SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Sturmgeschütz IV (Red Army) Finished

6915 views
38 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    October 2008
  • From: Portland, Oregon
Sturmgeschütz IV (Red Army) Finished
Posted by RickLawler on Tuesday, October 14, 2008 3:21 PM

Hello FSM people, 

My name Rick Lawler, and I am new to this forum.  I've spent the past few days reading and enjoying a number of the postings - good stuff guys. 

This build is something new for me...my first with 1/48 scale.  Beginning with the Tamiya Pz. IV and also using the Hauler StuG IV conversion I will begin with this.....

I hope to end-up with this....The inspiration for the build can be found here:(Examples for Discussion Only: Armchair General) http://www.armchairgeneral.com/rkkaw...ed_SPG_img.htm

 

Work begins by replacing the Tamiya hull with the Hauler...side by side comparison..

the engine deck from the Tamiya Panzer IV must be used for the StuG...after a little cutting and sanding we are ready to go...

 

 

 

Another first for me was the application of Zimmerit. For this I used Mori Mori putty and the Model Kasten applicators..

and here it is, ready for paint...

Painting.....

 

Time to change owners....

 

 

 

And here she sits at the moment....I am now awaiting a set of WW2 Productions tracks then I'll be ready to pull it all together.

 

 

 

Thanks for taking the time to look and I look forward to meeting and getting to know you.

 

Take care,

Rick

 

 

 

 

 

  • Member since
    September 2008
  • From: North Carolina
Posted by WarHammer25 on Tuesday, October 14, 2008 3:36 PM
Wow. Great job on the conversion. It having the Russian markings on it make it even cooler and unique. Good job.Big Smile [:D]
The only easy day was yesterday - U.S. Navy Seals
  • Member since
    February 2008
  • From: Van Alstyne, Tx.
Posted by bspeed on Tuesday, October 14, 2008 4:16 PM

A great little picture article on your nice build there Mr. Lawler! Big Smile [:D]

I was getting a little worried for you though, first the Saw blade was stuck, but you got that out OK. then wondering how you were going to un-glue your paint brush from the side of the Tank Big Smile [:D]   Angel [angel]     just kidding. Tongue [:P]

  • Member since
    January 2007
Posted by the doog on Tuesday, October 14, 2008 4:50 PM

Very nice, RIck!

That's some nice zimmerit! Looks really beat up! The Russian marlings are neat, too.

A nice model all around, for sure! 

Thanks for taking the time to post a little WIP here--we need more of these, and it's nice to see your work! Big Smile [:D]

  • Member since
    March 2008
  • From: Colorado
Posted by TacoBuff on Tuesday, October 14, 2008 4:54 PM

wow, great build!  And an excellent way to say hello!  I've really enjoyed the last few 1/48th kits i've put together, and was eyeing the Pnz IV (minus the AM stuff of course).

Thanks for sharing

  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Tuesday, October 14, 2008 5:07 PM
Welcome Rick. Bravo on your 1/48 StuG IV. Don't see enough of them. I wasn't aware that Model Kasten made a zim set. Is it for use only 1/48? Look forward to more of your work.

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Tuesday, October 14, 2008 7:56 PM
Welcome to the forums Rick and a nice way to kick things off! Nice work on the conversion and "change of ownership". Thumbs Up [tup]
  • Member since
    April 2008
  • From: Canadian Prairies
Posted by caSSius on Tuesday, October 14, 2008 8:15 PM

Looks great Rick...interesting conversion and informative WIP (nice quality photos btw)...I look forward to seeing more of your stuff...Welcome!

Cheers

Brad

"Only those who will risk going too far can possibly find out how far one can go."

- T.S. Eliot

 

  • Member since
    November 2006
  • From: Coastal Maine
Posted by dupes on Thursday, October 16, 2008 8:06 AM

Rick - sweet build! Glad I found time to poach some real internet to take a look at the pics. Looking forward to the finished result. Cool [8D]

I've never heard of "mori mori" putty - who makes it? Does it have any special properties?

  • Member since
    February 2003
  • From: Long Island
Posted by Moses on Thursday, October 16, 2008 5:51 PM

Excellent work!  Love the conversion and have you inspried me to try and take on this type of project in the future.

dupes, the Mori Mori putty is  just like Tamiya's Polyester Putty and or like Bondo. 

