SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Looking for Tips on Tire Lettering

1720 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
Posted by Anonymous on Wednesday, May 14, 2003 2:22 PM
All good tips! I was thinking of trying a paint pen, but I don't know how fine the tips are. I hadn't thought about a gel pen or correction pen. The chalk sound like a good idea also. I'll have to give some of these a try and see which works best. Thanks guys.
  • Member since
    November 2005
Posted by Anonymous on Wednesday, May 14, 2003 3:38 AM
I have had some luck using a Presto Correction pen with the fine point. This is liquid white out, when done spray an overcoat of flat-coat.
  • Member since
    February 2003
  • From: East Bethel, MN
Posted by midnightprowler on Tuesday, May 13, 2003 4:22 PM
I use a fine white gel pen. Works quite well.
Lee

Hi, I am Lee, I am a plastiholic.

Co. A, 682 Engineers, Ltchfield, MN, 1980-1986

1 Thessalonians 4:13-18 1 Corinthians 15:51-54

Ask me about Speedway Decals

  • Member since
    November 2005
Posted by Anonymous on Tuesday, May 13, 2003 2:18 PM
I've heard lots of methods, but there's only a couple that work for me:

1. I use a piece of white chalk pastel that has been sharpened in a pencil sharpener. You can pick out the lettering quite easily, and any mistakes can be wiped away with a brush dipped in alcohol). Blow the dust off and then spray with flat-coat overtop. This method gives me the best results.

2. I've also had moderate success by putting some white paint on an index card or a post-it note. I then 'dab' the raised lettering in the white paint. It's a bit of a hit-and-miss technique, but when it works, it works fairly well. The biggest challenge is getting the right amount of paint onto the card. Too much will just make a mess and too little won't leave a good impression.

3. If you're trying to paint the letters in with a brush, I'd suggest a couple of things:
a. Use a magnifying glass of some sort. You will have much more control.
b. Use a brush that has long, thin hairs (I think they're called 'liner' brushes?). They hold a good amount of paint and really work well for this type of work.

Good luck.

M.
  • Member since
    November 2005
Looking for Tips on Tire Lettering
Posted by Anonymous on Tuesday, May 13, 2003 1:54 PM
Does anybody have some tips or tricks for painting the raised white letters on tires? I tried using a brush, but the finished product looks bad. I am trying to find a better way.
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.