with his tow pintle is his business..... heh heh heh Shock [:O] Smile,Wink, & Grin [swg]  Laugh [(-D]

Scott Espin - IPMS Reno High Rollers  Geeked My Reviews 

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Wednesday, October 1, 2008 3:20 PM
Glad to see everyone's excited...I myself am VERY fired up for this GB! Took the Cyber Hobby /2 out of the box earlier and started caressing and rubbing the spru - nevermind. Whistling [:-^]
  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Wednesday, October 1, 2008 3:43 PM

Seeing as i am a bit against the clock, i made an early start. I was up an hour early this morning and got started before i went to work. I then had 4 hours solid tonight. Luckly i am not at home for over a week so i don't have kids or the other half to worry about and can concentrate on the important things in life. I am going to be building a bit quicker than i normally would to get as mutch if not all done by the end of the month.

O far i am quite please with what i have found. There are a few sink holes on the lower hull interior but these will be covered by the ammo bixes. I have left out all the parts that go under the floor, i think these will be the same for most Dragon 251's. There is also alot to clean up on the road wheels. I am going to use the easy tracks as this require no clean up so will be quicker. I have made a start putting a few links together and despite the small size they go together nice and if careful with the clue they are movable. As i prefer to build and paint my tracks off the vehicle this is handy.

I will be takeing pics as i go but not sure if i can load them up from here, i am going to try at the weekend. If not i will post them as a oner when i get home.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    October 2007
Posted by White_R34 on Wednesday, October 1, 2008 3:46 PM
Yep day 1 is here do you know were your halftracks are?Burger [BG] Good luck and happy building guys & girls.
Building the Impossible Is my main goal!!
  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Wednesday, October 1, 2008 3:56 PM

No problem Bish, with your impending deployment I'd like to see you be able to get as much done as possible before you leave. Can't wait for those pics! Wink [;)]

Hey - a few people I still haven't heard from in one form or another in a while...if you guys could check in that would be spectacular

MPKev31B
Luftwoller
Assurgeant
Russamys

That looks like everyone...going to be a full boat! Big Smile [:D]

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Wednesday, October 1, 2008 5:43 PM
I have a better than average chance of finsihing off the Red Storm GB tonight.  I may take a day of rest (yeah right) before I start... but... start I willEvil [}:)]

Marc  

  • Member since
    April 2003
  • From: 41 Degrees 52.4 minutes North; 72 Degrees 7.3 minutes West
Posted by bbrowniii on Wednesday, October 1, 2008 6:20 PM

 wing_nut wrote:
I have a better than average chance of finsihing off the Red Storm GB tonight.  I may take a day of rest (yeah right) before I start... but... start I willEvil [}:)]

 

A day of REST??!!  Wuss......Blush [:I]Propeller [8-]

'All that is necessary for the triumph of evil is for good men to do nothing' - Edmund Burke (1770 ??)

 

  • Member since
    April 2003
  • From: 41 Degrees 52.4 minutes North; 72 Degrees 7.3 minutes West
Posted by bbrowniii on Wednesday, October 1, 2008 6:46 PM

Hey dupes,

By the way, I got completely HOSED!!!  I was planning to apply your brilliant scheme of using two Squadron fliers, and really loading up on stuff...  well, dontcha know that I have yet to receive my October sale flier...  what is up with THAT???!!! 

'All that is necessary for the triumph of evil is for good men to do nothing' - Edmund Burke (1770 ??)

 

  • Member since
    March 2008
  • From: Cheney, WA
Posted by FastasEF on Wednesday, October 1, 2008 10:53 PM

Well, I was going to post a picture of the kit but for some reason my phone won't send pictures to my e-mail. Gonna have to wait. This'll be the most detailed kit i've built yet.

Looking forward to it!

Josh

  • Member since
    April 2006
  • From: LaValle, Wisconsin
Posted by Hermesminiatures on Thursday, October 2, 2008 12:07 AM
The 251 sure has a fiddly suspension, especially the height regulator on the rearmost torsion bars. Needless to say, I won't get to the scratchbuilding part for a while yet.

Jonathan

For every modeling technique that works, I have three that don't.

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Thursday, October 2, 2008 5:25 AM

Sooooo...who's going to be the first one to post pics of some 251 work? Laugh [(-D]

Boyd - you did get hosed. Do you usually get your catalog before the end of the month? Sadly, I missed out as well - some nasty intestinal attack hit me on the 30th (the day my catalog came...and the day I needed to place the order). I was in a drug enduced stupor when I should have been calling Squadron to place my order. HIGHLY disappointed. Here's me hoping that the November catalog has some good deals. Yuck [yuck]

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Thursday, October 2, 2008 6:29 AM
 bbrowniii wrote:

 wing_nut wrote:
I have a better than average chance of finsihing off the Red Storm GB tonight.  I may take a day of rest (yeah right) before I start... but... start I willEvil [}:)]

 

A day of REST??!!  Wuss......Blush [:I]Propeller [8-]

Wuss? WUSS?Angry [:(!]...OK... MaybeBlush [:I]  Maybe I should count last night as the "rest" period.  I made it to the end of "Bones" and was down for the count at 9 PMDisapprove [V]  Maybe I'll get to the brackets tonight.

Marc  

  • Member since
    February 2007
  • From: Bournemouth UK
Posted by Luftwoller on Thursday, October 2, 2008 7:56 AM

Helloo....Im here.

...Guy

..'Your an embarrassment to the human genus, makes me ashamed to call myself Homo'.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.