SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Trumpeter 1/350 USS Hornet CV-8 Doolittle Raid

10797 views
75 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    January 2015
Posted by TheMongoose on Saturday, November 27, 2021 2:56 PM

The whole thing looks great. My favorite is the hangar bay. What a glorious display!

In the pattern: Lindberg's 1/48 Snark and Scale Shipyard's 1/48 Balao Class Sub! Started my Prince of Wales for the Ships of the British Flag GB...oh and I bought another P-38F/G to use the other nose art Exito Decal (in-flight for this one), & in keeping with MC's hydra theory I bought another F-5E to do in FROG camo!

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, November 27, 2021 9:11 AM
Week 22 – Starting at the stern I added more details. I added some crew members, the fantail launch, and the mooring rope winch on the starboard side. I used some 50lbs test braided fishing line for the mooring rope and coiled it around the winch spool. The kit does not provide an actual spot to hold the launch so I scratch built the cradle that holds the launch. I then started making the eight 5” dual-purpose guns. The kit gun mounts had a couple of issues. First the kit parts lacked detail and the gun barrels were more like 10” barrels. I cut off the barrels and replaced them with Aber brass barrels. I then added the photo etch details to provide a more accurate look.
Moving on I am now working on the catwalks. Since I am doing an “At Sea” display I used the full hull lower section as a placement guide. With the photo etch catwalk set from White Ensign there are sections that are replaced. The kit shields that go around the .50 caliber guns are too short and thick. These are cut off and replaced with photo etch versions. I started on the aft starboard side. I am working may way along the starboard side first. For the midship catwalk I added some empty reels that sit just under the catwalk. There are also small platforms that require railings added as well. Once the catwalks are done I will detail the bow and then begin detailing the underside of the flight deck.
See all the photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/
 
 
 
 
 
 
 
 
 
 
 
 
 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    March 2005
  • From: West Virginia, USA
Posted by mfsob on Saturday, November 20, 2021 12:53 PM

Wolfman_63

I also purchased 120 3-D printed crew figures. These were bought on Shapeways by member Holder8702 on his Panzer vs. Tanks page. The Tamiya crew members will be used mostly on the hangar deck and the 3-D printed will mostly be on the flight deck and island. I will not be using the Eduard set. The photo etch came painted but they are too thin to look real. The Tamiya figures are thicker but only have basic details See the photo below where I compare a saluting crew member between all 3 sets.

I decided awhile ago that 1/700 is about the limit for PE crew figures. At that scale, they're so small that even a little thickened super glue bulks them up enough - although trying to pose the little guys is, well, challenging.

I've tried some of the 3-D printed and resin 1/700 figures. No real luck with the resin ones, you break as many as you save, but the 3-D ones are almost worth the effort. Except for the hideous cost.

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Saturday, November 20, 2021 12:09 PM

Wow - that looks increadible.  You are a PE master!  Those hose reels sure look better than the kit parts.  The pic at the angle that clearly shows all the rigging is pretty darn impressive.

Thanks,

John

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, November 20, 2021 5:57 AM
Here we are at week 21 of the USS Hornet “Doolittle Raid” project. This week I was able to complete the island. All 34 lines of the rigging have been mounted. Once the rigging was completed I then painted the camouflage on the island using the photo references in the Hornet book. The pattern that the kit shows and what were actually on the ship differs slightly. The lines have a slight shift when they reach the catwalk half way up the island on the actual ship. I then finished the 4 quad AA guns used on the flight deck. I was looking over the flight deck assembly and decided to detail the hull next. This is being done as the catwalks that go around the hull for the flight deck need to be installed and painted before placing the flight deck on. Since all the catwalks are photo etch I filled all the mounting holes for the kit catwalks with putty. I then started at the stern I added the edge railing and worked on the second deck. This has three hose reels on it. The kit has cutouts for the kit reels. I filled these in with putty and then assembled the photo etch versions of the reels. I used black 6lbs test braided fishing line for the hoses. I used three layers of line on each reel. Need to research the rails and stairs on the stern then onto the catwalks.
See all the photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/
 
 
 
 
 
 
 
 
 
 
 
 
 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, November 13, 2021 12:46 PM

Yes, I have been working on that already. Once the rigging is done the camo will go on.

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    September 2012
Posted by GMorrison on Saturday, November 13, 2021 10:26 AM

Fine work.

Might I suggest you think about how you will do the camouflage on the island soon?