"ZIM FIRST, ASK QUESTIONS LATER!!"
  • Member since
    July 2006
  • From: Rochester NY
Posted by mg42gunner on Thursday, October 16, 2008 10:45 PM
Wow Rick! Very nice job! The tank looks excellent, but your presentation is fantastic. I can clearly see all the steps you took in your WIP pictures, and they are all well lit and well taken. Thanks for doing that it really allowed me to see how you build step by step. Great looking tank (and zimm) too!
  • Member since
    October 2008
  • From: Portland, Oregon
Posted by RickLawler on Friday, October 17, 2008 3:29 PM

Hi guys.  First let me say thanks for a very nice welcome to the FSM forums.  Now that I have this build all caught-up, I can now continue along and post my progress....

...but first, a few loose ends - the Mori Mori putty is a two part system of a white paste then a yellow catalyst....just a touch of the catalyst allows enough working time before it sets.

 

As for the Model Kasten Zimm tools, they come with both rollers and stamps - I used the stamps.  I felt that the pattern was initially too wide for this scale, but was able to adjust by simply overlapping my columns.

So, when I last left off I had done some preliminary weathering and am still awaiting the tracks.  I will probably hold off on the final weathering until I have the tracks in place...I'll also most likely be placing this on a small base.

 In the meantime, I continue to tweak around the edges....some brushwork using MIG Productions 502 Abteilung Dark Mud and Light Mud colors...

 

 

...along with light applications of MIG pigments.  This scale is new for me so I'm definately taking my time - trying to makie sure not to overdo it.

Just a small update of continuing progress.  Hopefully my tracks arrive next week - can't wait.

 

take care,

Rick

  • Member since
    November 2005
Posted by Anonymous on Friday, October 17, 2008 3:33 PM
Wow...I missed this earlier---some freakin' nice work !
  • Member since
    November 2007
  • From: Wisconsin Rapids, WI
Posted by moose421 on Friday, October 17, 2008 9:38 PM

Sweet build Rick.  I love that you based your build off a picture.  It just gives the build that much more realism.  Where did you get the stuff that you used for the zimmerit?  Your zim looks great.

Keep up the great work and look forward to more of your builds in the future.

  • Member since
    September 2007
  • From: Relocating
Posted by Mobious on Friday, October 17, 2008 10:42 PM

 Hello,

 Rick, that's really a neat Stug IV, The zim looks great. Very well done! All in 1/48th scale, amazing.

 BR,

 Mobious

"It's a problem of applied physics" Roy Brown

  • Member since
    February 2008
  • From: ladner BC Canada
Posted by stick man on Friday, October 17, 2008 10:53 PM

WoW man nice job!! your weathering is realy good. I like how you weatheered the muffler.

Smile [:)]

I'm 15 and I model I sk8board and I drum what could be better.
  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Friday, October 17, 2008 11:21 PM
Nuttin' like a good kitbash... Well done.

  • Member since
    April 2005
  • From: Piscataway, NJ!
Posted by wing_nut on Saturday, October 18, 2008 6:09 AM
Welcome to FSM.  but don't you realize you should've have made your 1st public project here some simple OOB job in all grey!  Look at what we will come to expect from you all the time nowWhistling [:-^]Wink [;)]  Beautiful work... the bash, the zim, the camo... 1st rate.

Marc  

  • Member since
    May 2005
  • From: Dublin Rep Of Ireland
Posted by terry35 on Saturday, October 18, 2008 11:12 AM

Welcome Rick, hope to see more of your work. its great to see something different being done with german armour.

Keep up the good work.

Regards,

Terry.

  • Member since
    October 2008
  • From: Portland, Oregon
Posted by RickLawler on Saturday, October 18, 2008 1:46 PM

Thanks guys, the welcome to the forum has been very nice indeed.

 

 wing_nut wrote:
Welcome to FSM.  but don't you realize you should've have made your 1st public project here some simple OOB job in all grey!  Look at what we will come to expect from you all the time nowWhistling [:-^]Wink [;)]   .

Oh no, I didn't think of that!  Maybe we'll just call this one 'beginners luck'.Wink [;)]

 Take care all,

Rick

  • Member since
    July 2003
  • From: Perth, Western Australia
Posted by madmike on Saturday, October 18, 2008 9:59 PM

Rick

Lovely work with your 1:48 conversion. I have seen a lot of your work on Planet Armour and it is always most impressive!

