SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Modeling Illness - ASD

1713 views
24 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2014
Posted by BrandonK on Monday, October 19, 2015 8:37 AM

Im sorry, I missed most of this post. I was distracted while staring into the incomplete cockpit through the lens of my magnifier wondering "what more can I do to make this complete?" Is that wrong?

I gotta go now, imcomplete kits are drawing me away.

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    March 2007
  • From: Northeast WA State
Posted by armornut on Saturday, October 17, 2015 8:25 PM

Amen and, glad we have this support group, never read any Longfellow but sounds like he may have been a modeler too. Are you really sure Bish I think ya missed a never in thereBig Smile  fun thread!

we're modelers it's what we do

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, October 17, 2015 2:57 PM

GAF
 
Bish

        BrandonK

It's the model Gods testing you. Are you worthy?

Let us pray, take a deep breath, and escape reality once more by over detailing the bits no one will ever see. 

 

BK

 

Amen brother Brandon.

 

 

 

So... you're saying it's not so much a disease, as it is a fanatical religious devotion?

 

I think that about sums it up.

GAF

I think I understand Longfellow a bit better now:

Though the hands of God build slowly;
Yet they detail exceeding small;
Though with patience He sits waiting,
With exactness details He all.

(With apologies, paraphrased from Longfellow -"Retribution")  Wink

 

 

 

 

That is perfect. That really needs to be carved in stone some where.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

GAF
  • Member since
    June 2012
  • From: Anniston, AL
Posted by GAF on Saturday, October 17, 2015 2:32 PM

Bish

        BrandonK

It's the model Gods testing you. Are you worthy?

Let us pray, take a deep breath, and escape reality once more by over detailing the bits no one will ever see. 

 

BK

 

Amen brother Brandon.

 

So... you're saying it's not so much a disease, as it is a fanatical religious devotion?

I think I understand Longfellow a bit better now:

Though the hands of God build slowly;
Yet they detail exceeding small;
Though with patience He sits waiting,
With exactness details He all.

(With apologies, paraphrased from Longfellow -"Retribution")  Wink

 

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Saturday, October 17, 2015 1:19 PM

BrandonK

It's the model Gods testing you. Are you worthy?

Let us pray, take a deep breath, and escape reality once more by over detailing the bits no one will ever see. 

 

BK

 

 

Amen brother Brandon.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    June 2014
Posted by BrandonK on Saturday, October 17, 2015 12:40 PM

It's the model Gods testing you. Are you worthy?

Let us pray, take a deep breath, and escape reality once more by over detailing the bits no one will ever see. 

BK

On the bench:

A lot !! And I mean A LOT!!

2024 Kits on deck / in process / completed   

                         14 / 5 / 2  

                              Tongue Tied

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, October 16, 2015 2:46 PM

armornut

I think I too have a problem, has anybody else focused so much on one tiny detail that in the celebration of pulling off the detail you overlook a blatantly obvious construction error, ie fantastic photoetch detail but WOW did you see the mold line and punch out mark just north of the amazing price of detail? Can't tell you how many times its happened to me.

 

Nope, never. never never never. Has not happened to me at all.

 

Well, maybe once or twice.................................. ish.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    March 2007
  • From: Northeast WA State
Posted by armornut on Friday, October 16, 2015 2:28 PM

I think I too have a problem, has anybody else focused so much on one tiny detail that in the celebration of pulling off the detail you overlook a blatantly obvious construction error, ie fantastic photoetch detail but WOW did you see the mold line and punch out mark just north of the amazing price of detail? Can't tell you how many times its happened to me.

we're modelers it's what we do

  • Member since
    January 2007
Posted by oldsalty on Friday, October 16, 2015 1:29 PM

Thats Ok, Ive built all the models I have in my mind already..and yes they are perfect! Now, where did I put the invisable tape...lolPirate                                                                                                                                                                                                         OlSalty 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Friday, October 16, 2015 1:12 PM

tempestjohnny
 
GAF

Baron,

I think the two have some similarities, but AMS is a much more serious disease in that modelers actually BUY stuff for detailing models they don't even have, but might purchase one day.

 

Gary

 

 

 

wait a minute. That's not normal?  Oh...boy

 

 

 

Is it not.

 

O bugger

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Friday, October 16, 2015 1:01 PM

GAF

Baron,

I think the two have some similarities, but AMS is a much more serious disease in that modelers actually BUY stuff for detailing models they don't even have, but might purchase one day.

 

Gary

 

wait a minute. That's not normal?  Oh...boy

 

GAF
  • Member since
    June 2012
  • From: Anniston, AL
Posted by GAF on Friday, October 16, 2015 11:39 AM

Baron,

I think the two have some similarities, but AMS is a much more serious disease in that modelers actually BUY stuff for detailing models they don't even have, but might purchase one day.

I've never bought after-market things just because... okay, maybe once...  Sad

Gary

  • Member since
    September 2006
  • From: Bethlehem PA
Posted by the Baron on Friday, October 16, 2015 11:32 AM

Also known as AMS - Advanced Modeler's Syndrome.  "Let's see...this pilot would've had a dollar-fifty in change in his right-hand trouser pocket.  I better scratchbuild that...."

 

The bigger the government, the smaller the citizen.

