SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

"Best" insignia red?

1508 views
8 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • From: USA
Posted by keavdog on Friday, August 9, 2019 2:02 AM

True North paints have a really nice selection of this category of paints

https://www.truenorthpaints.com/

I used their International Orange - FS 12197 on my T-28

Thanks,

John

  • Member since
    July 2004
  • From: Sonora Desert
Posted by stikpusher on Friday, August 9, 2019 12:29 AM

echolmberg

Hi guys!

I'm working on the Monogram F-82 Twin Mustang kit and it specifies "Insignia Red" (FS 11136) for the outer wing panels and tail section.  I've never built a kit with the red Arctic markings before but I know that there are various opinions on the various shades used.

I'm modeling an F-82 that was stationed at Ladd AFB in Alaska.  Would the Insignia Red be the best color or is there something better out there I should be using?

Thanks!

Eric

 

 

Is it this bird?

 

 

F is for FIRE, That burns down the whole town!

U is for URANIUM... BOMBS!

N is for NO SURVIVORS...

       - Plankton

LSM

 

  • Member since
    January 2014
Posted by Silver on Tuesday, August 6, 2019 7:19 PM

In my old flying days I have spent a weekend in Iceland where I seen the F-102’s in metal finish  with a light guards red style of finish On their tails.Testors Guards red.Atually red w/ a few drops of white.

  • Member since
    September 2012
Posted by GMorrison on Monday, August 5, 2019 10:13 PM

Nice project, Eric. Way back when I built that kit and went to all kinds of trouble to set it up in the SAC scheme. Blue stripes and tails, stars, etc.

And of course, right when I finished it a decal set came out. 

But it's a great little model. The Squadron "In Action" book has a good chapter on it.

 Modeling is an excuse to buy books.

 

  • Member since
    March 2003
  • From: Western North Carolina
Posted by Tojo72 on Monday, August 5, 2019 8:45 PM

I got mine from Ultracolor,looked good.

  • Member since
    September 2005
  • From: North Pole, Alaska
Posted by richs26 on Monday, August 5, 2019 8:32 PM

As per Dana Bell, the early USAF Arctic Red is regular insignia Red until the late '50's when it changed to the flluorescent Orange.  The early USAAC/AAF Arctic Red was an orangier red as denoted by the USAF Museum's O-38F which belonged to the Cold Weather Test Detachment at Ladd Field.  Eric, are you doing FQ-377 which was the very last F-82 used when it was scrapped at Elmendorf AFB in November 1953.  I haven't found any color photos of FQ-377 which show what the spinner color was, red or a blue kind of like USAF Strata Blue.

WIP:  Monogram 1/72 B-26 (Snaptite) as 73rd BS B-26, 40-1408, torpedo bomber attempt on Ryujo

Monogram 1/72 B-26 (Snaptite) as 22nd BG B-26, 7-Mile Drome, New Guinea

Minicraft 1/72 B-24D as LB-30, AL-613, "Tough Boy", 28th Composite Group

  • Member since
    February 2003
  • From: Green Bay, WI USA
Posted by echolmberg on Monday, August 5, 2019 11:00 AM

GMorrison

It depends on the date. Arctic red markings changed at least three times, starting with Insignia Red. Orange markings were added on some aircraft in the late 1950's, and eventually replaced the red by 1970. Those markings were initiasally oranges, later being fluorescent. But I'd suggest in your case "Insignia Red".

 

Thanks G!  Upon checking the instructions, it says the F-82 I'll be replicating was from 1953.  Since that's more towards the early half of the '50s, I guess I'll stick with the insignia red.  

Eric

  • Member since
    September 2012
Posted by GMorrison on Monday, August 5, 2019 10:45 AM

It depends on the date. Arctic red markings changed at least three times, starting with Insignia Red. Orange markings were added on some aircraft in the late 1950's, and eventually replaced the red by 1970. Those markings were initiasally oranges, later being fluorescent. But I'd suggest in your case "Insignia Red".

 Modeling is an excuse to buy books.

 

  • Member since
    February 2003
  • From: Green Bay, WI USA
"Best" insignia red?
Posted by echolmberg on Monday, August 5, 2019 10:37 AM

Hi guys!

I'm working on the Monogram F-82 Twin Mustang kit and it specifies "Insignia Red" (FS 11136) for the outer wing panels and tail section.  I've never built a kit with the red Arctic markings before but I know that there are various opinions on the various shades used.

I'm modeling an F-82 that was stationed at Ladd AFB in Alaska.  Would the Insignia Red be the best color or is there something better out there I should be using?

Thanks!

Eric

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.