SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

88mm Flak Bunker

9082 views
33 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    April 2003
  • From: CANADA
88mm Flak Bunker
Posted by Kelly_Zak on Tuesday, January 11, 2005 9:15 AM
Tamiya's old 88 kit, a royal pain in the rear to build, but a nice looking kit. I used the kit supplied figures, although they're ancient, no sense in tossing them. The bunker is scratchbuilt, using blue insulation foam, ran through the table saw and then through the compount mitre saw for the angles. The stairs are also foam. Sandbags are scratched out of self hardening clay, and did crack a bit when they dried (real old clay) Got pics of flak installations where the sand bags are actually that size! [:0] Sand is craft sand from Michaels, netting is cheesecloth. Enjoy, comments welcome!











I painted the bunker Quaker Grey craft paint (Delta Brand) and added a straight black artist oil wash. As soon as the wash hit the foam, it's like it almost turned it into real concrete!
"There you go with those negative waves again!"
  • Member since
    February 2003
  • From: Tochigi, Japan
Posted by J-Hulk on Tuesday, January 11, 2005 9:40 AM
Excellent diorama, KAzak!
Those Tamiya figures look fine to me!
~Brian
  • Member since
    October 2004
  • From: kent uk
Posted by shroomy on Tuesday, January 11, 2005 10:37 AM
well i have one of these to build and if it turns out half as good i will be impressed good work :)
  • Member since
    May 2004
  • From: Dallas
Posted by KINGTHAD on Tuesday, January 11, 2005 11:53 AM
Very nice build

Thad
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 11:58 AM
Did you do anything to the foam besides paint it? No plaster or spackle? Looks very inpressive and real. Good work

Ted
  • Member since
    February 2004
  • From: Humble
Posted by rrmmodeler on Tuesday, January 11, 2005 12:01 PM
Cool. Very nice.

Hope to do one of these kits up myself one of these days and I doubt mine will be as good as yours.

Great job
  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Tuesday, January 11, 2005 12:11 PM
Thanks guys for the comments!
tediam, didn't do anything to the foam except lightly sanded the edges. The saw blades smoothed everything out when I was cutting it, and the sandpaper smoothed it out more. That's it.
When I was cutting out the stairs and separating the cutout, some areas actually chipped, but it was for the better, 'cause then it looked like broken concrete!
"There you go with those negative waves again!"
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 12:51 PM
That's amzingly simple with super results.

I have a piece on my book shelf. Need to try it out.

Thanks,

Ted
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 3:51 PM
I like the gun emplacement dio. We need to do/see more of them.

Cheers!

Mike
  • Member since
    April 2004
  • From: sunny imperial beach
Posted by yw18mc on Tuesday, January 11, 2005 4:02 PM
kelly it was your work that I was looking at when I went to bed this morning at 12:30AM. It's now I:55PM in the afternoon,and lo and behold, I'm looking at your work? Just incredible workmanship, and very generous tips on how it all happens. Thanks for sharing your work and secrets with us. Semper Fi, mike
mike
  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Tuesday, January 11, 2005 5:42 PM
Thanks Mike!
I really love showing and letting others know how I achieve these little scenes, any ways of achieving effects, etc. We all learn from each other on how we do things, and in the end it makes all better at our craft. That's why if I find a way of doing something, or find a cool little product I'll share it. Like with Russ and the wedding cake columns for his FAMO, he phoned me, told me about them, I went the next day and picked up some for myself!
"There you go with those negative waves again!"
  • Member since
    July 2003
  • From: Dahlonega, Georgia
Posted by lizardqing on Tuesday, January 11, 2005 6:38 PM
Looks great.
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 6:50 PM
That is some nice detail.
Great Job!
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 7:55 PM
very nice, your dio inspires me to build an 88 now.
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 8:38 PM
great build..... i LOVE the dio
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 8:50 PM
Well done, thanks for the pics...
  • Member since
    May 2003
  • From: The flat lands of the Southeast
Posted by styrene on Tuesday, January 11, 2005 9:20 PM
Nice!