Welcome to FSM

Cheers

Mike

"I do not feel obliged to believe that the same God who has endowed us with sense, reason, and intellect has intended us to forgo their use." - Galileo Galilei
  • Member since
    December 2006
  • From: N. Georgia
Posted by Jester75 on Saturday, October 18, 2008 10:05 PM
Oh man, what an awesome looking StuG!! Don't hold back on us now Rick! Every facet of his one is stunning, I love it!!

Eric

 

  • Member since
    October 2008
  • From: Portland, Oregon
Posted by RickLawler on Wednesday, October 22, 2008 3:32 PM

Hello forum folks....

After a little delay my tracks have arrived - and what NICE tracks they are!!!  I was fortunate to have William Wiseman of WW2 Productions send me this set of tracks for my use.   This is my first experience using their product, and I will report that I am very impressed.

 The tracks are very nicely cast resin, with very little clean-up required.  To assemble, simply "click" them together - that's it!  I was able to complete both runs in less than 1/2 hr.  As you can see they are totally workable, and durable.

 Now, for a small update - the tracks;

I first gave the assembled tracks a light spray of MR. Surfacer 1000 as a primer, then followed with at "dirty" grey spray of Vallejo's German Grey and US Tan as a base color, then a light wash of MIG 502 Ateilung Dark and Light mud oils.  Finally, a light drybrush of chainmail on the raised details.

Further weathering was done using MIG Productions pigments...

Small, but significant update.....onward to completion.

 Thanks for following along,

 Rick

Again, my thanks to William Wiseman and Jenny Croft for providing me with these tracks.

  • Member since
    July 2004
  • From: Texas
Posted by wbill76 on Wednesday, October 22, 2008 6:35 PM
I was wondering how long it would be before someone entered the 1/48 space with replacement tracks, looks like the WW2 Productions item is a real winner. Nice work on the weathering process so far as well. Wink [;)]
  • Member since
    October 2008
  • From: Portland, Oregon
Posted by RickLawler on Monday, October 27, 2008 2:14 PM

Hello forum friends.

Once the tracks arrived it didn't take too long to put the final touches on this little guy.  I really had quite a nice experience building my first 1/48th scale kit...I'm sure that more will follow soon --- Marder III perhaps?

 

I hope that you enjoy these final shots....

 

Thanks again for taking the time to follow along.  The entire build and companion article will featured in an upcoming issue of Military in Scale magazine.

Take care,

Rick

  • Member since
    October 2008
Posted by Hamburgular on Monday, October 27, 2008 2:34 PM
What can I say beautiful Work!
"Thats the smartest thing Ive ever heard anyone say about anything" Peter Griffin
  • Member since
    August 2008
  • From: S.W. Missouri
Posted by Pvt Mutt on Monday, October 27, 2008 3:20 PM

Wink [;)]

Greatness shines through again.Thumbs Up [tup]

..Tony the Mutt..

Shoot Low Boys They're Ridin Ponys

  • Member since
    January 2007
Posted by the doog on Monday, October 27, 2008 3:31 PM

WOW, Rick; that is truly just superb finishing!

I love the base color--I'm always promoting a much-lightened Dark Yellow base coat, as you have done here--I think it's a perfect shade! I like the whole color harmony as well; extremely well-done!

I'm guessing that you  washed the zimmerit and base coat with some MIG washes? Whistling [:-^]...Smile,Wink, & Grin [swg] It really does lay nicely in the hollows!

I just realized that his is 1/48 as well--wow, I would have never guessed! 

Thumbs Up [tup]Thumbs Up [tup]Thumbs Up [tup]!!!.........Big Smile [:D]

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in central North Carolina.
Posted by disastermaster on Monday, October 27, 2008 4:27 PM

Simply gorgeous Rick. It doesn't show at all to be 1/48. Looks real to me. Super work here.

The image “http://www.thelastsuperman.com/disastermaster/%23t1-4.jpg” cannot be displayed, because it contains errors.

 https://i.imgur.com/LjRRaV1.png

 

 

 
  • Member since
    September 2007
  • From: Relocating
Posted by Mobious on Monday, October 27, 2008 4:47 PM

 Hello,

 Nice job Rick. The zimmerit looks great and better yet it's 1/48 scale. The details in the track links are amazing. The weathering looks great too. Interesting subject done very well.Thumbs Up [tup] 

 Mobious

"It's a problem of applied physics" Roy Brown

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.