SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Tiger Model AMX-10RCR

2755 views
27 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Tiger Model AMX-10RCR
Posted by RBaer on Wednesday, December 15, 2021 6:04 PM

No tracks! It's neat looking though, and French. What could go wrong? I wanted a quick and easy build, no scratch building, no hard thinking, and this kit is perfect for that. Parts fit, the instructions are easy enough to follow, and it looks to be well molded and well engineered. It to all of two hours to have the suspension done and hull halves joined. The tires are really good too, having good sidewall detail and the slight mold seam came off with a few swipes of a sanding stick.

 IMG_2563 by Russel Baer, on Flickr

It's bigger than I thought it would be too, the hull nearly as long as an M60, but considerably narrower. Should be a fun build.

Apprentice rivet counter.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Friday, December 17, 2021 11:41 AM

Well, fitting of the front and rear hull plates has revealed a wee problem: all the joins are beveled, and the fit is not great. After thinning the plates to get them to sit as flush as possible, remaining gaps are filled with Vallejo plastic putty and lightly wiped with a damp Q-tip or my finger to remove excess putty, hopefully leaving the gap filled. Only primer will tell. 

 IMG_2565 by Russel Baer, on Flickr

 IMG_2564 by Russel Baer, on Flickr

There's a fair amount of details at the edges of the joins, making cleanup and sanding a tedious process, but as the original was amphibious, I'm thinking I need virtually seamless joins here. It's still a fun build, just not the shake-'n-bake I had initially thought it might be. And the ejection pins: some are huge, like a leak in a sprue gate. I have also found evidence of a short-shot here and there on the edges of the hull panels, more putty required.

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, December 19, 2021 7:06 PM

Oh wow, never built a Tiger kit but surprised a new kit would have fit issues. Looks like you have things under control though. Very cool AFV. Where's Waynec? He's a big war wheels fan.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    April 2015
Posted by Mopar Madness on Monday, December 20, 2021 12:37 AM

Looks great!  May have to put this one on the wish list.

Chad

God, Family, Models...

At the plate: 1/48 Airfix Bf109 & 1/35 Tamiya Famo

On deck: Who knows!

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Wednesday, December 29, 2021 5:17 PM

It's a decent kit, makes me think of an older Tamiya kit maybe, or old Dragon: decent detail, not a whole lot of parts and fair to middlin' fit.

As soon as I get my whiffle in paint I'll be back on this, it's fun. 

Apprentice rivet counter.

  • Member since
    May 2020
Posted by Keyserj on Friday, December 31, 2021 12:32 PM

The look of wheeled afvs have really grown on me. I bet it sure is great not having to deal with tracks with this kit.

"Why don't you knock it off with them negative waves?"- Oddball

 

John

On the bench:

 

                     

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Monday, January 3, 2022 1:20 PM

In one way, yes, it's going to be a quicker build not dealing with tracks. But, and it's a big one, part of the reason I build tanks is that I have always had a thing for stuff with tracks.

Six of one, half dozen of the other I guess. At least it's got a big gun.

Apprentice rivet counter.

  • Member since
    July 2015
Posted by MR TOM SCHRY on Monday, January 3, 2022 1:47 PM

Your progress is looking great!  Are the kit's tires vinyl?  Are you going to keep them or switch them for resin or 3-d printed tires?

TJS

TJS

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Monday, January 3, 2022 8:12 PM

Now that's different,coming along g great.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, January 4, 2022 12:41 PM

I'll keep the kit tires. They're some sort of soft plastic, easy to get the center seam off of with only gentle sanding.

Thanks Anthony, kind of out of left field for me.

Apprentice rivet counter.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, March 15, 2022 9:56 AM

Ready for primer, which I'm sure will reveal lots of things to fix- the tan plastic is kind of hard to see for me. I had a few slight fit issues with the turret, nothing major, I think. Only primer will tell.

 IMG_2847 by Russel Baer, on Flickr

 IMG_2846 by Russel Baer, on Flickr

'Scuse the lousy pics, I managed to aggrevate an old back injury and I'm not particulary steady-handed at the momnent.

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, March 15, 2022 8:04 PM

Looks cool! 

Hope you feel better soon Russel. My back hasn't been feeling that great lately, no injury- I think it's just getting old... 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, June 14, 2022 5:25 PM

It's ...   orange. funky base color, but it IS French.