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    April 2015
Posted by Wolfman_63 on Friday, November 12, 2021 4:11 PM
Here we are at the 20th Week of the USS Hornet “Doolittle Raid” project! I am still working on island details. As I was researching all the rigging I found more details that I needed to add to the island. I found out that there are three whip antennas on the island. Two of them are on the funnel cap with rails and one on the aft end of the island. I scratch built these using photo etch and styrene rod for the base. I began attaching the first layer of rigging for the forward mast. I am using EZ-Line black fine for the rigging. With the lines attached on the one end I let the CA glue cure for a while before starting to attach the other end.
While the rigging was curing I started looking at the quad 1.1” anti-aircraft guns that sit on the flight deck. I assembled the kit version just to see how they look. They are very plain looking and seem too small for the scale. I then built up the photo etch version. They looked better but being photo etch they seemed too thin. I then decided to use a mix of the kit parts, Photo etch parts, and Aber 1/350 1.1” brass barrels for them. Using the “body” of the guns from the kit I installed the brass barrels and then installed the photo etch mount, seats, gun sights, and ammunition feed boxes. 
I moved back to the rigging and started with the aft mast. One of the things I needed to add was the mount for the flag.  I used some more photo etch scraps to make the mount. I am continuing with the rigging. It looks like there are going to be three sections, the forward main mast, the aft mast, and then the rigging that goes between the masts. All told there are roughly 20 individual lines that need to be added and routed. Once the rigging is finished I will do some touch up with the base color then add the camouflage color and finally the crew that will be placed on the island.
 
See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/
 
 
 
 
 
 
 
 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    September 2012
Posted by GMorrison on Saturday, November 6, 2021 1:36 PM

I've always thought that the blue was 5-S but I haven't researched much beyond Snyder and short.

Gators Masks made a really nice masking set for this kit but I think he went out of business.

 

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, November 6, 2021 6:31 AM
Week 19 – Work was slowed a little this week as I had the laptop I use for making decals started to die and needed to be replaced. I spent a couple of evenings changing over to a new laptop. Turning back to working on the project I added some more details to the island. There are smaller search lights around the island which have been included with the photo etch set. One of the kit search lights on the aft side of the island mounts to the deck. However after review of the photos it is actually mounted on a raised platform. I scratch built the platform and mounted the search light. I also used the photo etch SK antenna rather than the plain looking kit version.
Next I started on the masts. I started by removing the molded ladders and added photo etch details. The aft mast spars were detailed and set aside. The main mast needed a lot more work. Comparing the kit mast and the photo etch parts there were still a lot of details missing. To start with I added the hatch and ladder to go between the two platforms. Next was the top platform in the photos has a small extension on the forward side as well as mounts for rigging. I was able to locate some photo etch pieces in my spares bin to replicate these. Next were two large spot lights. The photo etch set had the face covers. I used a sprue tree the same diameter and then some spare photo etch parts to make the mounts for them. I then started painting the island and main mast.
Speaking of paint, after some research I found out the paint scheme is three colors not two as the kit instructions show. The island is haze grey with ocean grey camouflage. Below the flight deck the hull is ocean grey and navy blue camo. I chose to use the Scale Colors paint for this scheme. I am using SC004 5-H Haze Grey, SC003 5-O Ocean Grey, and SC002 5-N Navy Blue. This is the first time I am using this brand of paint.
I need to finish some details on the aft mast then finish assembling the island to start the tedious task of doing all the rigging.
See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/
 
 
 
 
 
 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, October 30, 2021 3:16 AM

Yes, This is being built as it was during the Doolittle Raid. All B-25B's will be on deck

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    January 2015
  • From: Tumwater, WA.
Posted by M. Brindos on Saturday, October 30, 2021 2:27 AM

This is fantastic!

Any plans on loading the deck with B25's? 

- Mike Brindos

Figure Painting Moderator -- Genessis-Models

  • Member since
    February 2018
  • From: North Carolina, USA
Posted by Model Monkey on Friday, October 29, 2021 6:36 PM

Great work, David!  Enjoying your build. The lighting is superb.

  • Member since
    April 2015
Posted by Wolfman_63 on Friday, October 29, 2021 3:27 PM
Welcome to week 18 on the Trumpeter 1/350 USS Hornet project. This week was spent detailing the gun directors and the island. On the gun directors I first removed the molded “blocks” that represented the door and hatch. These were replaced with photo etch pieces. I then used the photo etch for the antenna and mount.
Switching over to the island I removed the molded porthole covers form the bridge and replaced them with the photo etch parts. The photo etch parts have the slots in them where the kit ones did not have them. I then started on the starboard side of the island. After reviewing the photos in the reference book I found that the three “portholes” near the top of the island are actually vents. I filled the portholes with putty then used a small styrene tube and cut an angle on them and installed them over the previously filled holes. There are also a couple of ducts and a storage bin mounted to the railing. After digging through my stash of extra photo etch parts I found a few items to scratch build a platform that has a cabinet attached to it. Not sure what its purpose is but I detailed it to match the reference photos.
I will next be detailing the port side of the island. I have already added the hose reels and some small rail sections. It takes al lot of time comparing the model island to the reference photos. Each time I find another small detail that is missing on the kit version. I still have the masts and rigging to do as well.
See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/
 
