SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Incapacitated

6677 views
38 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    June 2010
  • From: Austin, TX
Incapacitated
Posted by DoogsATX on Tuesday, November 29, 2011 9:44 AM

Managed to smash my right thumb in my car door on Sunday night...can't grip anything with it.

Sigh...just get the bench up and running and now this...  Angry

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    September 2011
  • From: Watertown, NY
Posted by JailCop on Tuesday, November 29, 2011 10:04 AM

Yuck, have fun peeling that nail off.  You could try drilling a hole in the center with your pin vise to relieve the pressure.  Would that qualify for an extreme modeler award? lol

  • Member since
    November 2008
  • From: Far Northern CA
Posted by mrmike on Tuesday, November 29, 2011 10:05 AM

OOUUUUUCH!

  • Member since
    March 2003
  • From: Fort Worth, TX
Posted by RESlusher on Tuesday, November 29, 2011 10:08 AM

Ouch!  I'd cry like a little girl!  Crying

My people that work for me can always tell when I'm getting ready for a model contest.  I come to work with both thumbs bandages up after having sliced them open with my exacto...

Richard S.

On the bench:  AFV Club M730A1 Chaparral

On deck:  Tamiya Marder 1A2

In the hole:  Who knows what's next!

 

  • Member since
    October 2007
  • From: Scotland
Posted by Milairjunkie on Tuesday, November 29, 2011 10:11 AM

Nice One!!!

  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Tuesday, November 29, 2011 10:24 AM

Stick that thumb in your pocket and you've got a pocket full of suck, buddy!!!

A few years ago, I was working on some brick pavers....a coworker did something random and stupid. Jokingly I said, "it's OK, it's not YOUR fault you're stupid". I proceeded to randomly and stupidly smash my thumb with a mallet. Jokes on me!!! I feel your pain!

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Tuesday, November 29, 2011 10:27 AM

Didn't quite cry like a girl, but I did swear like a sailor!

I know the nail's going to come off, but I'm dreading it. Other injuries don't phase me that much, but nails coming off gives me the willies for some reason...

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Tuesday, November 29, 2011 10:30 AM

On the bright side, there are worse things...

http://arbroath.blogspot.com/2011/11/man-jailed-for-blasting-co-workers.html

Be careful with those compressors...

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    November 2005
Posted by Anonymous on Tuesday, November 29, 2011 10:39 AM

There's no crying in modeling...

Reminds me of the time I was in a Mk III Command tank outside of Belgorad in early '43...Tank Commander (a battalion commander I shall keep nameless) was chatting with me while leaning on the breech of the 5cm...gunner loosed of a round and the recoil hit him right in the side of the chest...knocked him out for about 10 minutes, collapsed a lung and broke most of his ribs...convalesed for about four months after that...talk about a bruise...  

  • Member since
    November 2009
  • From: SW Virginia
Posted by Gamera on Tuesday, November 29, 2011 10:39 AM

OUCH! Black Eye

Best wishes for a speedy recovery buddy!

"I dream in fire but work in clay." -Arthur Machen

 

  • Member since
    July 2010
  • From: Tornado Alley
Posted by Echo139er on Tuesday, November 29, 2011 11:25 AM

If you MUST build something... then you need to relieve the pressure.

Heat the end of a bent paper clip (or a similar size metal wire) over an open flame until it is red hot. Use a pair of pliers to hold the paper clip during sterilization.

While it is still very hot, touch the tip of it to the injured fingernail. This is not a painful procedure for most people.

The heat of the clip will burn a small hole in the fingernail. It is not necessary to press hard on the fingernail to burn a hole.

As the paper clip is removed, blood should start releasing through the small hole. If not, retry the procedure until blood comes out and pressure is relieved.

 ..and presto.  Back on the bench in a matter of minutes! I have done this multiple times.  Or you can just wait.

