SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Photos of My 1/48 Mercury-Redstone (MR3)

9970 views
18 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    December 2010
Photos of My 1/48 Mercury-Redstone (MR3)
Posted by Phillip1 on Tuesday, July 5, 2011 9:32 PM

Fellow Modelers,

Attached are photos of my 1/48 Mercury-Redstone built in 1997.  The assembly uses parts of two Glenco Jupiter boosters and one Revell Mercury capsule.  Both kits are excellent and made project not too difficult, although alot of small modifications were required.  The most modfifications were made to the instrument section (i.e. black and white striped section) and the capsule itself.  A key part of this project was using David Week's scale drawing set.  David is one of the best space modeler's in the country, and his drawing set removed any guesswork concerning the details.  I hope you enjoy the photos.

Thanks

Phillip1

 

 

 

 

 

 

  • Member since
    August 2009
  • From: Borlando Fla home of the rat
Posted by TREYZX10R on Tuesday, July 5, 2011 9:43 PM

Great looking build Phillip,very nicely done!

WZ2
  • Member since
    November 2009
Posted by WZ2 on Wednesday, July 6, 2011 7:34 PM

Wow, VERY nice!

 

Chris

  • Member since
    March 2003
  • From: Towson MD
Posted by gregbale on Friday, July 8, 2011 9:07 AM

Truly awesome job! I've had the two Glencoe boosters and the old Mercury/Gemini set in the stash for years, but still haven't gotten around to it.

Did you use AM decals? I've got the Space Model Systems set, and, if that's what you used, how'd they go down?

Regards

Greg

Greg

George Lewis:

"Every time you correct me on my grammar I love you a little fewer."
 
  • Member since
    December 2010
Posted by Phillip1 on Thursday, July 14, 2011 9:56 AM

Thanks for the compliments. 

 

Greg-I did not use AM decals on this project so I cannot give an opinion on them.  When I built this project in 1997 there were not many aftermarket accessories (parts or decals).  The only aftermarket decals used were the red “UNITED STATES” and black “MR7” logos.  These came from NEW WARE on a sheet containing decals for multiple rockets.  All of the lettering on the capsule came from a SuperScale White Letter/Number sheet.  The black stripes on the instrument section were cut to size from a SuperScale Black Film sheet.  All of the other decals were from my decals “spares” box and were cut to the size and shape needed.  Pieces of black decal film were also used where the black and white colors meet to make the demarcation line super sharp.

 

Thanks

 

Phillip1

 

  • Member since
    March 2010
  • From: Democratic Peoples Republic of Illinois
Posted by Hercmech on Thursday, July 14, 2011 10:06 AM

Very Nice build!


13151015

  • Member since
    August 2011
Posted by tracy.net on Sunday, August 14, 2011 9:01 PM

Hi, Fantastic buildup!  Would like you to go into a little more detail on this build up such as how you did the adapter ring and clamps for the capsule,  and the fill nossiles on the lower booster.  Toast

  • Member since
    December 2010
Posted by Phillip1 on Friday, August 19, 2011 12:24 PM

tracy.net,

Thanks for the compliment.  The fuel drain/fill connections were easy.  3/16" holes were drilled into the lower section, then thin, square pieces of sytrene were glued inside to cover the holes.  A couple of small, round styrene pieces were then added inside the holes I drilled.  I had some really good close-up photos of a Redstone rocket I had taken in a museum, but the detail is really simple and required no special "shaping".  This is a detail that looks impressive, but there's not much to it.  The adapter ring was harder and alot more work.  I started by gluing three .040" pieces of sytrene stacked together.  I drew the required booster diameter on one side and the required capsule diamater on the other.  Then it became a trial and error excercise of  "sand and test fit" the three sections until the fit was perfect.  The other added details (umbilical fairings, etc) were simple shapes cut from miscellaneous styrene.  The most challenging part was making sure multple, duplicate parts all looked the same.  An article on building this model was published in the May 2001 issue of Fine Scale Modeler.  If you can get a copy there are some good work-in-progress photos.  If you are not able to get a copy let me know and the article can be scanned and sent to you.

Thanks

Phillip1

  • Member since
    February 2003
  • From: Allentown, PA
Posted by BaBill212 on Friday, August 19, 2011 12:40 PM

Wow Phillip,, that is awesome! An absolute beaut!!     And now that you mention the FSM article, I do seem to recall reading [it].

Wonderful job,,, 

I was lucky enough, as a kid, to view (in person) a number of the Mercury launches along with a few Gemini's as well. I have two older brothers that worked on the programs.

Mostly                  thanks for sharing!

 

Bill

Enjoy the ride!

 

  • Member since
    August 2011
Posted by plasticutter on Tuesday, August 23, 2011 11:46 PM

Phillip, I'd like a copy of that article you mentioned about the build-up of the Mercury-Redstone . I too have a 1/48 Mercury capsule that I've been wanting to mate to a Redstone(nee Jupiter) launcher, but I'm also working the Mercury up into a resin project.

  • Member since
    February 2007
Posted by mitsdude on Wednesday, August 24, 2011 10:26 AM

Very nice. I like it.

 

  • Member since
    December 2010
Posted by Phillip1 on Thursday, August 25, 2011 8:56 PM

Give me your e-mail address and I will send you a scanned copy of the article.

Thanks

Phillip1

  • Member since
    February 2007
Posted by mitsdude on Saturday, October 22, 2011 4:38 PM

Phillip,

I recently purchased a "batch" of older Fine Scale magazines and the May 2001 issue was among them. Excellent article.

  • Member since
    January 2018
Posted by DeaconBlues on Monday, January 22, 2018 1:40 AM

Phillip,

Would you mind sending the scans of your 1:48 Mercury Redstone article...?

My email address: artjock47@yahoo.com

Many thanks...!

Frank

  • Member since
    December 2010
Posted by Phillip1 on Tuesday, December 24, 2019 9:13 AM

The original images for this thread are being added back using Postimage.

 

Thanks

Phillip1

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Tuesday, December 24, 2019 1:05 PM

“Dear Lord, please don’t let me Censored up”

Alan B Shepard Jr

 

Beautiful work!

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    December 2019
  • From: Florida, USA
Posted by Niko on Sunday, January 12, 2020 12:14 PM

Gorgeous model, I plan on doing a rocket like this with my father. They are very fun builds!

"The farther back you look, the farther forward you are likely to see." - Winston Churchill

IN PRODUCTION:

Trumpeter KV-2 1940 1/72

Tamiya Flakpanzer IV Wirbelwind 1/48

 

  • Member since
    January 2020
Posted by B777Commander on Sunday, January 12, 2020 4:06 PM
Thank you for sharing. So, let me get this straight, you had to kit bash to build this right? Space seems woefully underrepresented in 1/48.
  • Member since
    December 2010
Posted by Phillip1 on Sunday, January 19, 2020 1:31 PM

B777Commander
Thank you for sharing. So, let me get this straight, you had to kit bash to build this right? Space seems woefully underrepresented in 1/48.
 

Yes, if you want to build this rocket in 1/48 scale you will have to kit bash the Glencoe and Revell kits, plus do a little scracth building.

Thanks

Phillip1

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.