SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Update 2-9-2022 --- WIP Italeri 1/12 scale Alfa Romeo 8C2300 Roadster

8069 views
66 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • From: USA
Posted by keavdog on Monday, November 1, 2021 5:33 PM

Engine turned out great.  Thats the super charger on the right side - pretty cool.  I like your selection of varied metalics.

Thanks,

John

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Monday, November 1, 2021 5:09 PM

I finally finished the seat. 

Your comments and questions are always welcome.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Monday, November 1, 2021 10:33 AM

rocketman2000

I use glazing putty- works great for that kind of dimple.  The stuff does shrink a bit, so you will probably need a second application for that deep a dimple.

 

 

Thanks, I'll gibe that a try.

Your comments and questions are always welcome.

  • Member since
    June 2021
Posted by rocketman2000 on Monday, November 1, 2021 7:34 AM

I use glazing putty- works great for that kind of dimple.  The stuff does shrink a bit, so you will probably need a second application for that deep a dimple.

 

Don Stauffer in Minnesota

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Sunday, October 31, 2021 3:12 PM

Applying the faux-leather to the seat is almost finished.

The sparkplug wires are finished. I like the results. The is a lot of cool looking stuff on the right side of the engine. The engine need more dirt and oil stains.

Both sides of the rear body panel have numerous dents in them. I was thinking of using Bondo Glazing and spot Putty. I would appreciate any suggestions as to how to fix the problem. Thanks in advance.

 

Your comments and questions are always welcome.

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Thursday, October 28, 2021 12:58 PM

JohnnyK:  Working off and on in short spurts thruout the day, maybe 3-4 months.

I also managed to make the wire wheels with the spokes in the kit, came out nice. Glad I didn't have to buy them!

Chuck

Gimme a pigfoot, and a bottle of beer...

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Thursday, October 28, 2021 10:04 AM

Deleted

Your comments and questions are always welcome.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Wednesday, October 27, 2021 6:50 PM

Cadet Chuck

JohhnyK- 

Yes, my 1/8 scale model has nicely machined metal pistons, that go up and down in proper sequence when you turn the crank.  Also, the steering works, through a rack and pinion, and the brakes work, too, and the headlights turn on when you put a little metal key in the dashboard.  Amazing model!

 

So, your response begs the following question, "Ho long did it take to build that model?"

Your comments and questions are always welcome.

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Wednesday, October 27, 2021 4:44 PM

JohhnyK- 

Yes, my 1/8 scale model has nicely machined metal pistons, that go up and down in proper sequence when you turn the crank.  Also, the steering works, through a rack and pinion, and the brakes work, too, and the headlights turn on when you put a little metal key in the dashboard.  Amazing model!

Gimme a pigfoot, and a bottle of beer...

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Wednesday, October 27, 2021 12:02 PM

I'll work on the floor pan as I slowly add leather to the seat and sparkplugs to the engine. First I'll need to fill some nasty ejector pin marks. 

The ejector pin marks in the back side of the hood were also m filled with Mr. Dissolved Putty. Nasty smelling stuff.

Your comments and questions are always welcome.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Wednesday, October 27, 2021 11:57 AM

Cadet Chuck

Years ago, I built a 1/8 scale model of the same car, the kit was made in the early 70's by Pocher of italy.  Except for the scale, yours looks like the same thing, same assembly methods, etc.  I wonder if they are related?  

The 1/8 model turned out super nice, and I still have it displayed behind glass.

When they were first released in the 70's, those kits were selling for about $150.

 

Does the engine in your kit have pistons, a crankshaft and camshafts? The 1/12 engine does not.

Your comments and questions are always welcome.

  • Member since
    April 2009
  • From: Longmont, Colorado
Posted by Cadet Chuck on Wednesday, October 27, 2021 11:17 AM

Years ago, I built a 1/8 scale model of the same car, the kit was made in the early 70's by Pocher of italy.  Except for the scale, yours looks like the same thing, same assembly methods, etc.  I wonder if they are related?  

The 1/8 model turned out super nice, and I still have it displayed behind glass.

When they were first released in the 70's, those kits were selling for about $150.

Gimme a pigfoot, and a bottle of beer...

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Wednesday, October 27, 2021 5:41 AM

I'm in total agreement with Bakster. The plug wires look great and I think your choice of material for the seats was inspired.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Tuesday, October 26, 2021 5:14 PM

Really nice work JK. The seats should look awesome when done and nice work on the spark plug wiring too. Very clean build.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Tuesday, October 26, 2021 2:13 PM

 

I started working on the seat last week. The seat is molded in smooth plastic. The 1:1 car had a leather seat. I have no idea as to how to make plastic look like leather so I went to Hobby Lobby and purchase a roll of faux-leather. This stuff is ver thin and fexible, perfect for covering the plastic seat. The box art indicates a red seat, but I think that a red seat would make the car look too monochromatic, so I bought black fabric. I cut the fabric to the correct width and used Gator's Grip acrylic glue to glue the fabric to the plastic. The glue needs to dry overnight, so I can only apply one fabric strip at a time. 

