SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Sandbags

2471 views
7 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Tuesday, April 21, 2009 9:06 PM
Hi Hans, took a look for better photos of my sandbags in my dio, but don't seem to have any close ups, I'll unpack it and maybe snap a couple and get 'em up here.
"There you go with those negative waves again!"
  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Tuesday, April 21, 2009 8:47 PM
Heh... Actually, it was your dio with those things that made me decide to post this, rather than try to explain it to you in your thread, lol...

  • Member since
    December 2008
  • From: Las Vegas, Nevada
Posted by model maniac 96 on Tuesday, April 21, 2009 12:59 AM
great tutorial, thanks! no more dealing with those sucking tamiya sandbags!
"Veni, Vidi, Vici" Julius Caesar: I came, I saw, I conquered.
  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Monday, April 20, 2009 8:46 PM

Well, ya got me there, Kelley... I've never used plasticene... Another new technique.. Bring 'em on guys.

Hey, any shots of that dio from a worm's eye-view?

  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Monday, April 20, 2009 4:03 PM

Great tutorial Hans! I've tried the self hardening clay, (different brand, can't remember which one) but found that when it dries, alot of it has cracked, causing my sandbags to look extremely wrong. Dead [xx(] I have used straight plasticine, then brushed on a couple coats of white glue then when the glue dries then I painted them. Been a few years and they still look good! Below is are the plasticine bags.

 

"There you go with those negative waves again!"
  • Member since
    June 2008
  • From: Iowa
Posted by Hans von Hammer on Monday, April 20, 2009 2:49 PM

The gun's 1/35th... The bags, I used my calibrated Mk I Eyeball..  I should mention that if you want to use fewer bags while going higher, you need to make some kind of shoring, either by using "logs" or some kind of picket... Plastruct makes "angle-iron" that works well for pickets..(There's a piece of it in the last picture, behind the MG.)

For casting, I'd probably use an open-mold of RTV and hydro-cal plaster... I'll post that technique later, when I'm in the mood to do some, unless someone else feels like showing off..

 

  • Member since
    April 2008
  • From: Kristiansund, Norway
Posted by Huxy on Monday, April 20, 2009 12:08 PM

Pretty sweet!!!  What scale did you do that in? 1/35 I believe?

And how do you cast? Smile [:)]
 
But as said, pretty sweet tutorial! 
 
-Lasse 

"Every War Starts And Ends With An Invasion".

  • Member since
    June 2008
  • From: Iowa
Sandbags
Posted by Hans von Hammer on Monday, April 20, 2009 11:01 AM

This probably belongs in the "Tip & Techniques" forum, but since it crops up in here a lot, I thought I'd post a quick & dirty Sandbag tutorial for the Nuggets..

Anyone have any other methods, jump on in..

Anyway, this's one method of making sandbags..

Get some Sculpey  or any oven-hardening clay and roll out a chunk about a 1/2" in diameter.

Cut it into slices:

Roll the slices out a bit into "bag" shapes and lay them end-to-end with a little overlap:

Keep layering them, with each layer double the width  of the next one.  If you're going 4-high, there should be 4 rows on the bottom, then the next one 3 rows, then 2, then one.. Place the bags over-lapping the row under it by half... That is, each bag is resting on two bags of the previous rows, like bricks. (Yeah, I know what it looks like, shaddup...)

Add a "Cloth" texture by pressing down on each bag with a fabric-wrapped finger:

Fire the bags in a 275-degree oven (for Sculpey) 30 minutes for each layer and paint when cool.

Now if you need a lot of bags, rather than building the whole thing one bag at a time, you can cast a section in plaster and lay them together, tying them in with some ground material..

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.