Gip Winecoff

1882: "God is dead"--F. Nietzsche

1900: "Nietzsche is dead"--God

  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 9:44 PM
i built that same kit, it seemed alright, the figs were pretty good, but i hated the fit of the gun to the mount and the little thing on top and around the barrel, i have to redo it cuz it lost some pieces.... it was in my first dio but it turned out really bad....now its a "orphanage" if u will for all the figs i have with out homes....its just a big pile of figs, guns and in the middle of it all is the 88!
Great build!!! Everything i saw from you so far is outstanding!!!
  • Member since
    November 2004
  • From: Canada
Posted by sasd on Tuesday, January 11, 2005 9:58 PM
That construction foamboard is excellent stuff to work with,besides all of the usual
plus` this type of foam offers to modelers it also makes an otherwise heavy dio much lighter but doesn`t lack in strength. Lovely work Kelly.
"Battleing Bastards of Bastogne"
  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Tuesday, January 11, 2005 10:15 PM
Thanks again gang, and thanks to Russ for getting me onto the site, I have so many "homes", some of which there isn't much activity, but here, whoa! LOL Yah, the foam board is lovely stuff, my "Last Days" dio, the entire base is the foam board, just painted up...and man, it's nice and light, and super strong too!
D-D, I know your sentiments exactly, when I installed the barrel, no matter how hard I tried, the whole barrel sits a few degrees off of centre, when you look at it from top down, it sits a bit to the right. I wasn't planning on using the shield, but with out it, it's very noticable, so I had to use it to hide it up a bit.
Oh, I forgot to mention how I did the paint for this build. The whole gun was spraybombed with dark grey Auto Primer (a very good substitute for Panzer Grey it's so close it ain't funny) then I airbrushed on Dark Yellow. Took a knife and started scraping here and there to reveal the grey underneath, to give it a severe chipped look.
"There you go with those negative waves again!"
  • Member since
    November 2005
Posted by Anonymous on Tuesday, January 11, 2005 11:24 PM
It looks great, I'm always amazed at how y'all can breathe new life into the older kits. Great work on the bunker as well.
  • Member since
    June 2004
  • From: East Stroudsburg, PA
Posted by TigerII on Wednesday, January 12, 2005 12:18 AM
Very nice build. The bunker looks great and the weathering on the 88 gun looks very good. We have something in common; we both use cheesecloth for camo netting...Smile [:)].
I recognized 2 of the Tamiya figures from the Pak 40 kit. They fit in perfectly. Good job.

TigerII
Achtung Panzer! Colonel General Heinz Guderian
  • Member since
    April 2004
  • From: The cornfields of Ohio
Posted by crockett on Wednesday, January 12, 2005 1:19 PM
Kelly,

Great dio, but I have to ask.....what do you find so painful about the 88 kit? I built this kit years ago and enjoyed every minute of it. Again, great job on the Flak bunker !

Steve
  • Member since
    November 2005
Posted by Anonymous on Wednesday, January 12, 2005 1:42 PM
I have the kit on my shelf and an aftermarket barrel. This is inspiring me to put it together,

Thanks,

Ted
  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Wednesday, January 12, 2005 1:43 PM
Hi Steve,
LOL well, maybe I exagerated a bit, it was an ok build, but my kit had alot of flash, and ejection pin marks to fill, everything was going ok with the build, but when that gun didn't go on right, that's when I was all like "man, this sucks!" haha
"There you go with those negative waves again!"
  • Member since
    December 2004
  • From: ohio
Posted by vonryan on Wednesday, January 12, 2005 6:42 PM
out standingThumbs Up [tup]Wow!! [wow]!!! thats all i can say!!
  • Member since
    July 2003
  • From: Toronto, Ontario, Canada
Posted by zokissima on Thursday, January 13, 2005 6:01 AM
Kazak, even better than the halftrack dio. Excellent job!
  • Member since
    April 2004
  • From: The cornfields of Ohio
Posted by crockett on Thursday, January 13, 2005 8:19 AM
Kelly,

Well you've certainly made the best of that 88 kit!. I guess the tools are getting a little worn out since I built that baby back in the 80's. Again, stunning work my friend.

Steve
  • Member since
    April 2003
  • From: CANADA
Posted by Kelly_Zak on Thursday, January 13, 2005 9:07 AM
Thanks again guys!
I dunno, I kinda like my halftrack dio...LOL
Just uploading some more pics here, and yes another halftrack dio! ;)
"There you go with those negative waves again!"
  • Member since
    August 2004
  • From: Buffalo NY
Posted by Thehannaman2 on Saturday, January 15, 2005 2:28 PM
Love the concrete. I will definatelty be trying that stuff in the near future. Great work!

Justen

"The distance between genius and insanity is measured only by success."

Member IPMS Niagara Frontier. "The BuffCon Boys."

IPMSUSA Member 45680 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.