SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

1970 Z-28 Camaro-Completed-Glamour Shots 09/13

9607 views
89 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, September 13, 2022 6:14 AM

MR TOM SCHRY

WOW!  I wish that I could think of something original to say but I can't.  I agree with everything that everyone has said about this beautiful build.  This deserves a first place award in every contest that it is entered in.  Even though I don't build a lot of car models, this is a goal for me to work towards.

tjs

 

Thanks Tom!! I started back into this hobby 12 years ago building WWII aircraft (which I still do on occasion) but switch mainly to autos in 2014 because my weakness was glossy paint finishes. It took me a while to get a method down that worked for me but once I found it was if I finally broke through a barrier. The next hurdles I want to tackle is to build an armor subject that looks the part and then to conquer figure painting.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, September 13, 2022 7:08 AM

Well gang....after 3 months I've finished this puppy up. I'm going to put together a small re-cap of the trouble points with this kit in a separate thread for anyone that wnats to build one of these. I will say that in the kit reviews that I watched along with what I read before starting on this build, it says to build the subframe up front separately and install it after the base chassis has been installed into the body (which was no small feat onthis model. At several points I thought I was going to break something big trying to get the body and chassis together. 

  I've had this model in my stash for around 8 years and have always wanted to build one because I like this body style so much. I was gonna have one of these for my first car to drive before dad saw the well-built 350 in it with a 4-speed and put a stop to that. He used to tell me, "If you're gonna kill yourself .....you aint gonna do it under my roof". :giggles:

If you've been in Hobby Lobby, you've seen this kit a thousand times on the shelves.

 See the source image

Most of the cars that I saw were yellow, green, brown, black...etc. I wanted something different. I wanted red.....but not just any red...something that was out of the ordinary and magnetic to the eyes. My choice ended up being Raspberry Red. I fell in love with this car the second that I saw it.....

Image

Now for the look that I was after. The stock wheels and tires look alright but I wanted something a bit more aggressive in regards to wheels/ tires and wanted to drop the front stance and raise the rear just enought to get the "meats" I had in mind to look how I wanted. I had parts from 3 different kits to make the wheel & tire choices.

Image

Other parts used throughout the build were the 1970-1/2 Z/28 PE fret from Model Car Garage for the engine, interior and exterior details. Magazine in the front seat was from a supplier on Ebay years ago and decals are from Speedway for the license plate. MCW supplied the Raspberry Red and Testors Wet Look was used for the clear coat. A light coat of Tamiya Smoke went on the wheels to give them a more realistic look and to bring out the details. The kit fought me some but wasn't too bad to build thanks to reading reviews and looking over build threads from other folks who have built this same car. Thanks go out to all who looked in on and encouraged me along the way.



Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

 

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    May 2013
  • From: Indiana, USA
Posted by Greg on Tuesday, September 13, 2022 7:56 AM

She's a beauty, Joe. YesYesYes

  • Member since
    August 2009
  • From: MOAB, UTAH
Posted by JOE RIX on Tuesday, September 13, 2022 8:03 AM

That is one beautiful and amazing Camaro Joe. What an absolute tribute to your fantastic skills. It has, as always, been a thrill to watch you you build this. Not only do you have this auto building down to a fine art I'm impressed that you knocked this out in 3 months. 

Well done My Friend and Thank You forr yet another wonderful journey.

"Not only do I not know what's going on, I wouldn't know what to do about it if I did". George Carlin

  • Member since
    August 2021
Posted by lurch on Tuesday, September 13, 2022 8:41 AM

WOW that lookd fantastic. Great color choice. The mag on the seat is a great feature as well.

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Tuesday, September 13, 2022 8:46 AM

Geez!

           I went to a car show Saturday.  There wasn't one Camaro of that year there, that was a beautiful as this one! Darned fine job , my Friend!! I like the subtle touches in the passenger seat!

  • Member since
    June 2014
Posted by BrandonK on Tuesday, September 13, 2022 9:27 AM

Awesome sauce!! Beautiful build again. You nailed the look and stance. Perfect.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Wednesday, September 14, 2022 5:27 AM

Thanks you guys. I really do appreciate all the comments. 

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    November 2018
Posted by oldermodelguy on Wednesday, September 14, 2022 5:39 AM

Looking good !!

fox
  • Member since
    January 2007
  • From: Narvon, Pa.
Posted by fox on Wednesday, September 14, 2022 9:06 PM

O U T S T A N D I N G work Joe! Toast Toast Toast

Jim Captain

Stay Safe.

 Main WIP: 

   On the Bench: Artesania Latina  (aka) Artists in the Latrine 1/75 Bluenose II

I keep hitting "escape", but I'm still here.

  • Member since
    December 2008
  • From: UK
Posted by PatW on Thursday, September 15, 2022 2:29 AM

Superb mustang1989.

Remember , common sense is not common.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, September 23, 2022 6:29 AM

Thanks oldermodeler guy, Jim and Pat. {y}

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    July 2015
Posted by MR TOM SCHRY on Friday, September 23, 2022 7:30 AM

SWEET ride!  Every teen age boy's dream car!  The split bumper Camaro, in my opinion, was the best looking Camaro.

tjs

TJS

  • Member since
    September 2022
  • From: South Carolina
Posted by Omni Yomni on Friday, September 23, 2022 6:25 PM

Fantastic work, especially on the paint. I have one or two of these in the stash myself, will have to try some MCW paint. Great interior, too. The floor mats and scaled down magazine are great touches. Thanks for showing this.

