SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Project Commando - 1:35 Cadillac Gage V-100/M706

7150 views
52 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Thursday, November 7, 2024 6:14 PM

I think that will look even better in flat. 
Getting USAF vehicles "right" is a complicated dance of showing the age and wear on well-maintained vehicles that were used daily, yet never very far from their motor pools.

Of course, there is that bug-a-bear where the camera "steals" away hours of effort by not "seeing" what is actually there.

And, we few who are "here" must needs capitalize on being here.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Wednesday, November 6, 2024 4:18 PM

Hello everybody!

Cap'n - we're having an exclusive posters' club here, eh? It's good to post here from time to time to keep my mind away from politics... Thanks a lot for your kind words, I'm glad you like the colours.

John - thanks a lot!

And I'm working on the weathering... I applied the decals, some Gunze gloss on top of that and then there goes some oil dot:

1:35 M706 Commando by Pawel

That was before and after it looks something like this:

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

And the chassis looks like this:

1:35 M706 Commando by Pawel

I'm going to take it out on that finish a little more and then I' apply some clear flat, because now the finish is obnoxiously glossy...

Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    December 2002
  • From: Northern California
Posted by jeaton01 on Tuesday, October 29, 2024 12:44 AM

Looks nice, Pawel.

John

To see build logs for my models:  http://goldeneramodel.com/mymodels/mymodels.html

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Monday, October 28, 2024 7:10 PM

Pawel
I started painting the camo pattern.

That's a gorgeous paint job, love the colors.

Side note, we have three, 3! unique posts today--Huzzah!

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Monday, October 28, 2024 4:24 PM

Hello everybody!

I started painting the camo pattern. For masking I used "patafix" rolls filled with masking tape. This is how it looked like after painting and masking the first colour (sand brown) and painting the second colour (green):

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

And here's the thrilling moment - masks removed!

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

The OG came out pretty gloss - I'm going to knock that shine down with clear after applying the "effects". I also want to paint the doors' edges black to simulate the gaskets there. Interstingly, I tried to look up the instructions for all the kits of the V100 and they all don't seem to match the photos as far as the camo pattern go. My scheme is also a litle "what if" on the rear deck - hard to find references on this area...

Well, now I want to apply the decals and do some weathering. Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, October 22, 2024 4:04 PM

Hello Cap'n!

Yes, I've seen it thanks a lot!

Let me post another update to keep this place from a complete halt...

I got the doors painted on the insides now:

1:35 M706 Commando by Pawel

I made some new weld lines in the back:

1:35 M706 Commando by Pawel

And in the front I thought about how to best attach the mesh to the light guards and I decided to solder them on:

1:35 M706 Commando by Pawel

I've also added some welds around the lifting eyes in front, too. The winch compartment cover is also temporarily secured for now. I've also intalled the top armor and the fixed weapons mounts, made from the kit-supplied PE - a little simplified, but nice:

1:35 M706 Commando by Pawel

Now the plan is to temporarily fix all the doors in closed positions and paint on the 3 colour camo on that.

Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Friday, October 18, 2024 4:46 PM

Pawel
I sent you an e-mail too, did you get it?

I did, you should have an answer back by now.

 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, October 8, 2024 4:57 PM

Hello Cap'n!

Thanks a lot for your comment. I sent you an e-mail too, did you get it?

With so little being posted I feel a little like a star of the show here...

And recently I've been working on all those doors - and there are many of them! I have ordered a MMK set that has only V-100 doors - they are a separate set for a reason! And it's a nice little set and not so expensive. Here's a link to the MMK page:

www.mmk.cz/en/models/category/detailni-a-konverzni-sady

And here's how my doors turned out:

1:35 M706 Commando by Pawel

Now I want to paint them on the inside and temporarily install them closed to paint the camouflage on the vehicle. Then I'll permanently install them as open.

Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Sunday, October 6, 2024 11:45 AM

Pawel
Thanks for reading and for your comments, have a nice day

Sharp as a razor, as always.

Eyeballing recent comments It looks like I'm about the 7th person to comment on the entire FSM site in as many days.  Sigh.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Sunday, October 6, 2024 3:53 AM

Hello everybody!

Gamera - thanks a lot, it's got style ain't it?

Cap'n - yes, I'm painfully aware of that... And thanks!