 

 

  • Member since
    February 2007
  • From: Brunswick, Ohio
Posted by Buckeye on Friday, October 16, 2015 11:17 AM

You guys gave me a much needed laugh today.Big Smile

Mike

  • Member since
    November 2003
  • From: Naples, FL
Posted by tempestjohnny on Friday, October 16, 2015 5:45 AM

Hello,  ASD anonymous. Yes I'd like to attend a meeting I think I have a problem. John

 

  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Thursday, October 15, 2015 9:13 PM

As funny as all that is....I am currently suffering some serious issues from my time at the bench. Countless hours spent with head forward, looking down at the bench...the vertibrae in my neck have started to fuse together...leading to two pinched nerves. The more painful (excrutiating) of the two is much better now, but the other is still causing numbness down my left arm, into my hand...rendering it little more than a "helper". Of course, can't blame it ALL on spending time at the bench, but that does take the lions share of the blame! Some days, it feels like I've turned the corner to healing...other days, not so much. Prognosis is good though...just gotta wait it out and continue the visits to he chiro and p/t. 

 Can't wait to rev up the old guitfiddle again!!! As it is right now, I play about as good as I did when I first picked one up....fingers don't quite go where they're supposed to. BOOOOOO!

  • Member since
    January 2007
Posted by oldsalty on Thursday, October 15, 2015 8:50 PM

Oh yeah now I remember why I joined this forum..To funnyBig Smile Silent & deadly!!                                                                                                                                                           OlSalty

  • Member since
    May 2009
  • From: Poland
Posted by Pawel on Thursday, October 15, 2015 4:09 PM

Hello!

Sorry to hear about your condition...

Would it be possible to build a model OOB (Oot Of the Box = no mods)?

It looks like I'm unable to do that anymore :-( SOS - Save Our Souls!

Getting a job (maybe another one), a baby or falling in love might help here.

Good luck with your builds and have a nice day

Paweł

All comments and critique welcomed. Thanks for your honest opinions!

www.vietnam.net.pl

  • Member since
    September 2011
Posted by fightnjoe on Thursday, October 15, 2015 3:36 PM

Sounds about right to me.  Nothing wrong with this condition.  Perfectly normal.  

 

Joe

Veterans,

Thank You For Your Sacrifices,

Never To Be Forgotten

Where you can find me:

Workbench on FaceBook  Google Plus  YouTube

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, October 15, 2015 2:12 PM

A couple of years ago I built a 72nd He 111 and completely scratch built the rear compartment. Best bit was, it was a 111Z so I had to do it twice.

Can you see it, nope. Would I do it again, yep.

As for the photo's, if your camera has a macro setting you can get nice close up's, even in the one true scale.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

GAF
  • Member since
    June 2012
  • From: Anniston, AL
Posted by GAF on Thursday, October 15, 2015 1:40 PM

I think you guys are enablers!  Contributing to my disease.  It's like... "modeller's porn"!  Stick out tongue

Besides, there not much to show so far, and at 1/72nd, I'm not even sure my camera can capture the detail...  Maybe when I've got the cockpit finished and before I seal her up I'll give it a try.  Big Smile

Gary

  • Member since
    May 2013
  • From: From the Mit, but live in Mason, O high ho
Posted by hogfanfs on Thursday, October 15, 2015 1:18 PM

The third step is to show your work in progress. Some of us other "sick" people really enjoy seeing some extraordinary detailing being perfomed on a subject!

 Bruce

 

 On the bench:  1/48 Eduard MiG-21MF

                        1/35 Takom Merkava Mk.I

 

  • Member since
    December 2002
  • From: Bury St Edmunds, Suffolk, England
Posted by Bish on Thursday, October 15, 2015 1:13 PM
The second step is to give in and go with it.

I am a Norfolk man and i glory in being so

 

On the bench: Airfix 1/72nd Harrier GR.3/Fujimi 1/72nd Ju 87D-3

  • Member since
    September 2012
Posted by GMorrison on Thursday, October 15, 2015 1:05 PM

The first step is to realize you have a problem...

 

That being said-

We want pictures!

 Modeling is an excuse to buy books.

 

GAF
  • Member since
    June 2012
  • From: Anniston, AL
Modeling Illness - ASD
Posted by GAF on Thursday, October 15, 2015 12:43 PM

I think I'm sick.  It's a hard thing to admit, but today I finally realized that I'm suffering from a minor mental disorder that has affected my life for a long time.  I couldn't categorize it immediately as there was not a condition that characterised my form of illness that I could find in the Medical Dictionary.

OCD?  No, I don't think that's it.

Obsessive/ Compulsive Behavior?  No, not exactly.

Unable to find a condition matching my symptoms, I did what any good medical professional would do.   I made something up!   I call it  "Attention Superfluity Disorder", or "ASD".  I pay too much attention to the small things!  Other modelers call it "Detailing".

The realization that I was sick came about when I found myself trying to make a hand-made framework fit into the cockpit of an Italeri WACO CG-4A glider.  The cockpit for this particular model is pretty much fantasy, so I had earlier decided to rip out the rather meager attempt at controls and redo the cockpit.  With online photos to guide me, I redid the seats, added steering wheels made of wire, found a couple of pilots from a Hasegawa jeep kit, and began to build a steel cockpit frame from some wire as the original WACO gliders had.  Today, while redoing a particularly tricky piece of the frame, I suddenly stopped and looked at what I was doing.

This was insane!  The model is 1/72nd, and I had to be mad to try to build a cockpit at this scale, even if it probably wasn't totally accurate.  Who in the world would ever see it?

So I turned off my work lamps and stepped outside to get some air and reconsider my life.  About the only thing I worked out is that I need to extend the framework back into the cargo area if I'm going to show the tie-downs.

I need help!  And a better opti-visor... 

Wink

Gary

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.