 IMG_3286 by Russel Baer, on Flickr

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Wednesday, June 15, 2022 8:28 PM

Yeah, you're right- I guess the French would call it tan but it does look more like a light orange. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Friday, July 15, 2022 3:32 PM

I haven't done any brush work in a long time, and needed to get my *** back before I do either one of the Challengers, so this thing was perfect. This is just the first coat, no clean-up at all.

 IMG_3479 by Russel Baer, on Flickr

Kind of garish now....

Apprentice rivet counter.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Thursday, July 21, 2022 9:05 PM

Still pretty bright, but done. All in all a nice kit.

 IMG_3492 by Russel Baer, on Flickr

 IMG_3490 by Russel Baer, on Flickr

 IMG_3493 by Russel Baer, on Flickr

I have no idea where this thing may have been deployed, so I kept the weathering to a minimum.

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Thursday, July 21, 2022 9:08 PM

Ohhhhh, that's cool looking! 

Nice work as always! Heart

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Friday, July 22, 2022 8:45 PM

Thanks G. I can't call it one of my best, too many construction booboos that I didn't catch when I was building it, and then I kind of forced the finish just to finish it. Long story there, I'm better now. Cool

Apprentice rivet counter.

  • Member since
    June 2014
Posted by BrandonK on Sunday, July 24, 2022 10:24 AM

Sweet!! Gotta love all those big wheeled warriors that we don't see enough of in various subjects. Very well done!

BK

On the bench:

Tamiya 1/35 M4A3E8 "Fury" with crew,

1/32 Kittyhawk Kingfisher,

1/35 Meng Panther Ausf A Early,

1/48 Pro Modeller P-51C "Boise Bee"

2022 Completed:

1/25 Revell 29 Highboy

1/48 Tamiya Sea Harrier

1/25 Revell 70 Boss 429 Mustang

1/48 Hasegawa D3A1 Type 99 Val

  • Member since
    August 2021
Posted by lurch on Monday, July 25, 2022 7:45 PM

That looks great. Excellent job. I like it.

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Tuesday, July 26, 2022 1:45 PM

Thanks y'all.

I may have gotten off on a tangent: I have a Tamiya LeClerc on the way.....

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, July 26, 2022 7:25 PM

Looking forward to the LeClerc. The French build some cool looking hardware. I've got an AMX-13/90 that I've bogged down on getting the camo finished. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Thursday, July 28, 2022 12:38 PM

"Cool" or just goofy? Big Smile I've got a Tamiya AMX-13 and some Friuls sitting around, waiting for some motivation and a couple of bits to make it IDF. I figured it would display well next to an M-51.

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Friday, July 29, 2022 10:29 PM

RBaer

"Cool" or just goofy? Big Smile I've got a Tamiya AMX-13 and some Friuls sitting around, waiting for some motivation and a couple of bits to make it IDF. I figured it would display well next to an M-51.

 

I dunno, it's a little odd looking but I'm not sure I'd call it goofy. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Friday, August 5, 2022 7:31 AM

I can't help but think of it as a toy tank, but I'm probably a little different..... Big Smile

Apprentice rivet counter.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Friday, August 5, 2022 9:55 AM

RBaer

I can't help but think of it as a toy tank, but I'm probably a little different..... Big Smile

 

Well it does look like an armoured car with tracks instead of wheels.

I used to hate them in World of Tanks, running around everywhere- I called them French cockroaches.

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    September 2006
  • From: Dripping Springs, TX, USA
Posted by RBaer on Saturday, August 6, 2022 9:40 AM

Gamera

 

 
RBaer

I can't help but think of it as a toy tank, but I'm probably a little different..... Big Smile

 

 

 

Well it does look like an armoured car with tracks instead of wheels.

I used to hate them in World of Tanks, running around everywhere- I called them French cockroaches.

 

That's funny. Mine will be IDF, still thinling about ordering the stuff from FC Modeltrend to make the mods, or just do it myself. 

Apprentice rivet counter.

  • Member since
    December 2002
  • From: Fort Knox
Posted by Rob Gronovius on Saturday, August 6, 2022 8:14 PM

Awesome looking wheeled "tank". These big wheels have been a favorite of mine.

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.