The kit comes with a weird silicone tubing that is supposed to be used as spark plug wires. I did not like the look of the silicone tubing so I purchased some wire from Model Motercars. The wire is a little stiff, but it looks better than the silicone tube. I used the silicone tubing as boots. Thanks to jeffpez for suggesting that I use CA to glue the wire to the silicone. This is a slow and tedious process. 

 

 

 

 

 

Your comments and questions are always welcome.

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Monday, October 25, 2021 6:42 PM

This is a fantastic looking kit and the 1/24 engine looks like it's a part waiting to be bolted on!

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    January 2015
Posted by TheMongoose on Monday, October 25, 2021 5:23 PM

JohnnyK

I have been informed that Fernando Pinto makes and sells actual wire wheels for my model. The cost for five wire wheels is $145. That seems reasonable.   

Ha ha Big Smile they must be NICE wheels

agree with you on the dirt. the 1:1 seems to have more dried oil on it. In those days it probably leaked some all the time and got everywhere. Engine looks great!

In the pattern: Scale Shipyard's 1/48 Balao Class Sub! leaning out the list, we're down to a Monogram 1/72 SR-71 and that Tamiya P-38F/G to use the other nose art Exito Decal (in-flight for this one), & in keeping with MC's hydra theory I bought another F-5E to do in FROG camo! And I just got a Trumpeter 1/32 F/A-18F!

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Monday, October 25, 2021 3:51 PM

I have been informed that Fernando Pinto makes and sells actual wire wheels for my model. The cost for five wire wheels is $145. That seems reasonable.   

Your comments and questions are always welcome.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Monday, October 25, 2021 10:53 AM

This is a photo of the engine on a 1:1 car. It is a supercharged straight eight. 

The engine block and oil pan have really nice molded details. I added some dirt using AquaLine Brown Mud. IMHO, there isn't enough dirt. I'll add some more later. This is a large engine. Note the comparison with a 1/24 scale V8.

 

Your comments and questions are always welcome.

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Monday, October 25, 2021 10:33 AM

Tanker-Builder

Hmmmm;

 Kin I say with all good intent-AWESOME !! ?

 

Yep, the detailing on 1/12 scale kits is awesome.

Your comments and questions are always welcome.

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Sunday, October 24, 2021 7:42 AM

Hmmmm;

 Kin I say with all good intent-AWESOME !! ?

  • Member since
    July 2008
  • From: Albany, NY
Posted by jeffpez on Saturday, October 23, 2021 11:56 AM

Interesting about the mold release. I built the kit last summer and the parts were totally clean. I didn't have to wash anything. I'm really enjoying watching your progress and must say you're doing a great job. 

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Saturday, October 23, 2021 11:03 AM

I should have mentioned this earlier. The plastic parts are covered in mold release oil. There are actually black splotches of it on some of the parts. First I cleaned the parts using Simple Green. Then I washed the parts in Dawn Dishwashing detergent.

Your comments and questions are always welcome.

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Friday, October 22, 2021 8:32 PM

This kit is cool. Enjoying it.

  • Member since
    November 2018
Posted by oldermodelguy on Friday, October 22, 2021 3:32 PM

I like it ( of course I do it's within my era range of builds) !

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Friday, October 22, 2021 2:06 PM

Thanks for the kind words regarding my writing style.

 

 

It is possible to install the front axel backwards, which would cause a big problem when installing the friction shocks. You need to look at the instructions very carefully to understand which way the axel is installed. The gold arrows point at two molded screws. When the axel is glued to the springs these screws need to point toward the front of the frame. This is very easy to miss. The red arrows are pointing toward two parts that the shocks are screwed into. When the axel is glued to the springs these two parts must face toward the front of the frame. I used a screw driver from an eyeglass repair kit.

This is the finished front axel. The metal bolts add a nice touch.

The rear axel was installed without a hitch.

Your comments and questions are always welcome.

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Friday, October 22, 2021 4:49 AM

I am not an auto person, but I totally agree with Bakster. Love the way you are doing this.

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    July 2014
  • From: Franklin Wi
Posted by Bakster on Thursday, October 21, 2021 4:19 PM

Nice. Very detailed description of your work. I like that. 

Looking good. 

  • Member since
    March 2015
  • From: Close to Chicago
Posted by JohnnyK on Thursday, October 21, 2021 3:13 PM

I assembled the springs and painted the coolant pipes while I waited  for the enamel paint on the friction shocks to dry.

The springs are composed of a leaf spring, shackles and steel bolts. I added dirt and dust to the springs using AquaLine Brown Mud. The Brown Mud is water soluable and it can be reactivated after it dries by using water.

The spring shackles are attached to the frame using steel bolts. I added a drop of clear paint onto the bolt threads to prevent the nut from geting loose. Per the instructions, the frame is painted with Tamyia Mica Red. I dirtied the frame with the AquaLine Brown Mud.

The pipes were painted with Model Master Aluminum Metalizer. I buffed the paint using a paper stump. The rubber hoses were painted flat black and the clamps were painted Testors' Chrome.

 

 

 

Your comments and questions are always welcome.

dlh
  • Member since
    March 2017
  • From: Chambersburg, PA
Posted by dlh on Thursday, October 21, 2021 10:31 AM

I, too, built a Mefistofele, so I'm really interested in following this build.  I've had my eye on it for a while.

Dave

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.