Deep Snow

Jmcmenamin wrote:

NOTE: Polyfilla is not avalible in the USA.

This is the same kind of product and maybe easier to find in the US.

Good suggestion Colin. But I was thinking of showing the whole tank just stuck after moving a short distance. I should have given more info. TY

Rather than using foam to build a 'hole' into which the tank will go, I would probably use a razor saw and cut off the lower sections of the running gear and the hull.  Fix that to a base and then the building up of snow only has to be quite shallow to give the impression that the tank has sunk into it.  Just a thought....

Thanks guys. I want to check out Polyfilla. I really like the results I see. I was thinking a Panzer II or III in Russia stuck in deep snow with a few figures. This would be a huge step up for me difficulty level that is. Thanks again!

 NOTE: Polyfilla is not avalible in the USA.

I would recommend Polyfilla: 

This is the special formula for deep holes and cracks from Polyfila.  It's really easy to do: 

1. Pour the Polyfila on the base.

2. Shape it the best you can with a spatula or any other instrument.

3. Let dry on surface (a few hours) The idea is to simulate a crust on the surface with smooth interior.

4. Use the models and figures to make the imprints and footprints.

5. Let it dry overnight.

6. Use sand paper and or dremel to sculpt if desired!

Pretty convincing results and it is still white after several months.  The special formula for deep holes will not crack over time.

Hope this help.

Well, It's not easy just to say without getting an idea of how the scene will look.

I would probally just take some sytrofoam and carve and build up the base around the tank with that. Once I filled in all the areas and was happy with the "depth" and form, I would coat the ground (styrofoam) with a smooth layer of cell-u-clay or plaster. Use a brush to push it up against the edges of the tank. Once that dried, I would get some hairspray and spray a concentrated amount in small area at a time, sprinkling baking soda (or powder) on the area before it dries. Work slowly. If you want it extra fluffy, spray/sprinkle a second or third layer.

I prefer hairspray over white glue because the baking soda won't clump up or start to react (fizzle).

I did it on my Sdkfz dio, and it worked really well:

Good luck. Jason