1/96 Clipper Donald McKay open ocean diorama

From the other side......each side is different based upon the action of the hull against the water and the pitch and rise of the hull.

Rob

Thanks Flounder.......it takes an eye to see depth and then to try to translate that into a surface.  Dark blue green in trough bottoms and lighter as you reach the wave crest......then some extra added color here and there for detail.  Water is hard stuff to model.....again... thanks for the fine comments.

Rob

Yes...It takes just the first try and you then get confidence.  Just remember......use your medium to its fullest..let the foam fill in the space...then cut away what you need and then add the plaster thinly so your weight stays down.

I'm glad I could be of some help...

Rob

This build will require some different approaches to free hanging gear...to increase the motion aspect of the lines and stowage.....especially sails and their gear.  Using the base as a temporary stand is good...cut I can remove the ship and place it on the bench for the real touchy work..that requires up close work.

Rob

I really like this! You did an awesome job on the water. I've never had the courage to do a water diorama like this, but with your tips I may try it. Definitely gonna follow this thread.

Chris

It's good that you can use the base as a temporary support.  

This, because things like footropes will hang plumb, and not straight down and away from the yards and like.

if you make up coils of line to put over the pin rails, the ones on the high side will hang out away from the side.

Annealed steel wire can be your very great friend here.

Thanks Mike..water has never been a strong modeling media for me...but after plenty of study...I think I got it.  It looks active...yet not over done or cheesy.

Rob

Rob

This is turning out great, hope you'll keep posting!

Mike

I temporarily placed her back into her sea...to check on alignments and how far I need to paint the bottom.

Another angle from the bow...painting the yellow metal sheathing will be next.

Another angle, a bit closer to show main cabin.

Worked on the McKay and finished the decks and painted her black.

It permits you to go above the edge of the sea diorama and below.  Plus you can cut it so nicely into great troughs.  Just remember it expands so secure your model well, or compensate for the expansion.

Thanks.

Rob

Rob

Thanks for the building tips, I use pink foam for my "bases" never thought to use expanding foam for the waves, you have a great idea!

Thanks again for the help.

Mike

Just looking at that painting of the Cutty Sark made me seasick! Now where did I put that Dramamine?

I think this image is better....showing the entire water and hull.

Rob

Yes thunder.....I first build a box..then set the model within and set the angles...then I used spray foam and filled the entire box.....noting that there is 30% expansion when cured.  I then cut the waves in after I had removed the model(I used plastic wrap as a separator on the hull.  I then removed the plastic and then masked off the hull where the water would come in contact.  I replaced the model into the prepared foam and then trawled Dental stone over the foam being careful to create realistic wave crests and to prevent spatula marks from being left.  I made sure that the plaster did not go too high on the hull to lock the hull in.  Once dried, I removed the model and then painted the waves using acrylic paints.  Start from the top of the wave(Lightest to darkest)...then finalized with break water and foam.

To finish off I added apple wood to the base.  I have more sanding and staining to do on the wood and a light coat of satin finish.  A name plate will be fashioned later as well.

Foam core for this size of a sea is a must...it keeps weight down and prevents cracks.

I think it is getting there and I am well pleased with the final result.

Thanks for looking and commenting.

Rob

Notice in this painting of the Cutty Sark that she is right and she is plummeting down a wave crest into the trough......and one time or another the ship will become right, even in a heavy sea.  She is running free with the wind behind her...my build of the McKay will have her yard canted closed hauled and she will be extremely short sailed...probably only lower top sails and for topmast stay sail.

Thanks for commenting..actually she is listing to port 5deg and is as a 28deg rise at the head...she is climbing out of a huge  trough.  I'm using *forced perspective* on this build to elude to a much bigger ocean then is actually present.

Rob

Rob

   Would you share with us  the make up and material of your ocean base, it's very impressive. I look forward to this models completion.

Pretty stunning.

One thing though, she looks to be sailing straight and level and we know that's wrong. Hard to tell without her masts but I would definitely put her on a tack. Up or down at the bow depends on your choice.

The stern