  • Member since
    December 2004
  • From: Houston, Texas
Posted by panzerpilot on Tuesday, November 29, 2011 11:26 AM

Ooof !! This brought back a lot of memories from the time I slammed my middle finger in a heavy metal door. I don't know how I didn't lose it. Couldn't sleep for a few days because of the pain! Actually, it did feel a lot better later on when I cut a hole in the fingernail. Get well!

-Tom

  • Member since
    February 2007
  • From: Brunswick, Ohio
Posted by Buckeye on Tuesday, November 29, 2011 11:29 AM

Could be worse, I just had surgery for kidney stones.Black Eye

  • Member since
    November 2005
Posted by Anonymous on Tuesday, November 29, 2011 11:37 AM

Echo139er

If you MUST build something... then you need to relieve the pressure.

Heat the end of a bent paper clip (or a similar size metal wire) over an open flame until it is red hot. Use a pair of pliers to hold the paper clip during sterilization.

While it is still very hot, touch the tip of it to the injured fingernail. This is not a painful procedure for most people.

The heat of the clip will burn a small hole in the fingernail. It is not necessary to press hard on the fingernail to burn a hole.

As the paper clip is removed, blood should start releasing through the small hole. If not, retry the procedure until blood comes out and pressure is relieved.

 ..and presto.  Back on the bench in a matter of minutes! I have done this multiple times.  Or you can just wait.

Reminds me of the time I saw a field surgeon cauterize a shoulder wound using a bayonet heated to a red-glow over an open-fire...near Rostov during the summer of '42...landser was brought in after being caught in some shelling...lay in a field for three days before he was found...wasn't bleeding until they hooked up some IV's then he bled like a sieve...surgeon quickly burned close several bleeders before he bled-out...

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Tuesday, November 29, 2011 11:37 AM

Buckeye

Could be worse, I just had surgery for kidney stones.Black Eye

But you need stones to model, right? Wink Ouch Doogs, you may have to scratchbuild a thumbnail, check with Hans, he's probably done it before. And double-ouch Buckeye - get better, a buddy of mine had the same deal recently.

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Tuesday, November 29, 2011 11:49 AM

I'm sure it'll get me a henpecked campaign ribbon, but the wife's forbidden me from doing any scratchwork on the nail. Got an appointment with the doctor to do basically the same thing...

Irony of ironies, this is also our benefit enrollment period, so I have pages and pages of forms to fill out...and I can't  hold a pen...

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    January 2009
  • From: hamburg michigan
Posted by fermis on Tuesday, November 29, 2011 12:08 PM

Doctor shmoctor, get out a candle and paper clip!Wink

  • Member since
    November 2005
Posted by Anonymous on Tuesday, November 29, 2011 12:23 PM

DoogsATX

I'm sure it'll get me a henpecked campaign ribbon, but the wife's forbidden me from doing any scratchwork on the nail. Got an appointment with the doctor to do basically the same thing...

You are right about that...Congrats! 

Get an X-aCTO blade and drill that M0J0 out...if the pressure is high the blood may spurt a foot or so...

  • Member since
    December 2004
  • From: Houston, Texas
Posted by panzerpilot on Tuesday, November 29, 2011 12:24 PM

Use your other hand. A little 'flesh', with a touch of 'flat earth'. Tell the wife it miraculously healed, then break out the candle and paper clip. No forms!

-Tom

  • Member since
    February 2003
  • From: Rothesay, NB Canada
Posted by VanceCrozier on Tuesday, November 29, 2011 12:28 PM

Fine Scale Medicine?

On the bench: Airfix 1/72 Wildcat; Airfix 1/72 Vampire T11; Airfix 1/72 Fouga Magister

  • Member since
    December 2004
  • From: Houston, Texas
Posted by panzerpilot on Tuesday, November 29, 2011 12:33 PM

VanceCrozier

Fine Scale Medicine?

Love it! That's great!