  • Member since
    September 2022
  • From: South Carolina
Posted by Omni Yomni on Friday, September 23, 2022 6:26 PM

MR TOM SCHRY

SWEET ride!  Every teen age boy's dream car!  The split bumper Camaro, in my opinion, was the best looking Camaro.

tjs

 

Same here.

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Saturday, October 1, 2022 7:09 AM

Thanks fellas for the comments. Circle track racers gobbled up most of these cars so there aren't many left out there and those that are still out there are priced very high. Hopefully one day I'll have one.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    September 2014
Posted by rooster513 on Saturday, October 1, 2022 5:34 PM

That is REALLY nice! That first pic looks like the real thingYes

-Andy

  • Member since
    July 2003
  • From: On my kitchen counter top somewhere in North Carolina.
Posted by disastermaster on Saturday, October 1, 2022 8:48 PM

GODAWESOME!

Sherman-Jumbo-1945

"I was so much older then, I'm younger than that now"

 

 
  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Tuesday, October 4, 2022 7:31 AM

Thank you so much Andy and DM! Really appreciate the very kind comments.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Tuesday, October 4, 2022 8:01 AM

How did I miss the reveal???  Looks awesome Joe.  Love the details and finish and the big meats out back.  Well done.

Thanks,

John

  • Member since
    February 2003
  • From: Between LA and OC, SoCal
Posted by oortiz10 on Tuesday, October 4, 2022 9:39 PM

Love it! My first car was a 70 split-bumper 327 (Or was it a 307?) RS. I have AMT's 70 Camaro that I want to build up like my old pony. Hopefully it will come out half as nice as yours. Great work!

-O

-It's Omar, but they call me "O".

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Wednesday, October 5, 2022 7:07 PM

Thanks alot John and Omar! 

 

I think it was the 307 Omar. A 327 would've been nice though.....frickin' screamers.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    August 2007
  • From: back country of SO-CAL, at the birth place of Naval Aviation
Posted by DUSTER on Wednesday, October 5, 2022 11:03 PM

 

Sorry Joe but I was asleep for the last couple of months and missed this entire thing. But now that read all the thread and caught up to you at this stage I’ll just say WOW!  Most impressive and a Great color.
 Sooo I guess you could say you can now “give the raspberry to"   the other modelers-eh?   Confused---I’m so old, sigh

 

 

Steve

Building the perfect model---just not quite yet  Confused

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Saturday, October 8, 2022 9:02 AM

LOL! Thanks Steve! I appreciate the very kind (and funny) comments ol' buddy.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    July 2009
  • From: North Carolina
Posted by Back to the bench on Sunday, October 16, 2022 11:45 AM

Truly an outstanding build of a car that I have always dreamt of owning, right down to the color.

For lack of better words this has to be one of the cleanest and most precise builds I have seen in a very long time. I have learned over time that if I think I've "got it right" all I have to do is take a few close up photos. Then when looked at on the monitor the mold lines, sink marks, paint goobers, dust etc. just stick out like a sore thumb. I see none of that in your photos (which are excellent by the way) and that is tough to achieve. Thanks for sharing your build process and the outstanding result, and apologees for being so late with a comment.

Gil

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, November 25, 2022 6:21 AM

Back to the bench

Truly an outstanding build of a car that I have always dreamt of owning, right down to the color.

For lack of better words this has to be one of the cleanest and most precise builds I have seen in a very long time. I have learned over time that if I think I've "got it right" all I have to do is take a few close up photos. Then when looked at on the monitor the mold lines, sink marks, paint goobers, dust etc. just stick out like a sore thumb. I see none of that in your photos (which are excellent by the way) and that is tough to achieve. Thanks for sharing your build process and the outstanding result, and apologees for being so late with a comment.

 

Gil, thanks alot man. Taking photos is one of the tools that I use to get the best outcome I can with builds. My weakness is modeling is being close the finish line with any given model build. It seems like when the end is near is when I start getting anxious and "shortcutting" to see it all finished. I've learned that I have to harness myself when I'm getting close to the end and just take my time. That started happening with this one and I had to go back and re-do the rear bumper and a couple of other things to make them right. 

Sorry for the late response. Thanks again.  

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    January 2010
Posted by CrashTestDummy on Friday, December 2, 2022 9:45 AM

Beautiful ride!  Just make sure you get it inspected before driving it on the street!  Surprise

G. Beaird,

Pearland, Texas

  • Member since
    May 2022
Posted by Eugene Rowe on Friday, December 2, 2022 1:55 PM

Did a really great job on it looks real!

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Saturday, December 10, 2022 5:54 PM

Thanks G! Aw dang it....I forgot about that!! 

Gene: 'Preciate the comments bud.

                   

 Forum | Modelers Social Club Forum (proboards.com) 

  • Member since
    December 2022
Posted by orion619 on Thursday, December 29, 2022 10:56 PM

WOW! That is an incredible build. I am currently building the same kit. It's been about 40 years between builds for me. As I'm recently retired I thought I might get back into the hobby. I chose this kit because my very first car was a RED 1970 Camaro. Not a Z-28 though. Mine had a 307. I was a junior in HS in 1975. I had many great memories in that car. I just hope my build is half as good as yours.

 

Cheers

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.