SEARCH FINESCALE.COM

Enter keywords or a search phrase below:

Alamo Dio in 1/72 scale

3654 views
5 replies
1 rating 2 rating 3 rating 4 rating 5 rating
  • Member since
    February 2004
Posted by dhenning on Thursday, July 24, 2008 11:15 PM
I would suggest a search in the Figures posting on the FSM forum.  I'm thinking that I saw something about maybe priming with Future or some other product. 
  • Member since
    November 2003
  • From: New Mexico
Posted by johncpo on Saturday, July 19, 2008 6:58 PM

Thanks to both of the responses. I have an old set of Revell British in American Revolution that I starte dyears ago. I scrubbed the figures with warm water and dish detergent to remove the oils. I then primed them with white enamel paint.

I never finished them but they will make a good practice session. The idea of using a scouring pad also came to mind as I use them on all my plastic models to scour the plastic which helps the paint adhere better. This might work on the soft plastic as well. I use all acrylic paints and they should be OK as well as I use a hand-held hair dryer on Low heat that sets the paint. Kind of a poor-man's drying oven but it really works to harden the paint.

Thanks again as you have jogged my memory.

johncpo

  • Member since
    February 2003
  • From: Indiana, USA
Posted by cassibill on Saturday, July 19, 2008 12:30 AM
There is something that works well suposedly to prime those soft figs.  For the life of me I can't recall exactly what...I want to say a thin coat of white glue for some reason. I remember priming something with it once and it working but I don't recall what. No idea why I'm making the connection, but I know I painted some green army men years ago using the square Testors enamel that took fairly well.  Maybe after a good scrubbing, that would work to prime them.  I have a bunch of the Imex 1/72s I picked up cheap.  After this weekend, maybe I can do a little experimenting on some sprue.  As it is, we're going to the air show tomm. ... ah today, and and iris thing Sun.

cdw My life flashes before my eyes and it mostly my life flashing before my eyes!!!Big Smile The 1/144 scale census and message board: http://144scalelist.freewebpage.org/index.html

  • Member since
    March 2003
  • From: Newport News VA
Posted by Buddho on Friday, July 18, 2008 10:16 PM
Good luck on the 1/72 scale dios, johncpo. I hated those soft plastic figure because no paint stuck to them!

  • Member since
    November 2003
  • From: New Mexico
Posted by johncpo on Tuesday, July 15, 2008 11:27 AM

  I'll start by thanking all that have read my post. Since the post I've checked up on the suppliers of 1/72 scale Napolean style uniforms as that is what Santa Ana wanted his army to be dressed in during his reign as the Napolean of the West. The uniforms varied from the outlandish to the practical but always colorful.

 Old Revell kits remain, Italeri and Imex are all good as well and available though well-known hobby outlets. Hobbylinc and Internet are two that come to mind. I also discovered a gold mine at Amazon. com that supplies these kits as well and if you already have an account there it is the way to go.

 In all my 45 years of model building in 1/35, 1/48 and 1/87th it never occurred to me until recently that 1/72-76 would be a good choice and now that I have space limitations 1/72 seems the way to go. The kits I mentioned are all good choices and the reviews on each represent good detail. I could go on here but I'll keep further comments for later after I start the building and painting of the figures.

 Until later, again thanks for the input,

 johncpo

  • Member since
    November 2003
  • From: New Mexico
Alamo Dio in 1/72 scale
Posted by johncpo on Thursday, July 10, 2008 10:33 AM

 Greetings all,

  Although I have done scale models for almost all of my life in mostly 1/35 armor and 1/48 aircraft I have yet to do any in 1/72, my HO RR is of course much the same albeit smaller. It's time to go with 1/72 and in the historical diorama relm. The Alamo!

 For the past 2 days I have researched the figures in 1/72 and find the between Italeri, IMEX and Hat that the 3 offer the most variety and complex figure details. I also like the fact the Mexican army at the time had mostly French uniforms, British muskets and a mix of cannon. All available through the 3 manufacturers mentioned.

 Any suggestions as to the brands of soldiers I have mentioned and tips as to the painting of the soft plastic most of them appear to be in. I have a set of British troops form the American Revolution left over somewhere and never really started them because of the type of paint used to prime them was never right. I recently read that black acrylic will work and that is what I use for all my models since about 15 years ago.  

 So; any ideas from anyone who has perhaps built a dio in 1/72 using the model figures I mentioned would be greatly appreciated. I have tons of reference photos from various websites.

 Thanks,

 johncpo

 

JOIN OUR COMMUNITY!

Our community is FREE to join. To participate you must either login or register for an account.

SEARCH FORUMS
FREE NEWSLETTER
By signing up you may also receive reader surveys and occasional special offers. We do not sell, rent or trade our email lists. View our Privacy Policy.