Reminds of the time, when I was 13, I got a nasty black eye. I used some of my sisters makeup (rouge) to cover it up. Far be it for me to admit I had a black eye!...Especially since it was sister that gave it to me (tough girl).Black Eye

-Tom

  • Member since
    September 2008
  • From: Ancaster, Ontario
Posted by maxfax on Tuesday, November 29, 2011 1:12 PM

I had that happen several months ago- severely painful. I could barely sleep through the night for the intense throbbing. I did as was already mentioned- heated a paper clip to burn a hole through the centre of the nail. I wimped out a bit and had my nurse freeze my finger first though....

On the bench:  Revell 1/72 HCMS Snowberry

 

 

  • Member since
    January 2009
  • From: Edmonton, Alberta
Posted by Griffin on Tuesday, November 29, 2011 2:10 PM

I'll tell you the same thing I tell my kids, "It'll grow back!" Wink

  • Member since
    May 2003
  • From: fort mill SC
Posted by Robert92562 on Tuesday, November 29, 2011 8:31 PM

I know when i'm injured and can't build models.....I buy modeles.....lol.....Oh, I think i used this one....

  • Member since
    November 2005
Posted by Anonymous on Tuesday, November 29, 2011 8:58 PM

Vance, get ready: I'm designing a new badge... 

  • Member since
    June 2010
  • From: Austin, TX
Posted by DoogsATX on Tuesday, November 29, 2011 10:49 PM

Well...doctor said it's a very good thing I didn't drill/stab myself. It's been too long since it happened and opening the hole to dried blood wouldn't do any good and just invite infection. But I've got some rad painkillers and think I found a new doctor. Snark and to-the-pointness are big in my book...

On the Bench: 1/32 Trumpeter P-47 | 1/32 Hasegawa Bf 109G | 1/144 Eduard MiG-21MF x2

On Deck:  1/350 HMS Dreadnought

Blog/Completed Builds: doogsmodels.com

 

  • Member since
    August 2003
  • From: Camp Leatherneck, Afghanistan
Posted by bilbirk on Wednesday, November 30, 2011 12:48 AM

Echo139er

 

If you MUST build something... then you need to relieve the pressure.

Heat the end of a bent paper clip (or a similar size metal wire) over an open flame until it is red hot. Use a pair of pliers to hold the paper clip during sterilization.

While it is still very hot, touch the tip of it to the injured fingernail. This is not a painful procedure for most people.

The heat of the clip will burn a small hole in the fingernail. It is not necessary to press hard on the fingernail to burn a hole.

As the paper clip is removed, blood should start releasing through the small hole. If not, retry the procedure until blood comes out and pressure is relieved.

 ..and presto.  Back on the bench in a matter of minutes! I have done this multiple times.  Or you can just wait.

 

I've tried that before and I've used a pin vise. A lot less painful than what you're going through.

  • Member since
    July 2008
  • From: Vancouver, the "wet coast"
Posted by castelnuovo on Wednesday, November 30, 2011 1:44 AM

So THATs it what they mean when they say "sticks out like a sore thumb" Big SmileBig SmileBig Smile

  • Member since
    March 2003
  • From: Rain USA, Vancouver WA
Posted by tigerman on Wednesday, November 30, 2011 1:57 AM

Get better soon buddy.

   http://i7.photobucket.com/albums/y269/wing_nut_5o/PANZERJAGERGB.jpg

 Eric 

  • Member since
    March 2011
  • From: Gateway to Cape Cod MA
Posted by jb4406 on Friday, December 2, 2011 9:03 AM

Doogs

I feel your pain buddy, broke my elbow on Nov.17 while apprehending a "less than cooperative" suspect. Got the bad guy, but found something wasn't right w/ the arm after the adreneline wore off. Kinda hard to do delicate work w/ one good wing. For now, I'll have to browse the catalogs looking for future projects while I heal........I guess I could always always take this opportunity to straighten up the workbench!

"The difficult, I do  right away. The impossible will take a little longer."

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.