SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Canopy painting

835 views
4 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2013
  • From: Eleva, Wisconsin
Canopy painting
Posted by Greatmaker on Saturday, April 6, 2013 1:57 PM
I was wondering if any of you guys airbrush acrylic paints on your airplane canopies. I'm having a dickens of a time getting the paint to stick. It works fine if I hand paint them but if I use a mask the paint tends to lift off. I've tried various tapes and liquid masks to no avail. I've even sanded the exposed areas after masking but to no avail. Any ideas

Thanks

 

  • Member since
    February 2003
  • From: Medina, Ohio
Posted by wayne baker on Sunday, April 7, 2013 8:05 PM

Take a new blade and cut around the masking before you try to lift it off the canopy?

 I may get so drunk, I have to crawl home. But dammit, I'll crawl like a Marine.

  • Member since
    April 2013
  • From: Eleva, Wisconsin
Posted by Greatmaker on Sunday, April 21, 2013 7:00 PM

Well I gave it my best shot but the paint still chipped off.  The first canopy I coated with pledge masked and airbrushed on the acrylic paint.  I cut around the tape with a sharp knife but it still chipped.  The second canopy I coated the acrylic with dull coat cut with a knife and it stilled chipped

 

  • Member since
    April 2013
  • From: Tampa Bay Area, Florida
Posted by Digital_Cowboy on Sunday, April 21, 2013 7:23 PM

Greatmaker

Well I gave it my best shot but the paint still chipped off.  The first canopy I coated with pledge masked and airbrushed on the acrylic paint.  I cut around the tape with a sharp knife but it still chipped.  The second canopy I coated the acrylic with dull coat cut with a knife and it stilled chipped

GM,

     I forget where I read it, but I recently read that one shouldn't wait until the paint is totally dried/cured before removing the tape for just this reason.

---------------------------------
Digital Cowboy
Live Long and Prosper
On the Bench: '64 Ford Fairlane; '09 Corvette Coupe

  • Member since
    April 2013
  • From: Eleva, Wisconsin
Posted by Greatmaker on Sunday, April 21, 2013 7:38 PM

I didn't wait very long before I removed the tape.  I have much better luck hand painting but  I use a 50/50 mixture of 91% isopropyl alcohol and distilled water.  I think it dries too fast on the canopy and gets clumpy. Today I "patched" the airbrush canopy using acrylic thinned with water and it seemed to go better. The problem I have with the hand painted canopies is that the paint invariably dries glossy but then I don't feel to bad about coating the canopies with pledge to "seal" the acrylic paint

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.