And it was pointed out to me, that I need a new grill over the “duck bill” in the rear. So I drew up a new one and recently it was 3D printed for me:

1:35 M706 Commando by Pawel

After fitting it here’s how it looks like:

1:35 M706 Commando by Pawel

On the same picture you can see the radiomans top hatch, also known as the “rear gunners hatch” which is way off in the kit. The cover is too big and the opening is too small - something like that deserves a kind of trophy, doesn’t it? I’m using MMK’s door kit, but the radiomans hatch from the kit has wrong shape, so I decided to convert the kit part here. I also had to move and enlarge the opening in the kit roof and I lined the edgeswith 0,5mm copper wire.
One more photo:

1:35 M706 Commando by Pawel

Here you can also see the rear light brackets made from styrene sheet.
On the next photo are the side lower door stops that I made of copper wire. The kit parts have wrong dimensions anyway:

1:35 M706 Commando by Pawel

Out of wire I have also fabricated the front light guards:

1:35 M706 Commando by Pawel

As you can see, I like wire a lot

Thanks for reading and for your comments, have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Tuesday, September 24, 2024 4:40 PM

Pawel
Thanks for looking and have a nice day!

Looks good.

Mind, this appears to be the only thread with any activity here.  The 504 Errors are still rife, and even with only about six people per weeks commenting.

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, September 23, 2024 7:40 PM

She's lookin' good Pawel! Big, squat, and tough looking! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Saturday, September 21, 2024 3:28 PM

Hello everybody!

Cap'n - thanks a lot for your kind words!

Gamera - I always say Ilike my models to be accurate from the underside, too! Usually it's not so easy or even possible to crawl under different machines, so it's important to me to be able to show it on the model, they are good for that!

And I have my chassis almost done. I added the last parts of the steering system, including a sheet metal cover for the power steering cylinder:

1:35 M706 Commando by Pawel

Having that, I was able to put the machine on its wheels - only temporarily now:

1:35 M706 Commando by Pawel

The rims on the front wheels were a little cracked, so I repaired them with copper wire. Looking up the chassis would look like that:

1:35 M706 Commando by Pawel

I plan to add some shading and weathering later, for now I'm building the details on the top. I got a hint from "the real thing guys" that I need a better grille over the exhaust on the "duck bill". I'm trying to draw something up in 3D.

Thanks for looking and have a nice day!

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, September 17, 2024 10:15 PM

Looks good!!! 

LOL, you have a point! Never thought about putting the model on a glass shelf! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Tuesday, September 17, 2024 3:43 PM

Pawel
but how about the model I'm building? :-)

Well, when I can see it--this is the first time since about Thursday last week--it's outstanding as always.

Mind, I don't have a lot of time arund the V-100s, so every new thing is just that, brand new to me.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Monday, September 16, 2024 4:39 PM

Cap'n - that's right, but how about the model I'm building? :-)

Gamera - I keep my models in a cabinet with glass shelves and then I can take a look at the undersides. I also take them out every now and then :-)

My model display

And currently I'm havin' fun with the front suspension. I've assembled most of it:

1:35 M706 Commando by Pawel

The axle is my 3D design, reworked kit springs and scratchbuilt shock absorbers.

1:35 M706 Commando by Pawel

I've also scratchbuilt the power steering cylinder and I also have the drag link built, but it is not on the photo yet. The wheels will be shown "steered" to one side for a cooler look.

I hope to show you the photos of ready built underside soon. Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Sunday, September 15, 2024 6:52 PM

Wow that looks nice Pawel! I hope you're putting a mirror under your model or something like that so people can see all your extra work? 

I tend to spash mud and dirt all over the undersides of my armour so I don't spend much work on detailing there... Stick out tongue

 

And funny, the site was a pain last weekend when I assume the IT guys get some time off. But it's ran fine all this weekend. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Thursday, September 12, 2024 7:06 PM

Pawel
But it's true, it's tiresome how bad the forum works now. When you compare it to a forum that actually works, the difference is shocking.

And the appearance of those other fora is also a tad shocking, very text-based and "vintage 90s.

So, Kalmbach gets credit for a good-looking forum, just not one that seems to reun very well.  Yet.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, September 10, 2024 2:51 PM

Hello!

Real G - Yeah, the BRDM is a similar machine, but the Warsaw Pact used it for everything, and the R in the name is for "Razvedka" (Recon), so that's a role that the M706 wasn't meant for - not that the BRDM has any equipment that couldn't be installed on the M706.