 
 
 
 
 
 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    April 2015
Posted by Wolfman_63 on Friday, October 22, 2021 2:12 PM

 

Week 17 on the USS Hornet was more work on the island. I mounted the LED’s in the main part of the island and verified the effect I am looking for worked and it did. I then started working on the catwalks and rails. As I was working on them and checking the photos I noticed the catwalks were grated not solid. I then looked over the many accessories and found that I purchased the White Ensign Models Catwalks Set. I thought it was just the catwalks around the ship but then found out it includes the island catwalks! I then removed the kit catwalks, filled the mounting holes and started mounting the photo etch versions. These look a lot better and appear to be sized correctly. The kit ones looked a little thinner width wise.

 There are two large search lights on each side of the island. These are molded in the kit gray. I decided to make them look more realistic. I took a drill bit the diameter of the search light lens. Drilling into it create a concave divot. This was then painted with chrome silver. I finally covered it with a round clear lens I located in my spare bin.

 I then cut off the molded area on the aft side of the island that represents the stairwell. This was replaced with numerous photo etch parts. I am working on the port side island catwalk replacement now then I will work my way up to the masts.

 See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    April 2015
Posted by Wolfman_63 on Sunday, October 17, 2021 4:00 AM

Bridge used white lights during daylight, red at night. Hangar bay doors were only open during day or in port. As for the model, The island lights will be toned down (dimmed) when doing final wiring in the hull.

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Saturday, October 16, 2021 5:49 PM

Wolfman_63
The bridge is divided into two sections so I used two PICO sized LED’s to light it up.

Small point of order--Navigation bridges are kept dark--else you can't see out the windows.

PriFly and similar Deck Observation bridges will be under red illumination at night.

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, October 16, 2021 8:34 AM

 

Moving right along for week 16 of the USS Hornet project I have finished installing the hangar deck lights. To get the effect of multiple lights I staggered them from each side. All the wiring was routed to the section under the island so the wiring can be run to the bottom of the hull. With the hangar deck finished I started working on the island.

 

I first drilled out all the portholes and windows. The windows on the bridge were then filled with acrylic gel to simulate the glass. The bridge is divided into two sections so I used two PICO sized LED’s to light it up. The rest of the island is illuminated with two 5mm LED’s.  I then drilled out the funnel caps and replaced them with the photo etch details.

 

Over the next week I will be detailing the island so I can install it on the flight deck as one assembly. This is needed so I can run the wiring into the hull.

 

 

 

See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    July 2015
Posted by MR TOM SCHRY on Saturday, October 9, 2021 8:44 PM

Awesome progress on this build.  Your work inspires me to do the best work that I can do and it motivates me to get off of my computer and get back to my workbench.

TJS

TJS

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, October 9, 2021 9:10 AM

 

This is week 15 on the USS Hornet project. I spent most of the week figuring out the light placement and how to route all the wiring. Looks like I will be running a total of 18 LED’s for the hangar deck. For the section between the rear elevator to the mid-ship elevator I have 8 of the NANO size LED’s. These are the “Warm White” color. Placing them on alternate sides and staggering them gives me the best effect. Placing the LED’s is a slow process. I first started by placing the LED into the location and attaching it using acrylic gel. Once the gel is cured I then route the wire and use the gel to hold the in place.

 

When you look at the photos don’t worry about the girders being bent/warped. Feeding the LED’s and routing the wire causes them to distort as they are handled while feeding the wires and LED’s thru them.  I am going to wait until I am ready to install the flight deck before I straighten them. The wires are being routed to the section under the island. Later I will join these with the wiring from the island and run the wires into the bottom of the hull.

 

Since it takes time for the gel to cure, I stated looking at the island. Since I plan on lighting it as well I drilled out all the port holes and windows on the on it. For the square widow I used a square file. It looks like the bridge has two sections so I will need 2 NANO LED’s. I then need to figure out which LED’s and where to place them inside the main part of the island to give even lighting thru all the port holes. The last of the hangar LED’s are curing now. I then need to do some painting and touch-ups on the wiring to blend them with the hangar deck. Once that is done, I then need to look at the flight deck and prepare it for the wooden flight deck. This will be the first time I will be doing a wooden deck on a model.

