SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

My son's new squadron badge

1535 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    November 2005
  • From: Newnan, GA
Posted by J.H. Primm on Tuesday, June 16, 2009 6:35 AM
 MikeV wrote:

 Yamafreak72 wrote:
Ahhh, wonderful New River, right in the middle of lovely Jacksonville NC.  If your son's going to MALS-26 and is describing his job as comm/nav, he's probably going to end up in the 63xx MOS and will be working for I-level Avionics work center 620.  I say probably because I'm a I-level metalsmith, and that's a little outside of my ballpark.  I was at MALS-14 in MCAS Cherry Point for 8 years and got to know a few of the avi guys reasonably well.  Your son won't actually do much work on the aircraft being Intermediate (or "I" level), but will work on the black boxes that the Orginizational (or "O" level) squadron guys pull of the helos and send to his work center.  Last I heard, 26 was a pretty decent unit.  He'll probably get a chance to go on a deployment or two while with the MALS, typically in support of an ACE or Aviation Combat Element.  Good luck and Semper Fi to him and you.

Thanks for the info.

Will this be something that he can use in the private sector such as an airline company or something when he is discharged from the Corps?

 

Absolutely, if he gets an FCC license he should be able to get work just about anywhere and will never go hungry. 

Avionics techs and Sheetmetal techs can ALWAYS find jobs in the aviation industry. The problem is that like with A&P Mechanics, it can be a pain trying to find a company that pays what they are worth, but with a little research, and a willingness to relocate he should be able to find a good job.

I got my A & P license right after I retired and didn't have a problem finding a job, It took me a year or two to find something that really suited me, and I had to compromise as the job was in Louisiana (I would have preferred somewhere else) But the money was good  and eventually I was able to establish enough contacts to land the current gig I am in which pays considerably more. (in excess of 100K ) 

What I find amazing is that the same people who don't blink an eye when shelling out the bucks for $95 / hour maintenance on their Mercedes Benz, will squeal like a stuck pig when they have to pay more than $35 / hour for maintenance on their airplane or helicopter. If the car breaks down, you just pull over to the side of the road and we all know what happens when aircraft stop working.

Hopefully New River, Camp Geiger, Camp LeJeune, and the surrounding areas have changed for the better since I was last there (1977) with HMM-162. I used to avoid Jacksonville altogether and would drive down to Wilmington and Wrightsville Beach during the weekends. 

 

  • Member since
    April 2004
  • From: Georgia
Posted by Screaminhelo on Saturday, June 13, 2009 5:35 AM

It definately won't hurt Mike.  I have known a few guys (mechanics) that have worked in a jounneyman/apprentice capacity while they brushed up for their A&P.  That could be an option in the avionics world but I don't think that it is very common.

The good thing is that if your son is going to be working inside the boxes, he will learn skills that will apply to almost any electronics field.  One of our avionics guys at work started in the Navy and I am amazed at the level of training that he received.  He went through college level electrical theory.

 

Mac

I Didn't do it!!!

  • Member since
    February 2003
  • From: phoenix
Posted by grandadjohn on Wednesday, June 10, 2009 5:27 PM
Maybe, know that's not much of an answer, it will depend on the level of his training and work experience after school. The big thing will be if the FAA requires a license and if the will accept the military training
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Wednesday, June 10, 2009 12:17 PM

 Yamafreak72 wrote:
Ahhh, wonderful New River, right in the middle of lovely Jacksonville NC.  If your son's going to MALS-26 and is describing his job as comm/nav, he's probably going to end up in the 63xx MOS and will be working for I-level Avionics work center 620.  I say probably because I'm a I-level metalsmith, and that's a little outside of my ballpark.  I was at MALS-14 in MCAS Cherry Point for 8 years and got to know a few of the avi guys reasonably well.  Your son won't actually do much work on the aircraft being Intermediate (or "I" level), but will work on the black boxes that the Orginizational (or "O" level) squadron guys pull of the helos and send to his work center.  Last I heard, 26 was a pretty decent unit.  He'll probably get a chance to go on a deployment or two while with the MALS, typically in support of an ACE or Aviation Combat Element.  Good luck and Semper Fi to him and you.

Thanks for the info.

Will this be something that he can use in the private sector such as an airline company or something when he is discharged from the Corps?

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    February 2004
  • From: Quantico, VA
Posted by Yamafreak72 on Wednesday, June 10, 2009 7:50 AM
Ahhh, wonderful New River, right in the middle of lovely Jacksonville NC.  If your son's going to MALS-26 and is describing his job as comm/nav, he's probably going to end up in the 63xx MOS and will be working for I-level Avionics work center 620.  I say probably because I'm a I-level metalsmith, and that's a little outside of my ballpark.  I was at MALS-14 in MCAS Cherry Point for 8 years and got to know a few of the avi guys reasonably well.  Your son won't actually do much work on the aircraft being Intermediate (or "I" level), but will work on the black boxes that the Orginizational (or "O" level) squadron guys pull of the helos and send to his work center.  Last I heard, 26 was a pretty decent unit.  He'll probably get a chance to go on a deployment or two while with the MALS, typically in support of an ACE or Aviation Combat Element.  Good luck and Semper Fi to him and you.
Status: Nastro Azzurro NSR 500- finis!
  • Member since
    April 2003
  • From: Hayward, CA
Posted by MikeV on Tuesday, June 9, 2009 7:23 PM

 ikar01 wrote:
I like it.  What's he doing?

He goes to Pensacola in a week or so to start training. 

I am not sure what his MOS is now but it has something to do with communications on the aircraft. I will update you all when I find out but he is going to be at MCAS New River, NC for 4 years. 

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
  • Member since
    October 2004
  • From: Orlando, Florida
Posted by ikar01 on Tuesday, June 9, 2009 6:53 PM
I like it.  What's he doing?

  • Member since
    April 2003
  • From: Hayward, CA
My son's new squadron badge
Posted by MikeV on Tuesday, June 9, 2009 3:07 PM

This is Andrew's new squadron badge.

Pretty cool I think. Cool [8D]

Wisdom is the right use of knowledge. To know is not to be wise. Many men know a great deal, and are all the greater fools for it. There is no fool so great a fool as a knowing fool. But to know how to use knowledge is to have wisdom. " Charles Spurgeon
JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.