I'm glad you like my work, thanks a lot!

Gamera - thanks a lot, I'm so glad you're still here!

But it's true, it's tiresome how bad the forum works now. When you compare it to a forum that actually works, the difference is shocking.

I'm here mainly out of sentiment for the old times, and here's another update:

I have the rear suspension done:

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

The resin wheels are from a company called MMK, the axle is my 3D print with a hole through for a reinforcement made out of brass wire to keep the axle from bending under load when it gets hot, and the shock absorbers are scratchbuilt.

And here's how the subassembly fits into the chassis:

1:35 M706 Commando by Pawel

Now more fun to come - the front suspension and the steering system!

Thanks for looking and have a nice day!

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, September 9, 2024 7:26 PM

Pawel: Continuing really nice work there- those springs are a big improvement! 

Real G: I'm still here but 2/3rds of the time I can't log on to the site. I post a little but I've gotten kinda fed up at this point. 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    May 2011
  • From: Honolulu, Hawaii
Posted by Real G on Friday, September 6, 2024 12:45 PM

That's some amazing work there Pawel!  I love the custom 3-D printed parts and the other extra detailing you are putting into the model.  And the Commando is such a neat looking vehicle, yes a lot like the BRDM.

Hey, where the heck is everybody these days?  Forum traffic is as slow as logging in!

“Ya ya ya, unicorn papoi!”

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Friday, September 6, 2024 11:49 AM

Hello everybody!

Cap'n - and how do you like the build?

Gamera, TigerII - thanks a lot for your kind words, they mean a lot to me!

And I have everything nice and smooth now:

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

As you can see I added some lugs on the rear - where the fuel can holder and pioneer tool rack would bolt to, but USAF didn't seem to use them - I guess on the airbase they would only add weight here. I have also added some missing welds on the sides. And now I can start working on the suspension.

So first I had to work on the springs. OOB they look like this:

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

And here are my tweaks:

1:35 M706 Commando by Pawel

Now I have to build new shock absorbers and their mounts, and also the bolts attaching the axles to the springs. FUN!

Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    June 2004
  • From: East Stroudsburg, PA
Posted by TigerII on Monday, September 2, 2024 9:22 PM

She is really looking good, Pawel. Good job.

Achtung Panzer! Colonel General Heinz Guderian
  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, August 26, 2024 10:03 PM

She's coming along great Pawel, sharp work! 

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Friday, August 23, 2024 5:08 PM

Pawel
I don't know how come I can post here

It's lloking like the patches were were promised to fix the 04 errors are in place.

It's still slow-as-christmas to load, and it will hang up, but, at least it's not just randomly shutting down.

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Friday, August 23, 2024 3:07 PM

Hello everybody!

I don't know how come I can post here, but since I can (maybe), let me post one more photo that I've forgotten previously:

1:35 M706 Commando by Pawel

As you can see above I will have the hull filled and sanded smooth soon, and I'm already working on the rear suspension.

Thanks for looking and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Tuesday, August 20, 2024 1:07 PM

Hello Gamera!

Thanks a lot - yeah, my vacation was nice. We were hiking in the mountains in along the Polish/Slovakian border.

And I closed up the hull. Wanted to show you how much of the interior will be visible:

1:35 M706 Commando by Pawel

1:35 M706 Commando by Pawel

I have cut off a piece of hull because it prevented me from installing the radios. Now I have to glue it back and smooth out everything, I also want to add some missing welds.

1:35 M706 Commando by Pawel

I also have the benches left to be installed. As per tip from ikar01 (Bob) the benches will be folded up, to make a room for a place to sleep (on top of the ammo boxes on the floor).

1:35 M706 Commando by Pawel

I also filled and sanded the undeside. Sonn I will be able to start all the fun with the suspension!

Thanks for reading and have a nice day!

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    June 2004
  • From: East Stroudsburg, PA
Posted by TigerII on Tuesday, August 20, 2024 12:56 PM

So far, you've done a magnificent job on the interior of this vehicle. Especially with the scratchbuilt instrument panel and the wiring.

Achtung Panzer! Colonel General Heinz Guderian
  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Monday, August 19, 2024 10:02 PM

Yeah, the wiring looks good! 

Hope you had a good vacation/holiday. 

"I dream in fire but work in clay." -Arthur Machen

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.