SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Searching for source of "Disabled" bullets

1071 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    July 2019
  • From: Vancouver, British Columbia
Posted by Bobstamp on Wednesday, August 31, 2022 10:30 PM

Dodgy

G'day Bob. I can help with an AK-47 round and a standard NATO 7.62 round, but, and it's a big but, I live in Australia and even with primer and propellant removed, I don't know if customs or postal services will allow them.

Thanks for your service mate.

Dodgy

 

Thanks to you, Dodgy, and to everyone who responded. I have doubts that customs or Canada Post will allow them, but they might. I'll see what information I can find.
 
Bob

On the bench: A diorama to illustrate the crash of a Beech T-34B Mentor which I survived in 1962 (I'm using Minicraft's 1/48 model of the Mentor), and a Pegasus model of the submarine Nautilus of 20,000 Leagues Under the Seas fame. 

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Wednesday, August 31, 2022 9:41 AM

Went through my stuff and thought I had a .308 round but its actually 303. No AK ammo either, sorry.

 

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    October 2019
  • From: New Braunfels, Texas
Posted by Tanker-Builder on Wednesday, August 31, 2022 8:58 AM

Hi!

    I imagine you will get a lot of answers. I have gotten these from My Licensed Fire Arms dealer!

  • Member since
    November 2008
  • From: Central Florida
Posted by plasticjunkie on Tuesday, August 30, 2022 10:29 PM

I will look in my reloading items tomorrow. If I have them, I will pull the projectiles and remove the primer and powder then reassemble as a dummy round.

 GIFMaker.org_jy_Ayj_O

 

 

Too many models to build, not enough time in a lifetime!!

  • Member since
    August 2020
  • From: Lakes Entrance, Victoria, Australia.
Posted by Dodgy on Tuesday, August 30, 2022 6:58 PM

G'day Bob. I can help with an AK-47 round and a standard NATO 7.62 round, but, and it's a big but, I live in Australia and even with primer and propellant removed, I don't know if customs or postal services will allow them.

Thanks for your service mate.

Dodgy

I long to live in a world where chickens can cross the road without having their motives questioned

  • Member since
    April 2003
  • From: USA
Posted by keavdog on Tuesday, August 30, 2022 6:53 PM

Thanks,

John

  • Member since
    August 2021
Posted by lurch on Tuesday, August 30, 2022 6:20 PM

Bob your best chance of finding somethinglike that might be a gun show with old ammo. But you might have to have them demilled to get what you want. I have had great success there . I have a german officers rifle from ww2 that was brought home by my great uncle. I was confiscated from a conentration camp .I do not have it anymore . I donated it to a museum . Thought it would be better to have it displayed that to have it in my closet rotting away.. I learned alot at the gun shows about it. You might not find what you want but you may find ways to get what you are looking for. Hope this helps.

  • Member since
    July 2019
  • From: Vancouver, British Columbia
Searching for source of "Disabled" bullets
Posted by Bobstamp on Tuesday, August 30, 2022 6:05 PM

A project that I have in mind has nothing to do with building scale models, but scale-model builders might be able to help, especially if they’re as interested in war and combat as I am.

Among my “collectibles” are two bullets that a friend found on a Civil War battlefield. One is a musket ball ⅝-inch (15.9mm) in diameter, which makes it larger than a 50-calibre bullet. The other is a Minie-ball, half an inch (12.7mm/.50 calibre) in diameter.

I want have a shadow frame made to display these bullets, along with two other bullets which I don’t have — a 7.62×51mm NATO bullet (used by the M-14 battle rifle and a 7.62×39mm bullet for an AK-47. The reasons are simple: I am interested in the development of firearms, especially in ther differences and similarities between early muskets and rifles and their modern counterparts. But my interest is personal, as well: I was seriously wounded in the Vietnam War, by a communist soldier using either a standard issue, Russian-designed AK-47 or an American M14.

I’d be pleased to have just the slugs from either of those cartridges, or cartridges complete except for primer and propellant. If you have a suggestion, please pass it on.

Bob 

Tags: AK-47 , bullets , cartridges , M14

On the bench: A diorama to illustrate the crash of a Beech T-34B Mentor which I survived in 1962 (I'm using Minicraft's 1/48 model of the Mentor), and a Pegasus model of the submarine Nautilus of 20,000 Leagues Under the Seas fame. 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.