 

See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    April 2015
Posted by Wolfman_63 on Saturday, October 2, 2021 11:38 AM

 

This week on the USS Hornet project I was able to paint many figures and get them placed around the hangar deck. I used mostly the Tamiya figures with a few of the 3-D printed figures. One of the 3-D printed figures was in a seated position so he is now driving a Moto-tug. Another was kneeling so he is working on a dauntless SBD’s dive brakes. The last one I used was one posed walking up a ladder. The rest of the 3-D printed will populate the flight deck and island. With figures placed, I paced all the aircraft back in the hangar and added a few more figures, more moto-tugs, and the weapons carts near the weapons elevator. I then installed the aft girder assembly. This has turned into a slow process. One side needs to be attached and cured before attaching the other side. This is needed to keep the girders straight. I then placed some of the SBD’s in the girders.

 

With the girders in place I started mapping out where the lighting will go and how to route the wiring for the aft section of the hangar for illumination. I am currently working on the forward section of girders now.

 

See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    November 2005
  • From: Formerly Bryan, now Arlington, Texas
Posted by CapnMac82 on Sunday, September 26, 2021 2:25 PM

Wolfman_63
I then started squeezing all the aircraft on the hangar deck.

That looks like the crowded conditions that probably were required.

There's never enough room.

Doing one incredile job despite the constraints.

  • Member since
    July 2013
Posted by steve5 on Saturday, September 25, 2021 7:58 PM

very impressive work wolfman . need you to give me some tips on PE work .

 

  • Member since
    April 2015
Posted by Wolfman_63 on Friday, September 24, 2021 4:13 PM

No I cannot. I will run the wires seperate and in styrene tubes to match cables and pipes that are on the actual ship photos.

 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Friday, September 24, 2021 4:03 PM

Just fantastic!

Thanks,

John

  • Member since
    September 2012
Posted by GMorrison on Friday, September 24, 2021 3:53 PM

Can you use the girder assemblies as conductors for the LEDs?

Bill

 Modeling is an excuse to buy books.

 

  • Member since
    March 2012
  • From: Corpus Christi, Tx
Posted by mustang1989 on Friday, September 24, 2021 2:36 PM

The detail you're throwing at this thing is just jaw dropping. Un.....believeable man.

                   

 

  • Member since
    April 2015
Posted by Wolfman_63 on Friday, September 24, 2021 2:20 PM

 

The SBD’s of Bombing 8 for the USS Hornet have been completed! I completed the detail painting then applied all he decals then attached the propellers. I scratch built a rack to hold the propellers and added a bunch of them on the rack. I then started squeezing all the aircraft on the hangar deck. I added a couple more moto-tugs and placed the torpedo and bomb carts near the weapons elevator. I then laid out all the under deck girders. At first I tried using CA glue but with the size and length of the assembly then kept breaking loose. So I decided to solder them together. This worked a lot better. I made two assemblies. The assemblies are separated by the mid-ship elevator. I taped everything into place an measured the room available. There is a lot less room than I originally thought. I would need about 0.6mm of space but I only have about 0.15mm of space. This coupled with the thickness of the hangar walls it looks like I will not be able to add the fiber optic lines for each light.

 

There is just no room for the estimated 14 feet of fiber optic lines. So I will be moving on to plan B. Instead of fiber optic lighting I am just going to use Nano sized LED’s. These will be placed in the girders throughout the hangar deck.

 

With the girder assemblies built, I need to attach the aircraft and other details into the hangar deck. One of the things I need is the crew. So I will start off with the accessories I bought. I have a set of Eduard photo etch crew figures that I bought a few years ago when I was getting accessories for a different project. I ended up not using them back then. For this project I bought the Tamiya crew set which has 144 figures in 6 different poses. I also purchased 120 3-D printed crew figures. These were bought on Shapeways by member Holder8702 on his Panzer vs. Tanks page. The Tamiya crew members will be used mostly on the hangar deck and the 3-D printed will mostly be on the flight deck and island. I will not be using the Eduard set. The photo etch came painted but they are too thin to look real. The Tamiya figures are thicker but only have basic details See the photo below where I compare a saluting crew member between all 3 sets. I have lots of fine detail painting and mapping out where they will be placed to get accomplished before I can move on to the lighting.

 

See more photos and details from the start in my build log at https://davidsscalemodels.com/build-log/1-350-uss-hornet-cv-8-doolittle-raid/

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Website:

David's Scale Models - https://www.davidsscalemodels.com

 

 

 

 

 

  • Member since
    January 2015
Posted by TheMongoose on Friday, September 17, 2021 6:44 AM

Ohh this really looks good. Those dive brakes down are so impressive in this scale. Nice work!

In the pattern: Lindberg's 1/48 Snark and Scale Shipyard's 1/48 Balao Class Sub! Started my Prince of Wales for the Ships of the British Flag GB...oh and I bought another P-38F/G to use the other nose art Exito Decal (in-flight for this one), & in keeping with MC's hydra theory I bought another F-5E to do in FROG camo!

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.